Úvod a konecview
The Memphis Audio 16-MXA2.140 Powersports 2-Channel Amplifier is engineered for durability and performance in challenging environments. This amplifier features a robust design with conformal circuit boards, sealed controls, and upgraded terminals, making it suitable for powersports applications where exposure to elements is common. Its ultra-compact size allows for flexible installation in vehicles with limited space, such as UTVs or motorcycles.
This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio ampživější.
Image: The Memphis Audio 16-MXA2.140 Powersports 2-Channel Ampoživitel, showcasing its compact design and integrated wiring harnesses.
Klíčové vlastnosti
- Ultra-compact design for versatile installation.
- Element-resistant conformal coat board for protection against moisture and dust.
- Sealed wire harnesses to prevent water ingress.
- Efficient Class D design for cool operation and high power output.
- Waterproof control covers for enhanced durability.
- Bass level control for audio customization.
- High and low level inputs for compatibility with various audio sources.
Nastavení a instalace
Správná instalace je klíčová pro optimální výkon a dlouhou životnost vašeho amplifier. It is recommended to have this unit installed by a professional if you are unfamiliar with car audio wiring.
- Místo montáže: Select a secure, dry, and well-ventilated location for the amplifier. The unit is designed for surface mounting. Ensure the location is protected from direct exposure to extreme heat or physical damage.
- Napájení: Connect the main power wire (typically red) from the amplifier to the positive terminal of your vehicle's battery. An inline fuse (not included) should be installed within 18 inches of the battery. The recommended amplifier kit is a 10-gauge kit.
- Uzemnění: Connect the ground wire (typically black) from the amplifier to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid electrical connection.
- Zapínání na dálku: Připojte kabel dálkového zapnutí (obvykle modrý) z amplifier to the remote output of your head unit or an ignition-switched 12V source.
- Zvukový vstup:
- Nízkoúrovňový vstup (RCA): If your head unit has RCA outputs, connect them to the amplifier's low-level inputs.
- Vysokoúrovňový vstup (úroveň reproduktoru): If your head unit does not have RCA outputs, use the provided sealed wire harnesses to connect directly to your head unit's speaker outputs.
- Výstup reproduktoru: Připojte reproduktory k amplifier's speaker output terminals using appropriate gauge speaker wire. Ensure correct polarity.
All wire harnesses are sealed to protect against environmental elements. Ensure all connections are secure and properly insulated.
Návod k obsluze
Jednou amplifier is correctly installed and all connections are verified, you can begin operation.
- Zapnutí: Zapněte zapalování vozidla a hlavní jednotku. ampZařízení Liferier by se mělo automaticky zapnout pomocí kabelu pro dálkové zapnutí.
- Úprava zisku: Carefully adjust the gain control on the amplifier. Start with the gain at its minimum setting and slowly increase it until the desired volume is achieved without distortion. Avoid setting the gain too high, as this can lead to distorted sound and potential damage to speakers.
- Bass Level Control: Use the bass level control to adjust the low-frequency output to your preference. This control allows for fine-tuning of bass response.
- Crossover Settings (if applicable): Pokud váš amplifier includes crossover settings, adjust them according to your speaker type and desired sound profile. Refer to your speaker's specifications for recommended crossover points.
Always ensure your audio source (head unit) volume is at a moderate level before making adjustments on the ampživější.
Údržba
The Memphis Audio 16-MXA2.140 amplifier is designed for minimal maintenance due to its element-resistant construction. However, periodic checks can ensure continued optimal performance.
- Čištění: Periodically wipe down the ampvnější část záchranáře s měkkým, damp hadříkem k odstranění nečistot a nečistot. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
- Kontroly připojení: Annually, inspect all wiring connections (power, ground, remote, input, output) to ensure they remain secure and free from corrosion.
- Ochrana životního prostředí: While element-resistant, avoid prolonged submersion or direct high-pressure water spray. Ensure waterproof control covers are properly seated.
Odstraňování problémů
Pokud máte problémy s vaším amplifier, postupujte podle následujících běžných kroků pro řešení potíží:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Bez napájení / AmpŽivotní stylus se nezapíná |
|
|
| Žádný zvukový výstup |
|
|
| Zkreslený zvuk |
|
|
Pokud tyto kroky problém nevyřeší, kontaktujte zákaznickou podporu nebo kvalifikovaného technika.
Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | RE-MXA2.140 |
| RMS výkon @ 4Ω | 100 wattů x 2 kanály |
| RMS výkon @ 2Ω | 140 wattů x 2 kanály |
| Bridged/Mono Power @ 4Ω | 280 wattů x 1 kanál |
| THD% při 4Ω | <1 % |
| Frekvenční odezva | 20Hz - 20 kHz |
| Rozměry (D x Š x V) | 5.91 x 4 x 1.75 palce |
| Vstupní rozsah | 200mV - 9.1V |
| Doporučeno Amp Kit | 10GKIT (10 Gauge) |
| svtage | 9.1 voltů (provozní) |
| Typ montáže | Povrchová montáž |
Záruka a podpora
This product is listed as "Renewed." Warranty coverage for renewed products can vary. Please refer to the specific warranty terms provided by the seller or the Amazon Renewed program at the time of purchase.
For technical support or further assistance, please contact Memphis Audio customer service or the retailer from whom the product was purchased. Keep your purchase receipt and model number (RE-MXA2.140) readily available when seeking support.