ERKUL SKYBAR V2 Roof Rack Cross Bars Instruction Manual

1. Úvod

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your ERKUL SKYBAR V2 Roof Rack Cross Bars. Please read all instructions carefully before installation and use to ensure optimal performance and safety.

2. Bezpečnostní informace

• Kapacita zatížení: Nepřekračujte maximální nosnost 165 LBS (75 kg). Always distribute weight evenly across the crossbars.
• Vehicle Owner Manual: Consult your vehicle's owner manual for its maximum roof load capacity. Never exceed the lower of the two ratings (vehicle or crossbars).
• Instalace: Ensure all components are securely fastened before driving. Regularly check the tightness of all bolts and connections, especially after the first few miles and periodically thereafter.
• řízení: Adjust driving speed according to load, road conditions, and weather. Avoid sudden braking, acceleration, or sharp turns when carrying cargo.
• Světlá výška: Be aware of the increased height of your vehicle when the crossbars and cargo are installed. Check for clearance in garages, car washes, and low overhead areas.
• Cargo Security: Always use appropriate tie-downs and straps to secure cargo to the crossbars. Ensure cargo does not obstruct the driver's view nebo zasahovat do provozu vozidla.
• Prevence poškození: To prevent damage to your vehicle's paint finish during installation, place a blanket or protective material on the roof.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené položky:

• Přední příčná tyč
• Zadní příčka
• Keys (for anti-theft locks)
• All Necessary Mounting Hardware
• Návod k instalaci (tento návod)

Obrázek 3.1: Contents of the ERKUL Roof Rack Cross Bars package, including two crossbars, keys, instructions, and mounting hardware.

4. Kompatibilita

These ERKUL SKYBAR V2 Roof Rack Cross Bars are specifically designed for Volvo XC60 models from 2018 to 2026 s flush side rails that include a groove. It is crucial to confirm your vehicle's roof rail type for proper fitment.

Obrázek 4.1: Guide to selecting the correct model and year for compatibility.

Obrázek 4.2: Visual guide illustrating compatibility with flush roof rails that have a groove, and incompatibility with raised, bare, fixed point, or grooveless flush rails.

5. Vlastnosti

• Anti-Theft Locking System: Equipped with an integrated locking mechanism to secure the crossbars to your vehicle and deter theft.
• Aerodynamický design: Engineered with an aerodynamic shape to minimize wind noise and drag during travel, ensuring a quieter ride.
• Flexible Rubber for T-Track Installation: Features flexible rubber strips for trim-free T-track accessory installation.
• Vysoká nosnost: Despite a lightweight aluminum construction, the crossbars offer a robust load capacity of 165 LBS.
• Odolná konstrukce: Made from high-grade aluminum with an anodized coating for enhanced durability and weather resistance.

Obrázek 5.1: Key features of the crossbars, including the anti-theft locking system, aerodynamic shape, and flexible rubber for T-track installation.

6. Nastavení a instalace

Follow these steps for proper installation. For a visual guide, refer to the official installation videos provided.

6.1. Kontrola před instalací

• Vybalte všechny součásti a ověřte je podle seznamu obsahu balení.
• Identify the front and rear crossbars. The front bar is typically longer than the rear bar.
• Ensure your vehicle's roof rails are clean and free from debris.

6.2. Assembling the Crossbars

1. Prepare the End Supports: Use the provided key to unlock and remove the outer cover of each end support.
2. Attach End Supports to Bars: Slide the end supports onto the crossbar. Ensure the pointed end of the crossbar faces the rear of the car and the rounded end faces the front. Insert the screws to secure the end supports, but do not fully tighten them yet. This allows for length adjustment.
3. Upravit délku: Adjust the length of the crossbar by sliding the end supports until they match the width of your vehicle's flush rails.
4. Insert Rubber Strips: Pull out the rubber strip from one end of the crossbar, then push it back into place. This makes it easier to insert the rubber strip into the groove.

6.3. Mounting to Vehicle

5. Position Crossbars: Carefully place the assembled crossbars onto your vehicle's flush rails. Ensure they are centered and positioned at the desired distance (refer to your vehicle's manual for recommended spacing).
6. Bezpečná Clamps: Loosen the screws on the mounting supports to allow the lower clamp to move freely. Position the lower clamp under the side rail.
7. Utáhněte šrouby: Using the provided Allen key, tighten the screws on the mounting supports to firmly secure the crossbars to the vehicle's rails. Ensure both sides are tightened evenly.
8. Lock Covers: Replace the outer covers on the end supports and use the key to lock them. This activates the anti-theft feature.

Obrázek 6.1: Image showing easy installation and a QR code for animation videos. For detailed video instructions, scan the QR code or refer to the videos below.

6.4. Instalační videa

7. Návod k obsluze

The ERKUL SKYBAR V2 crossbars provide a versatile platform for transporting various outdoor gear.

• Načítání: Load items such as bikes, kayaks, fishing gear, camping equipment, surfboards, or skis. Ensure all items are placed securely and do not exceed the stated load capacity.
• Rozložení hmotnosti: Always distribute the weight of your cargo as evenly as possible across the crossbars to maintain vehicle stability.
• Zajištění nákladu: Use appropriate tie-down straps, ropes, or cargo nets to firmly secure all items. Check for any loose items before and during your journey.

Obrázek 7.1: ERKUL Roof Rack Cross Bars installed on a Volvo XC60, demonstrating their use for carrying surfboards.

8. Údržba

• Pravidelná kontrola: Periodically inspect the crossbars and all mounting hardware for any signs of wear, damage, or looseness. Tighten any loose bolts or screws.
• Čištění: Clean the crossbars with mild soap and water. Avoid abrasive cleaners or solvents that could damage the anodized coating.
• Mazání: If the locking mechanism becomes stiff, apply a small amount of graphite lubricant to the keyhole.
• Seasonal Removal: If the crossbars are not in use for extended periods, consider removing them to reduce wear and tear, and potentially improve fuel efficiency.

9. Řešení problémů

• Nadměrný hluk větru: Ensure the rubber strips are properly seated in the T-tracks. Verify that the crossbars are installed with the aerodynamic profile facing forward. Adjusting the spacing between the front and rear bars may also help.
• Volný střih: Re-check all mounting screws and ensure they are tightened to the recommended torque. Confirm that the correct end supports are used for your vehicle's flush rails.
• Difficulty Locking/Unlocking: Ensure the key is fully inserted and turned. If stiff, apply lubricant to the lock mechanism. Do not force the key.

10. Specifikace

11. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official ERKUL AUTO webwebu. Uschovejte si doklad o koupi pro případné reklamace.