Návod k obsluze mířidel Trophy Ridge React Pro s 5 kolíky

Konec produktuview

The Trophy Ridge React Pro 5-Pin Bow Sight is engineered for precision and durability, designed to enhance accuracy for archers. It integrates advanced React Technology for automatic pin adjustments, ensuring consistent performance across various distances. Constructed from high-quality aluminum with stainless steel hardware, this sight is built to withstand rigorous use in diverse environmental conditions.

Figure 1: The Trophy Ridge React Pro 5 Pin Bow Sight, showcasing its robust design and clear sight housing.

This sight features tool-less micro-adjustments for windage and elevation, allowing for quick and precise tuning without the need for additional tools. The 2nd and 3rd axis leveling capabilities further refine accuracy, especially at challenging angles and longer ranges. Ultra-bright fiber optic pins and a glow-in-the-dark ring ensure optimal visibility in low light conditions, complemented by an adjustable click light for enhanced illumination.

Klíčové vlastnosti

• React Technology: Automatically adjusts all 5 pins to the optimal location based on initial sight-in.
• Tool-Less Adjustments: Micro-click windage and elevation adjustments can be made without tools.
• Third Axis Adjustment: Enhances accuracy at severe angles and longer distances.
• Odolná konstrukce: Features stainless steel hardware and solid aluminum construction for longevity.
• Vylepšená viditelnost: Equipped with ultra-bright fiber optic yardage indicators and a glow-in-the-dark ring for various lighting conditions.

Figure 2: Illustrates the simultaneous adjustment of pins, a core benefit of React Technology.

Figure 3: Demonstrates the tool-less micro-adjustments for windage and elevation, and the 2nd/3rd axis leveling.

Figure 4: Close-up of the ultra-bright fiber optic pins, glow-in-the-dark ring, and the rheostat light for low-light conditions.

Nastavení

Montáž zaměřovače

The React Pro sight is designed for easy installation on most compound bows. Ensure your bow is securely held in a vise or stable position before beginning installation. Attach the sight to the bow's riser using the appropriate mounting screws. Verify that the sight is level and securely fastened to prevent movement during use.

Initial Sight-In with React Technology

The React Technology simplifies the sight-in process. Begin by sighting in your 20-yard pin. Once the 20-yard pin is accurately set, proceed to sight in your 30-yard pin. The React Technology will then automatically calibrate the remaining pins (40, 50, and 60 yards) based on these two initial settings. Fine-tune adjustments can be made using the tool-less micro-adjustment knobs for windage and elevation.

Figure 5: The React Pro sight, highlighting its compatibility for both left and right-handed users and various pin sizes.

Návod k obsluze

Using the Sight Pins

After successful sight-in, use the appropriate pin for your target distance. The pins are calibrated for 20, 30, 40, 50, and 60 yards. Always confirm your target distance before selecting a pin. The ultra-bright fiber optics ensure clear visibility of the pins in varying light conditions.

Adjustable Click Light

The sight includes an adjustable click light to illuminate the fiber optic pins in extremely low light or dark environments. To activate, rotate the light's knob. Adjust the brightness by continuing to rotate the knob. This light is designed to illuminate only the fiber optics, preventing excess light spill that could distract or spook game.

Údržba

• Čištění: Regularly clean the sight with a soft, dry cloth to remove dust and debris. For stubborn dirt, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte agresivní chemikálie ani abrazivní materiály.
• Inspekce: Periodically inspect all screws and mounting hardware to ensure they are tight. Check the fiber optic pins for any damage or fraying.
• Skladování: Store the sight in a dry, protected environment when not in use to prevent corrosion and damage.
• Výměna baterie: If the adjustable click light dims or stops working, replace its battery. Refer to the light's specific instructions for battery type and replacement procedure.

Odstraňování problémů

Problémy s přesností

• Inconsistent Grouping:
  • Ensure all sight mounting screws are securely tightened.
  • Verify that your bow's draw weight and arrow speed are consistent. The React system performs optimally with arrow speeds of at least 240 fps. If your setup is slower, the automatic pin calibration may be less accurate. Consider having your bow chronographed at a pro shop.
  • Check for any loose components on the sight itself, including the pin adjustments and locking knobs.
• Pins Not Aligning Correctly:
  • Re-perform the initial 20-yard and 30-yard sight-in procedure carefully, ensuring precise adjustments at each distance.
  • Confirm that the 2nd and 3rd axis leveling adjustments are correctly set for your shooting style and bow setup.

Adjustable Light Not Working

• Bez osvětlení:
  • Check if the battery is correctly installed and not depleted. Replace with a new battery if necessary.
  • Ensure the light's knob is fully rotated to the 'on' position.
  • If the light still does not function after battery replacement, contact Trophy Ridge customer support for assistance.

Specifikace

Záruka a podpora

The Trophy Ridge React Pro 5 Pin Bow Sight comes with a manufacturer's warranty. For specific details regarding warranty coverage, claims, or technical support, please refer to the official Trophy Ridge webwebu nebo se přímo obraťte na jejich zákaznický servis.

You can also visit the official Trophy Ridge Store for more product information and support resources:

Visit the Trophy Ridge Store