1. Úvod a konecview
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp. This LED luminaire features an integrated light sensor and is designed for general purpose lighting in various indoor environments, including stairs, entrance areas, bathrooms, and hallways. It offers significant energy savings compared to traditional CFL lamps.
Image 1.1: Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp. This image shows the circular LED luminaire, designed for surface mounting on walls or ceilings.
2. Bezpečnostní informace
Před instalací a použitím si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.
- Installation must be performed by a qualified electrician in accordance with national wiring regulations.
- Ensure the power supply is disconnected before installation, maintenance, or any adjustments.
- Produkt žádným způsobem neupravujte. Neoprávněné úpravy mohou vést ke ztrátě záruky a k vytvoření bezpečnostních rizik.
- This product is rated IP44, making it suitable for environments where it may be exposed to splashing water, such as bathrooms. However, it is not suitable for immersion in water.
- Do not cover the luminaire with insulating material.
- Světelný zdroj tohoto svítidla není vyměnitelný; po skončení životnosti světelného zdroje je nutné vyměnit celé svítidlo.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- 1 x Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp
- Montážní materiál (šrouby, hmoždinky)
- Návod k použití
Image 3.1: Product packaging for the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire. The box displays product information and certifications.
4. Nastavení a instalace
Installation is designed to be simple and quick, without requiring specialized tools beyond basic electrical equipment.
- Příprava: Disconnect the main power supply to the installation area at the circuit breaker. Use a voltage tester to confirm that the power is off.
- Místo montáže: Choose a suitable wall or ceiling location. Ensure the surface is flat and can support the weight of the luminaire (390g).
- Značení a vrtání: Use the luminaire's base as a template to mark the drilling points for the mounting screws. Drill holes of appropriate size for the provided wall plugs.
- Zapojení: Connect the electrical wires from the ceiling/wall to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
- Mounting the Luminaire: Secure the luminaire base to the wall or ceiling using the provided screws and wall plugs.
- Attaching the Diffuser: Carefully attach the acrylic diffuser cover to the luminaire base, ensuring it is securely fastened to maintain the IP44 rating.
- Zapnutí: Restore power at the circuit breaker. The luminaire should now be ready for operation.
5. Návod k obsluze
This luminaire features an integrated light sensor for automatic operation. The sensor's range, daylight detection threshold, and light duration can be adjusted.
5.1 Nastavení senzoru
The sensor settings are typically adjusted via small dials or switches located on the luminaire's internal module, accessible after removing the diffuser. Refer to the specific markings on your device for precise adjustment points.
- Dosah senzoru: Adjusts the detection area of the motion sensor.
- Daylight Detection (Lux): Sets the ambient light level at which the sensor will activate the lamp. Napřample, a lower lux setting means the lamp will turn on even in brighter conditions, while a higher lux setting means it will only activate in darker conditions.
- Délka světla: Determines how long the lamp remains illuminated after motion is detected and no further motion is sensed.
Experiment with these settings to find the optimal configuration for your specific application.
6. Údržba
The Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire requires minimal maintenance.
- Čištění: Disconnect power before cleaning. Wipe the exterior of the luminaire with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the acrylic material.
- Inspekce: Periodically check for any signs of damage to the housing or diffuser. If damage is found, disconnect power and contact a qualified electrician for inspection or replacement.
- Světelný zdroj: The integrated LED light source is not user-replaceable. If the light source fails, the entire luminaire must be replaced.
7. Řešení problémů
Pokud se se svítidlem setkáte s problémy, podívejte se na následujícího průvodce řešením problémů:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítidlo se nezapne. | Žádné napájení. Vadné zapojení. Nesprávné nastavení senzoru. | Zkontrolujte jistič. Zkontrolujte zapojení kabeláže (poraďte se s elektrikářem). Adjust daylight detection (Lux) setting. |
| Luminaire stays on continuously. | Neustálý pohyb v detekční oblasti. Nesprávné nastavení senzoru. Porucha snímače. | Ensure no continuous motion. Adjust light duration or daylight detection (Lux) setting. Pokud problém přetrvává, kontaktujte podporu. |
| Luminaire turns on too frequently/infrequently. | Sensor range or daylight detection settings are not optimal. | Adjust sensor range and daylight detection (Lux) settings to suit the environment. |
If the problem persists after attempting these solutions, please contact Ledvance customer support.
8. Specifikace
Detailed technical specifications for the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire.
| Funkce | Specifikace |
|---|---|
| Číslo modelu | SF CIRC 250 SEN V 13W 830 IP44 LEDV |
| Značka | LEDVANCE |
| Typ | Stěna a strop Lamp with Integrated Light Sensor |
| Spotřeba energie | 13 Wattů |
| Světelný tok | 920 lumenů |
| Teplota barev | 3000 Kelvinů (teplá bílá) |
| Úhel paprsku | 120 stupňů |
| Průměrná životnost | 30,000 hodiny |
| svtage | 240 V AC |
| Hodnocení IP | IP44 (odolné proti stříkající vodě) |
| Materiál | Akryl |
| Rozměry (průměr x výška) | 250 mm x 91 mm |
| Hmotnost | 390 gramů |
| Energetická třída | G |
| Speciální funkce | Energy-saving, Integrated Light Sensor |
Image 8.1: Dimensional drawing of the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire, showing a diameter of 250mm and a height of 91mm.
Image 8.2: Polar light distribution diagram for the luminaire, illustrating the 120-degree beam angle and light intensity distribution.
Image 8.3: Illuminance cone diagram showing light levels (lux) at various distances from the luminaire, along with half beam angles.
9. Záruka a podpora
For warranty information and customer support, please refer to the official Ledvance website or contact your local Ledvance distributor. Keep your purchase receipt as proof of purchase for any warranty claims.
Ledvance Contact Information:
- Navštivte Obchod LEDVANCE na Amazonu pro informace o produktu.
- Refer to the official Ledvance website for global support contacts.
10. Aplikace Přamples
The Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire is versatile and suitable for various indoor applications.
Obrázek 10.1: Příkladamples of suitable environments including parking garages, building entrances, and office spaces.
Image 10.2: Additional application examples showing the luminaire in a modern office setting, a classroom, and a gymnasium.
