Lemfema 48-Inch Flexible Stainless Steel Gas Line Connector Kit

Zavedení

This manual provides essential information for the safe and proper installation, operation, and maintenance of your Lemfema 48-Inch Flexible Stainless Steel Gas Line Connector Kit. Please read all instructions carefully before installation and retain this manual for future reference. Improper installation or maintenance can lead to property damage, personal injury, or death.

Důležité bezpečnostní informace

• Doporučená profesionální instalace: Installation of gas lines should be performed by a qualified professional in accordance with all local and national codes and regulations.
• Testování těsnosti: Always perform a leak test after installation using a non-corrosive leak detection solution. Never use an open flame to check for gas leaks.
• Do Not Reuse Fittings: Connectors and fittings are designed for original installation only and may not be reused in other gas appliances or locations.
• Thread Tape Application: The side of the joint connected to the yellow bellows must not be wrapped with raw tape. Otherwise, it will leak. Apply thread tape only to the male pipe threads of the adapter fittings.
• Větrání: Při práci s plynovými spotřebiči zajistěte dostatečné větrání.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x 48-inch Flexible Stainless Steel Corrugated Gas Line (Yellow Coated)
• 1 set x Threaded Tape
• 2 x 15/16 In-16 UN x 3/4 In MIP (Tapped 1/2 In FIP) Adapter Fittings
• 2 x 15/16 In-16 UN x 1/2 In FIP Adapter Fittings
• 2 x 15/16 In-16 UN x 1/2 In MIP (Tapped 3/8 In FIP) Adapter Fittings

Image: Complete contents of the Lemfema 48-inch Flexible Stainless Steel Gas Line Connector Kit, including the yellow-coated hose, multiple adapter fittings, and thread tape.

Konec produktuview

The Lemfema 48-inch Flexible Stainless Steel Gas Line Connector Kit is designed for connecting various gas appliances. The hose features a corrugated design for flexibility and a yellow coating for easy identification and visibility.

Klíčové vlastnosti:

• Odolná konstrukce: Made from 304 stainless steel for high and low temperature resistance, durability, rust resistance, and corrosion resistance.
• Flexibilní design: Corrugated hose allows for easy bending and shaping to fit into tight spaces and around corners.
• Vysoká kapacita: Rated for 106,000 BTU/hr.
• Versatile Fittings: Includes various adapter fittings to accommodate different connection requirements.

Obrázek: Podrobný view of the gas line's inner (1/2 inch ID) and outer (5/8 inch OD) diameters.

Image: Illustration of the three types of adapter fittings provided: 15/16-16UN to 1/2" FIP (Inner) / 3/4" MIP (Outer), 15/16-16UN to 3/8" FIP (Inner) / 1/2" MIP (Outer), and 15/16-16UN to 1/2" FIP (Inner).

Image: The corrugated design of the gas line allows for full flexibility, making it easy to install in various configurations.

Nastavení a instalace

VAROVÁNÍ: Gas installation should only be performed by a licensed professional. Failure to follow these instructions can result in fire, explosion, or carbon monoxide poisoning.

1. Vypněte přívod plynu: Locate the main gas shut-off valve and turn off the gas supply to the appliance.
2. Zkontrolujte komponenty: Before installation, carefully inspect all components for any damage or defects. Do not use damaged parts.
3. Select Correct Fittings: Identify the correct adapter fittings required for your appliance and the gas supply line. The kit includes various sizes to ensure compatibility.
4. Připojení ke spotřebiči: Attach the appropriate adapter fitting to your gas appliance. Apply thread tape to the male pipe threads of the adapter fitting.
5. Připojení plynového potrubí: Connect one end of the flexible gas line to the adapter fitting on the appliance. Ensure a secure, hand-tight connection, then tighten with a wrench as per manufacturer's specifications.
6. Connect to Gas Supply: Attach the other end of the flexible gas line to the gas supply outlet. Apply thread tape to the male pipe threads of the adapter fitting. Ensure a secure, hand-tight connection, then tighten with a wrench.
7. Pozice spotřebiče: Carefully position the appliance without kinking or straining the gas line. The flexible design allows for easy maneuvering.
8. Turn On Gas Supply: Slowly turn on the main gas supply valve.
9. Test těsnosti: Apply a non-corrosive leak detection solution (e.g., soapy water) to all connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately, tighten the connection, and re-test. If the leak persists, contact a qualified professional.

Instalační videa:

Návod k obsluze

Once the gas line is securely installed and leak-tested, your appliance is ready for operation. Refer to your specific appliance's user manual for detailed operating instructions.

• Ensure all connections remain tight and free of leaks.
• Never operate a gas appliance if you suspect a gas leak.
• Maintain proper ventilation in the area where gas appliances are used.

Image: The flexible gas line is suitable for a wide range of indoor and outdoor gas appliances, including stoves, dryers, water heaters, and fireplaces.

Údržba

Regular inspection and maintenance are crucial for the safe and efficient operation of your gas line.

• Pravidelná prohlídka: Visually inspect the gas line and all connections periodically for any signs of wear, damage, kinks, or corrosion.
• Re-test for Leaks: If the gas line or appliance has been moved, or if you suspect a leak, perform a leak test immediately.
• Čištění: Keep the exterior of the gas line clean and free from debris. Use a soft cloth and mild detergent if necessary. Avoid harsh chemicals that could damage the yellow coating or stainless steel.
• Vyhněte se stresu: Do not place heavy objects on the gas line or subject it to excessive bending or pulling.

Odstraňování problémů

If you encounter issues with your gas line, refer to the following common problems and solutions:

Specifikace

• Značka: Lemfema
• Model: B09M2XTDXB
• Materiál: Nerezová ocel (304)
• Barva: Žluť
• Rozměry produktu: 48"D x 0.63"Š
• Nominal Wall Thickness: 0.0625 palců
• Outside Diameter (OD): 5/8 inches (1.9 Centimeters)
• Inside Diameter (ID): 1/2 palce
• Kapacita: 106,000 BTU/hod
• První dostupné datum: 17. listopadu 2021

Záruka a podpora

For any issues with your Lemfema 48-Inch Flexible Stainless Steel Gas Line Connector Kit, please contact Lemfema customer service. Refer to your purchase documentation for specific warranty details. We are committed to providing quality products and support.

If you have questions or require assistance, please visit the Lemfema Store on Amazon or contact us directly through the platform where you made your purchase.