1. Úvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Thermex ID 50 V Shadow Smart vertical electric water heater. Please read these instructions thoroughly before installation and use, and retain them for future reference. This appliance is designed to provide hot water for domestic use.
2. Bezpečnostní informace
Důležité: Installation, maintenance, and repair must be performed by qualified personnel in accordance with local regulations and standards. Failure to comply with these instructions may result in property damage, personal injury, or death.
- Ensure the electrical supply matches the specifications of the water heater (230V, 2000W).
- Spotřebič musí být řádně uzemněn.
- Nepoužívejte ohřívač vody, pokud je poškozený nebo nefunkční.
- Never block the pressure relief valve.
- Udržujte hořlavé materiály mimo dosah ohřívače vody.
- Před prováděním jakékoli údržby nebo čištění odpojte napájení.
- This appliance is equipped with frost protection. However, in areas prone to freezing, additional measures may be necessary if the appliance is not in continuous use.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené:
- Thermex ID 50 V Shadow Smart Electric Water Heater
- Napájecí kabel se zástrčkou
- 3-in-1 Safety Group (includes drain valve, check valve, and pressure relief valve)
- Wall anchors (1 set)
- Návod k použití (tento dokument)
4. Konec produktuview
The Thermex ID 50 V Shadow Smart water heater features a flat, vertical design with a black finish, making it suitable for various installations. It incorporates a digital display and intelligent control modes for efficient operation.
Obrázek 1: Přední strana view of the Thermex ID 50 V Shadow Smart water heater, displaying the digital control panel and water connections at the bottom.
Obrázek 2: Strana view ilustrující štíhlého profesionálafile and vertical mounting bracket of the water heater.
Obrázek 3: Zadní view of the water heater, highlighting the secure mounting points.
Obrázek 4: Detailní view of the digital control panel, displaying temperature and operational modes.
Obrázek 5: Spodní část view showing the hot (red) and cold (blue) water connections.
5. Nastavení a instalace
Professional installation by a certified plumber and electrician is strongly recommended to ensure safety and compliance with all local codes.
5.1 Montáž
- Select a suitable vertical wall location that can support the weight of the water heater when full (approx. 19 kg empty + 43 kg water = 62 kg).
- Zajistěte dostatečný volný prostor kolem jednotky pro údržbu a cirkulaci vzduchu.
- Use the provided wall anchors to securely mount the water heater.
5.2 Vodovodní připojení
- Connect the cold water inlet (blue connection) to your main cold water supply.
- Install the 3-in-1 safety group on the cold water inlet line. This group includes a drain valve, check valve, and pressure relief valve. Ensure it is installed correctly to prevent backflow and overpressure.
- Connect the hot water outlet (red connection) to your hot water distribution system.
- Once connections are made, slowly open the cold water supply valve to fill the tank. Open a hot water tap in your home to allow air to escape until water flows steadily.
- Zkontrolujte těsnost všech spojů.
5.3 Elektrické připojení
- Ensure the power supply is off at the main breaker before connecting the appliance.
- Connect the water heater's power cable to a dedicated, properly grounded electrical outlet.
- The electrical circuit should be protected by an appropriate circuit breaker (10 Amp doporučeno).
6. Návod k obsluze
6.1 Zapnutí/vypnutí
After successful installation and filling the tank with water, switch on the electrical supply. Press the 'On/Off' button on the control panel to activate the water heater.
6.2 Regulace teploty
Use the 'Temperature control' up and down arrows on the control panel to set your desired water temperature. The current temperature will be displayed on the digital screen. The maximum temperature setting is 65 degrees Celsius.
6.3 režimy vytápění
The water heater offers several heating modes, accessible via the 'Heating mode' button:
- Turbo: Provides rapid heating for quick hot water availability.
- Optimální: Balances heating speed and energy efficiency.
- Ekonomika: Prioritizes energy saving by heating water to a lower, but still comfortable, temperature.
- Chytrý: Activates the intelligent learning function.
7. Funkce inteligentního režimu
The 'SMART' mode is designed to optimize energy consumption based on your hot water usage patterns. When activated, the water heater monitors your hot water consumption over a 7-day cycle. It then anticipates future demand, heating water only when needed. During periods of low demand, the water is maintained at a minimum temperature to save energy while ensuring comfort.
8. Údržba
Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho ohřívače vody.
- Inspekce anody: The BIO-glasslined tanks are equipped with two anodes for enhanced corrosion protection. These anodes should be inspected and replaced by a qualified technician periodically, typically every 1-2 years, depending on water quality.
- Přetlakový ventil: Manually operate the pressure relief valve on the safety group at least once a year to ensure it is not blocked. Follow the manufacturer's instructions for the safety group.
- Vypouštění nádrže: If the water heater will be out of use for an extended period or if there is a risk of freezing, drain the tank completely. Refer to the safety group instructions for draining procedures.
- Čištění: Vnější část ohřívače vody očistěte měkkým,amp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
9. Řešení problémů
The Thermex ID 50 V Shadow Smart features self-diagnosis capabilities. If an error occurs, a code may be displayed on the control panel. Refer to the specific error code table in the full manual (if provided separately) or contact customer support.
- Žádná horká voda: Check power supply, circuit breaker, and ensure the unit is turned on. Verify temperature setting.
- Nedostatek teplé vody: Adjust temperature setting, check if 'Economy' mode is active, or if 'SMART' mode is still learning your usage patterns.
- úniky: Immediately turn off water supply and power. Inspect connections. Contact a qualified plumber if the leak persists.
- Neobvyklé zvuky: This could indicate sediment buildup or other internal issues. Contact a qualified technician.
V případě výpadku napájenítage, the appliance will remember its last settings.
10. Technické specifikace
| Specifikace | Hodnota |
|---|---|
| Značka | Thermex |
| Model | ID 50 V Shadow |
| Typ | Vertikální elektrický ohřívač vody |
| Kapacita | 43 litru |
| Instalace | Vertical wall mounting, connections downwards |
| Rozměry (D x Š x V) | 26.3 x 45.3 x 88 cm |
| Prázdná váha | 19 kg |
| Moc | 2000 wattů |
| svtage | 230 voltů |
| Proud | 10 Amp |
| Tlak vody (Min/Max) | 0.05 MPa / 0.6 MPa (0.5 Bar / 6 Bar) |
| Maximální provozní tlak | 0.6 MPa (6 bar) |
| Doba ohřevu | 1 hodina 20 minut |
| Maximální teplota | 65 stupňů Celsia |
| Energetický štítek | B |
| Materiál nádrže | BIO-glasslined steel |
| Speciální funkce | Smart mode, flat design, self-diagnosis, frost protection |
11. Záruka a podpora
Your Thermex ID 50 V Shadow Smart water heater comes with the following warranty:
- Appliance Warranty: 2 roky
- Záruka na nádrž: 5 roky
- Dostupnost náhradních dílů: 10 roky
For warranty claims, technical support, or service, please contact your retailer or the authorized Thermex service center. Ensure you have your proof of purchase and the model number (ID 50 V Shadow) available.
