Zavedení
The TC Electronic Infinite Sample Sustainer is a versatile guitar effects pedal designed to sample and sustain your guitar signal, creating rich, ambient pads for you to play over. It features optional layering, an infinite mode for continuous morphing layers, and integrated reverb and modulation effects. The footswitch can be configured for either latching or momentary operation, providing flexible control over your sound.
Konec produktuview
Obrázek 1: Ovládací prvky na předním panelu. Tento obrázek zobrazuje pohled shora dolů view of the Infinite Sample Sustainer pedal, highlighting the Decay, Level, Fade In, and FX Type knobs, along with the Dry/Verb switch, Latch/Momentary switch, and the main footswitch. Input and output jacks are visible on the sides.
Obrázek 2: Úhlové View. Úhlový pohled na pedál, ukázkaasing jeho kompaktní modrý casing and the arrangement of its control knobs and jacks.
Obrázek 3: Připojení zadního panelu. This image shows the rear of the pedal, featuring the DC power input and the USB port for connectivity and firmware updates.
Figure 4: Regulatory Information. The bottom label of the pedal, displaying compliance markings, power requirements (9V === 100mA), and manufacturing details.
Nastavení
Připojení napájení
The Infinite Sample Sustainer pedal requires a 9V DC power supply with a center-negative polarity. Ensure the power supply provides at least 100mA. Connect the power supply to the DC input jack located on the rear of the pedal.
Audio připojení
- Připojte kytaru nebo jiný nástroj k IN konektor na pravé straně pedálu pomocí standardního 6 mm jacku.
- Připojte VEN zvedák na levé straně pedálu k vašemu amplifier or the next pedal in your signal chain using another 1/4" instrument cable.
- For advanced routing, utilize the POSLAT a NÁVRAT jacks to integrate external effects into the pedal's internal FX loop. This allows you to apply other effects specifically to the sustained signal.
Připojení USB
The USB port on the rear of the pedal is used for connecting to a computer for firmware updates and TonePrint editing. Use a standard USB cable to connect the pedal to your computer.
Ovládání pedálu
Ovládání je ukončenoview
- Knoflík DECAY: Controls how quickly the sustained sound fades out. Turn clockwise for longer sustain.
- Knoflík LEVEL: Adjusts the overall output volume of the sustained signal.
- FADE IN Knob: Determines the speed at which the sustained sound fades in after the footswitch is engaged.
- FX TYPE Knob: Selects between different effect types (L1, L2, L3, Infinite, TP1, TP2, TP3).
- L1, L2, L3: Layering modes, allowing you to stack multiple sustained notes or chords.
- Infinite: Creates an indefinite number of layers that gradually morph together, ideal for ambient textures.
- DRY/VERB Switch: Toggles between a dry sustained signal and a sustained signal with integrated reverb.
- LATCH/MOMEN Switch: Configures the footswitch behavior.
- ZÁPAS: Press once to engage sustain, press again to disengage.
- MOMEN (Momentary): Sustain is active only while the footswitch is held down.
- Nožní spínač: Engages and disengages the sustain effect based on the LATCH/MOMEN switch setting.
Základní operace
To activate the sustain effect, play a note or chord and then press the footswitch. The pedal will capture and sustain the sound according to your settings. Experiment with the Decay, Level, and Fade In knobs to shape the sustained sound. Utilize the FX Type knob to explore different layering and infinite sustain possibilities, or load custom TonePrints for unique effects.
Údržba
The TC Electronic Infinite Sample Sustainer pedal is built for durability. To ensure its longevity and optimal performance:
- Udržujte pedál čistý otíráním měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Chraňte pedál před extrémními teplotami, vlhkostí a přímým slunečním zářením.
- Pokud se zařízení delší dobu nepoužívá, odpojte jej od napájení.
- Regularly check all cable connections for secure fit.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk při sešlápnutí pedálu. | Incorrect power supply, faulty cables, incorrect connections, Level knob set too low. | Verify power supply (9V DC, center-negative, 100mA minimum). Check all instrument cables. Ensure IN and OUT jacks are correctly connected. Increase LEVEL knob. |
| Sustain cuts out too quickly. | DECAY knob set too low, LATCH/MOMEN switch set to MOMEN. | Increase DECAY knob setting. If continuous sustain is desired, ensure LATCH/MOMEN switch is set to LATCH. |
| Sustained sound is distorted or noisy. | Input signal too hot, faulty power supply, ground loop. | Reduce input signal level from your instrument or preceding pedal. Try a different power outlet or isolated power supply. Check for ground loop issues in your setup. |
| Cannot load TonePrints. | USB connection issue, outdated TonePrint app, incorrect pedal mode. | Ensure USB cable is securely connected. Update the TC Electronic TonePrint app to the latest version. Follow app instructions for loading TonePrints. |
Specifikace
- Model: NEKONEČNÉ SAMPLE SUSTAINER
- Rozměry (D x Š x V): 4.8" x 2.91" x 1.97" (12.19 cm x 7.39 cm x 5.00 cm)
- Hmotnost: 12 unce (340 gramů)
- Požadavek na napájení: 9V DC, Center-Negative, 100mA minimum
- Hardwarové rozhraní: USB (for TonePrint and firmware updates)
- Formát signálu: Analogový
- Barva: Modrý
Záruka a podpora
TC Electronic products are covered by a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official TC Electronic webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.
For the latest information and software downloads, visit: www.tcelectronic.com
