Vivotek FE9391-EHV-v2 12 Megapixel Outdoor Network Camera User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Vivotek FE9391-EHV-v2 12 Megapixel Outdoor Network Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The Vivotek FE9391-EHV-v2 is an outdoor fisheye network camera designed for surveillance applications, featuring a 12-megapixel sensor, WDR Pro for high-contrast environments, H.265 compression, and Smart IR II technology for night vision up to 20 meters. Its housing is IP66-rated for weather protection and IK10-rated for vandal resistance.

2. Bezpečnostní informace

Observe the following safety precautions to prevent damage to the product or injury to personnel:

• Ensure all power connections are secure and meet specified voltagpožadavky na e (12 voltů).
• Nepokoušejte se kameru rozebírat ani upravovat. Veškerý servis svěřte kvalifikovanému personálu.
• Install the camera in a location that can support its weight and is protected from extreme environmental conditions beyond its IP66 rating.
• Avoid pointing the lens directly at strong light sources for extended periods.
• Use only Vivotek-approved accessories.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• Vivotek FE9391-EHV-v2 Network Camera (1 unit)
• Installation Guide (Printed or Digital)
• Montážní šrouby a kotvy
• Vodotěsný konektor (pokud je k dispozici)

Note: Specific contents may vary. Refer to the packaging for exact details.

4. Nastavení a instalace

This section outlines the steps for physically installing and initially connecting your Vivotek FE9391-EHV-v2 camera.

4.1 Pokyny pro montáž

The FE9391-EHV-v2 is designed for outdoor use and supports wall or desk mounting. Choose a mounting location that provides the desired field of view (180 degrees) and is within reach of network and power connections.

Obrázek 1: Vivotek FE9391-EHV-v2 Fisheye Network Camera. This image shows the white dome-shaped camera with a black central lens area, featuring the Vivotek logo on the top left. The fisheye lens is visible in the center.

4.2 Kroky fyzické instalace

1. Připravte montážní povrch: Mark the drilling points using the provided mounting template (if applicable). Drill holes for the mounting screws and anchors.
2. Zajistěte základnu kamery: Attach the camera's mounting base securely to the prepared surface using the screws.
3. Connect Network and Power:
   • Síť: Connect an Ethernet cable to the camera's RJ45 port. This camera supports Power over Ethernet (PoE), simplifying wiring.
   • Napájení (volitelné): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input. Ensure the power source meets the camera's 22.5 watts requirement.
4. Připevnění těla fotoaparátu: Secure the main camera body to the mounting base. Ensure it is properly aligned and locked into place according to the specific model's mechanism.
5. Nastavení úhlu objektivu: If adjustable, position the fisheye lens to cover the desired surveillance area.

4.3 Počáteční konfigurace sítě

After physical installation, connect the camera to your network. The camera typically obtains an IP address via DHCP. Use Vivotek's IP Search utility or a network scanner to discover the camera's IP address. Access the camera's web rozhraní přes a web browser using its IP address to complete initial setup, including setting a strong password and configuring network settings.

5. Návod k obsluze

This section covers the basic operation of your Vivotek FE9391-EHV-v2 camera through its web rozhraní.

5.1 Přístup k Web Rozhraní

1. Otevřete a web prohlížeč (např. Chrome, Firefox).
2. Enter the camera's IP address in the address bar and press Enter.
3. Log in using your username and password. (Default credentials are often provided in the quick start guide; change them immediately after first login).

5.2 Živě View and Dewarping

Fotoaparát web interface provides a live view of the surveillance area. Due to the fisheye lens, the raw image will appear distorted. The camera features local dewarping capabilities. Navigate to the "Live View" or "Display" section to select various dewarping modes (e.g., 1O, 1P, 1R, 4R) to view the scene in a more conventional perspective.

5.3 Nahrávání a ukládání

Configure recording settings through the web interface. Options typically include:

• Nepřetržité nahrávání: Records constantly.
• Event-Triggered Recording: Records when motion is detected or other events occur.
• Plánované nahrávání: Records during specific times.

Recordings can be stored on a Network Video Recorder (NVR), a local SD card (if supported and installed), or network-attached storage (NAS).

5.4 Detekce pohybu a upozornění

The camera supports motion detection. Configure detection zones and sensitivity levels in the "Event" or "Alarm" settings. Set up alerts such as email notifications or FTP uploads when motion is detected.

6. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho fotoaparátu.

• Čištění objektivu: Gently wipe the lens with a soft, clean, lint-free cloth. For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces. Do not use abrasive cleaners.
• Aktualizace firmwaru: Periodically check the Vivotek website for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the provided instructions carefully during the update process.
• Fyzická kontrola: Regularly inspect the camera housing, mounting brackets, and cables for any signs of damage, corrosion, or loose connections.
• Síťové připojení: Ensure stable network connectivity. Check cable integrity and network device status.

7. Řešení problémů

Tato část obsahuje řešení běžných problémů, se kterými se můžete setkat.

If the problem persists, contact Vivotek technical support.

8. Specifikace

Key technical specifications for the Vivotek FE9391-EHV-v2 Network Camera:

• Model: FE9391-EHV-v2
• Obrazový snímač: 12 megapixelových CMOS
• Rezoluce: 2944 x 2944
• Čočka: 1.22 mm Fixed Fisheye Lens
• Pole View: 180 stupňů
• Komprese videa: H.265, H.264, MJPEG
• Noční vidění: Infrared (IR) up to 20m (65.62 ft) with Smart IR II
• Environmentální hodnocení: IP66 (odolnost proti prachu a vodě)
• Vandal Resistance: IK10
• Příkon: 12 Volts DC or Power over Ethernet (PoE)
• Spotřeba energie: 22.5 wattů
• Konektivita: Wired Ethernet (PoE), Wi-Fi (for certain configurations, though primary is PoE)
• Rozměry: Přibližně 19.69 x 19.69 x 11.02 palce
• Hmotnost: 1.2 kilogramů (2.64 liber)
• Speciální vlastnosti: WDR Pro, Smart Stream III, Smart VCA, Vision Object Analytics, Motion Sensor, Local Dewarp

9. Informace o záruce

Vivotek products typically come with a limited warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official Vivotek webUschovejte si účtenku jako doklad o koupi pro případ reklamace.

10. Technická podpora

For technical assistance, product inquiries, or service requests, please contact Vivotek technical support through their official channels:

• Webmísto: Visit the Vivotek official webweb s zdrojovými zdroji podpory, častými dotazy a kontaktními informacemi.
• Online portál podpory: Access the Vivotek support portal for submitting tickets and finding documentation.
• Telefonická podpora: Refer to the Vivotek website for regional phone support numbers.

When contacting support, please have your camera's model number (FE9391-EHV-v2) and serial number ready.