1. Úvod
Thank you for choosing the IMEX ETNA Wall-Mounted Basin Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. Please read this manual thoroughly before installation and keep it for future reference.
The IMEX ETNA faucet is a high-quality mixer designed for wall mounting in basins or bathtubs. It is constructed from durable S316 stainless steel, offering superior resistance to corrosion and high temperatures, ensuring long-lasting performance and a sleek aesthetic.
2. Bezpečnostní informace
- Always ensure that installation is performed by a qualified professional to prevent damage or injury.
- Turn off the main water supply before beginning any installation or maintenance work.
- Zkontrolujte, zda jsou všechna připojení bezpečná a vodotěsná, aby nedošlo k únikům.
- Na povrch kohoutku nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, mohlo by dojít k poškození povrchové úpravy.
- Protect the product from extreme temperatures and direct impact.
- The S316 stainless steel material is highly resistant to corrosion, but proper care is still essential for maintaining its appearance.
3. Konec produktuview
The IMEX ETNA faucet features a minimalist design with two independent components: the spout and the mixer handle. This allows for flexible installation and a clean, integrated look.
Obrázek 3.1: Přední strana view of the IMEX ETNA wall-mounted faucet, showing the curved spout and the separate mixer handle.
Figure 3.2: The IMEX ETNA faucet installed above a modern white basin, demonstrating its wall-mounted application and sleek appearance.
Komponenty:
- hubice: The water outlet, designed for wall mounting.
- Mixer Handle: Controls water temperature and flow.
- Montážní hardware: Necessary components for secure wall installation.
The faucet's dimensions are approximately 21.9 cm (8.6 inches) in length for the spout and 8 cm (3.1 inches) in diameter at its base. The finish is a natural chrome-like appearance derived from the S316 stainless steel material.
4. Nastavení a instalace
This faucet is designed for wall-mounted installation. No special registration box is required for its setup, simplifying the process. Professional installation is highly recommended.
Nástroje a materiály (nejsou součástí balení):
- Nastavitelný klíč
- Šroubovák
- Měřicí páska
- Úroveň
- Vrtat
- Těsnicí páska (teflonová páska)
Kroky instalace:
- Připravte zeď: Ensure the wall surface is clean, dry, and structurally sound. Mark the desired positions for the spout and mixer handle, considering the plumbing connections.
- Install Rough-in Plumbing: Connect the hot and cold water lines to the appropriate rough-in valves within the wall. Ensure these are securely fastened and leak-free.
- Mount the Spout: Insert the spout assembly into its designated wall opening. Secure it firmly using the provided mounting hardware. Ensure it is level and properly aligned.
- Mount the Mixer Handle: Insert the mixer handle assembly into its wall opening. Connect it to the hot and cold water lines and secure it with the mounting hardware.
- Připojení komponent: Ensure all internal connections between the spout and mixer are correctly made according to plumbing standards.
- Zkouška těsnosti: Slowly turn on the main water supply and check all connections for any signs of leaks. Tighten connections as necessary.
- Závěrečná kontrola: Verify proper water flow and temperature control.
Figure 4.1: Technical drawing illustrating the dimensions and internal structure of the IMEX ETNA faucet components for installation reference.
Obrázek 4.2: Režijní náklady view of the IMEX ETNA faucet installed with a basin, providing a perspective on its spatial requirements and design integration.
5. Návod k obsluze
The IMEX ETNA faucet is operated using a single mixer handle, allowing for easy control of both water temperature and flow.
- Zapnutí/vypnutí: Lift the handle to turn on the water flow. Push it down to turn off the water.
- Nastavení průtoku: Čím dále zvednete rukojeť, tím větší bude průtok vody.
- Nastavení teploty: Swivel the handle left for hot water and right for cold water. The central position provides mixed water.
- Funkce úspory vody: This faucet is equipped with a water-saving system. You may notice a slight resistance when lifting the handle past a certain point, indicating a reduced flow rate for water conservation. Pushing past this point will provide full flow.
6. Údržba a péče
Proper maintenance will ensure the longevity and aesthetic appeal of your IMEX ETNA faucet.
- Pravidelný úklid: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Vyhněte se drsným čisticím prostředkům: Do NOT use abrasive cleaners, scouring pads, ammonia-based cleaners, bleach, or any cleaners containing alcohol or organic solvents, as these can damage the stainless steel finish.
- Ložiska nerostných surovin: For hard water areas, mineral deposits may accumulate. Use a solution of vinegar and water (1:1 ratio) applied with a soft cloth, then rinse and dry.
- Zkontrolujte netěsnosti: Periodically check all connections for any signs of leaks. Address any leaks promptly to prevent water damage.
7. Řešení problémů
Pokud narazíte na problémy s kohoutkem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nízký průtok vody | Ucpaný perlátor; částečně uzavřený uzavírací ventil; nízký tlak vody. | Clean or replace aerator; ensure shut-off valves are fully open; consult a plumber for water pressure issues. |
| Únik z výlevky | Opotřebovaná kazeta; nečistoty v kazetě. | Replace the cartridge; clean the cartridge. Professional assistance may be required. |
| Netěsnost u základny/spojení | Loose connections; worn seals/O-rings. | Tighten connections; replace seals/O-rings. |
| Obtížnost s nastavením teploty | Cartridge issue; unbalanced water pressure. | Inspect or replace cartridge; check water supply lines for blockages. |
If the problem persists after attempting these solutions, please contact a qualified plumber or the manufacturer's customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | IMEX (MICE COLLECTION) |
| Model | ETNA GLT023/AC |
| Doporučené použití | Basin or Bathtub |
| Typ montáže | Držák na zeď |
| Typ dokončení | Nerez |
| Materiál | S316 Stainless Steel |
| Barva | Dark S316 Stainless Steel (Chrome-like) |
| Počet úchytů | 1 |
| Zahrnuté komponenty | Mixer Faucet (Spout and Mixer Handle) |
| Požadovaný počet otvorů | 1 (for mixer handle, spout is separate) |
| Speciální funkce | Water-Saving System |
| Délka výtoku | 21.9 cm (přibližně 8.6 palce) |
| Průměr základny | 8 cm (přibližně 3.1 palce) |
9. Záruka a podpora
For information regarding the product warranty, please refer to the terms and conditions provided at the time of purchase or contact your retailer. Typically, products are covered against manufacturing defects for a specified period.
If you require technical assistance, have questions about installation, or need to report a defect, please contact the seller or manufacturer directly. Keep your purchase receipt and product model number (GLT023/AC) handy when contacting support.
