Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your JOWUA LED Light Bar, designed for Tesla Model 3 and Model Y vehicles. This product enhances interior visibility with its smart sensor and rechargeable battery features.
Bezpečnostní informace
Před použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.
- Nevystavujte zařízení extrémním teplotám ani přímému slunečnímu záření po delší dobu.
- Vyhněte se rozebírání nebo úpravám zařízení, mohlo by dojít ke zrušení záruky a k ohrožení bezpečnosti.
- Keep the device away from water and other liquids. The product is not water resistant.
- Používejte pouze dodaný nabíjecí kabel nebo jeho certifikovaný ekvivalent.
Obsah balení
Ověřte, zda je v balení obsaženo vše:
- 1x JOWUA LED Light Bar
- 1x Universal Cable (USB-C to USB-C, USB-C to Micro USB, USB-A to USB-C, USB-A to Micro USB)
Image: JOWUA LED Light Bar and the included 4-in-1 universal charging cable.
Konec produktuview
The JOWUA LED Light Bar features a sleek design with a wooden handle and frosted plexiglass/acrylic light diffuser. It incorporates both an infrared sensor and a photosensitive sensor for smart operation.
Obrázek: Podrobný view of the JOWUA LED Light Bar highlighting its solid frosted plexiglass/acrylic, log material, 3000K warm light, infrared sensor, and photosensitive sensor.
Nastavení a instalace
Charging the Light Bar
The LED Light Bar has a built-in 500mAh rechargeable lithium battery. To charge, connect the universal cable to the charging port on the light bar and a suitable USB power source.
Image: Close-up of the light bar showing the charging indicator, DC5V IN port, and the ON/OFF/AUTO switch.
Installation in Tesla Frunk (Model 3/Y)
The JOWUA LED Light Bar can be integrated into the frunk of your Tesla Model 3 or Model Y to provide enhanced lighting. This typically involves routing the light strip along the frunk's edge and connecting it to the vehicle's power source.
Video: Installation guide for the JOWUA LED Light Bar in the Tesla Model Y frunk, demonstrating how to secure the light strip and connect it to the power source for illumination.
Video: Demonstration of a frunk LED strip installation, showing the process of attaching the light and connecting it to the power source for illumination.
Video: Installation steps for a frunk LED light strip, detailing how to position and secure the light for optimal illumination.
Video: Short demonstration of a frunk light strip installation, showing the light activating upon opening the frunk.
Placement in Interior Compartments
The light bar can be placed in various interior compartments such as the armrest console, glove box, or trunk for additional lighting. Its magnetic design allows for easy attachment to metal surfaces.
Image: The JOWUA LED Light Bar illuminating the Tesla armrest console, demonstrating its use for interior lighting.
Image: Collage showing the JOWUA LED Light Bar used in various locations: armrest box, glove box, for finding items in the dark, and in the trunk.
Návod k obsluze
Výkon a výběr režimu
Locate the switch on the end of the light bar to select the desired operating mode:
- NA: The light bar will remain continuously on.
- OFF: The light bar will be turned off.
- AUTO: Activates the Smart Sensor Mode.
Režim inteligentního snímače
In AUTO mode, the light bar utilizes both an infrared sensor and a photosensitive sensor. The light will only turn on automatically when it detects motion in a dark environment.
- Snímací vzdálenost: Přibližně 4 metrů.
- Induction Range: 120 stupňů.
- Automatické vypnutí: The light will automatically turn off after approximately 15 seconds of no detected motion.
Image: Diagram illustrating the Smart Sensor Mode features, including sensing distance, auto-off time, and induction range.
Údržba
- To clean the light bar, gently wipe it with a soft, dry cloth.
- Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu.
- Ensure the charging port is free of dust and debris for optimal charging.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Baterie je vybitá. | Charge the light bar using the provided USB cable. |
| Světlo se v režimu AUTO nerozsvítí. | Insufficient darkness or no motion detected. | Ensure the environment is dark enough and motion is within the sensing range. |
| Light turns off too quickly in AUTO mode. | Nebyl detekován žádný nepřetržitý pohyb. | The light is designed to turn off after 15 seconds of inactivity in AUTO mode. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | JOWUA |
| Model | LED světelná lišta |
| Barva | White (light output) |
| Form Factor | Bar |
| Baterie | 500mAh lithium-iontová (dobíjecí) |
| Battery Life (Auto Sensor Mode) | 3-5 měsíce |
| Battery Life (Always Light On Mode) | 8 hodin |
| Materiál | Polyvinyl Chloride (PVC), Log material, Frosted Plexiglass/Acrylic |
| Teplota barvy světla | 3000K teplé světlo |
| Úroveň odolnosti proti vodě | Není odolný vůči vodě |
| Hmotnost položky | 5 unce (0.14 kilogramů) |
| Rozměry balení | 7.36 x 2.17 x 1.65 palce |
Záruka a podpora
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official JOWUA webUschovejte si doklad o koupi pro případné reklamace.
