1. Úvod
This manual provides detailed instructions for the safe installation, operation, and maintenance of your LEDVANCE SF CIRC 400 SEN V 24W 4000K IP44 LED Surface Circular Sensor. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for both indoor and outdoor use, offering efficient lighting with integrated motion and daylight sensing capabilities.
2. Vlastnosti produktu
- Integrated high-frequency detector for reliable motion and daylight sensing.
- Wide beam angle of 120° for broad illumination.
- Protection rating: IP44 for ceiling mounted applications, IP20 for wall mounted applications.
- Impact resistance: IK03, ensuring durability.
- Constructed with a robust aluminum body and a PMMA basin.
- Operating ambient temperature range: -20°C to +40°C.
- Easy adjustment of detector range, daylight detection threshold, and timing.
- High light efficiency and very homogeneous light distribution.
- Designed for energy savings compared to traditional luminaires.
- Non-dimmable functionality.
- Podloženo 3letou zárukou.
3. Bezpečnostní informace
VAROVÁNÍ: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Always disconnect power at the circuit breaker before installation, maintenance, or removal of the fixture.
- Zajistěte přívod objtage is compatible with the luminaire's requirements.
- Produkt žádným způsobem neupravujte. Jakékoli úpravy mohou vést ke ztrátě záruky a k ohrožení bezpečnosti.
- Nedívejte se přímo do LED světelného zdroje, když je rozsvícený.
- Uchovávejte obalové materiály mimo dosah dětí.
4. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- 1 x LEDVANCE SF CIRC 400 SEN V Circular Surface Sensor Light
- Montážní materiál (šrouby, kotvy)
- Návod k použití
5. Nastavení a instalace
This luminaire is designed for ceiling mount installation. Assembly is required.
5.1 Předinstalace
- Vypněte napájení hlavním jističem.
- Carefully unpack the luminaire and inspect for any damage.
- Choose a suitable mounting location on the ceiling, ensuring it is structurally sound and free from obstructions.
5.2 Montáž svítidla
- Separate the mounting base from the luminaire body.
- Position the mounting base against the ceiling at the desired location and mark the drilling points.
- Vyvrtejte otvory a v případě potřeby vložte vhodné hmoždinky do zdi.
- Secure the mounting base to the ceiling using the provided screws.
- Connect the electrical wires (Live, Neutral, Earth) from the ceiling to the corresponding terminals on the luminaire's wiring block. Ensure connections are secure.
- Attach the luminaire body to the secured mounting base, ensuring proper alignment.
- Secure the PMMA basin (diffuser) to the luminaire body.
Obrázek 1: Přední strana view of the LEDVANCE SF CIRC 400 SEN V LED Surface Circular Sensor.
Figure 2: Dimensions of the LEDVANCE SF CIRC 400 SEN V LED Surface Circular Sensor. The diameter is 400mm and the depth is 120mm.
5.3 Po instalaci
Once installation is complete, restore power at the circuit breaker. The luminaire should now be ready for operation.
6. Návod k obsluze
The LEDVANCE SF CIRC 400 SEN V features an integrated high-frequency motion and daylight sensor. These settings can be adjusted to suit your specific needs.
6.1 Nastavení senzoru
The sensor has adjustable dials or switches, typically located on the sensor module, which allow you to customize its behavior. Refer to the markings on the sensor for specific adjustments.
- Detector Range (Sensitivity): This setting controls the detection area of the motion sensor. Adjust it to cover the desired space without triggering unnecessarily.
- Daylight Detection (Lux Level): This determines the ambient light level at which the sensor will activate the light. For example, setting it to a low lux value means the light will only turn on when it's very dark.
- Timing (Hold Time): This sets how long the light remains on after motion is no longer detected.
Experiment with these settings to find the optimal configuration for your application.
7. Údržba
The LEDVANCE SF CIRC 400 SEN V is designed for minimal maintenance.
- Čištění: To clean the luminaire, ensure power is disconnected. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the PMMA basin.
- Žádné díly opravitelné uživatelem: There are no user-serviceable parts inside this luminaire. Do not attempt to open or repair the unit.
8. Řešení problémů
Pokud se se svítidlem setkáte s problémy, podívejte se na následujícího průvodce řešením problémů:
- Světlo se nerozsvítí:
- Zkontrolujte, zda je připojeno napájení a zda je zapnutý jistič.
- Ověřte, zda jsou všechna kabelová připojení bezpečná.
- Adjust the 'Daylight Detection' setting; it might be too high, preventing the light from activating in current ambient light conditions.
- Ensure the 'Detector Range' is set appropriately to detect motion in the desired area.
- Light stays on or turns off unexpectedly:
- Review the 'Timing' setting; it might be set for a longer duration than desired.
- Ensure there is no constant motion or heat source within the detection range that could be continuously triggering the sensor.
- Potential interference from Wi-Fi networks (2.4 GHz): High-frequency sensors can sometimes be affected by 2.4 GHz Wi-Fi signals, causing erratic behavior such as the light staying on. If experiencing this, try adjusting the sensor's position or settings, or consider the proximity of 2.4 GHz Wi-Fi routers. 5 GHz Wi-Fi networks are generally not an issue.
- Blikání světla:
- Zkontrolujte napájecí zdroj pro stabilní objtage.
- Ujistěte se, že všechna elektrická připojení jsou těsná.
9. Specifikace
| Specifikace | Detail |
|---|---|
| Číslo modelu | SF CIRC 400 SEN V 840 IP44 |
| Spotřeba energie | 24 W |
| Teplota barev | 4000 tis |
| Hmotnost položky | 790 gramů |
| Specifický návod k použití | Strop |
| Dokončit typy | Vymalováno |
| Montáž Vyžadována | Ano |
| Počet kusů | 1 |
| Jsou vyžadovány baterie | Žádný |
| Zahrnuté komponenty | 1 x circular surface luminaire |
| Výrobce | LEDVANCE |
| Materiál | Hliník |
| Forma svítidla | Strop |
| Room Type (Applications) | Corridors, Stairs, Bathrooms, Fireplaces |
| Vnitřní/venkovní použití | Uvnitř, venku |
| Zdroj napájení | AC (napájení ze sítě) |
| Typ instalace | Stropní držák |
| Hodnocení ochrany | IP44 (ceiling), IP20 (wall) |
| Odolnost proti nárazu | IK03 |
| Úhel paprsku | 120° |
| Provozní okolní teplota | -20°C až +40°C |
10. Záruka a podpora
This LEDVANCE SF CIRC 400 SEN V LED Surface Circular Sensor comes with a 3-letá záruka od data nákupu, která se vztahuje na vady materiálu a zpracování při běžném používání.
For technical support, warranty claims, or further assistance, please contact LEDVANCE customer service through their official website or your local distributor. Please have your product model number and proof of purchase ready.
