Konec produktuview
The Link2Home Zigbee Thermostatic Radiator Valve allows precise control over your home's heating system, enabling room-by-room temperature management. This smart valve integrates with the Link2Home ecosystem, offering remote control via the Link2Home Pro application. It is designed to help optimize energy consumption by heating only the rooms you use.
Poznámka: A Link2Home Zigbee Gateway (Model LTHZGBEGWAY, sold separately) is required for smart control functionality.
Obsah balení
Image: The Link2Home Zigbee Thermostatic Radiator Valve shown with various adapters and a screw, indicating included installation accessories.
Váš balíček by měl obsahovat:
- Link2Home Zigbee Thermostatic Radiator Valve
- Various radiator adapters
- Mounting screw and nut
- Uživatelská příručka (tento dokument)
Před zahájením instalace se ujistěte, že jsou přítomny všechny komponenty.
Nastavení a instalace
1. Instalace baterie
Obrázek: Shora dolů view of the radiator valve, highlighting the battery compartment symbol on its body.
- Gently twist and remove the top cover of the valve to access the battery compartment.
- Vložte dvě (2) baterie typu AA a dbejte na správnou polaritu (+/-).
- Replace the top cover, twisting it until it clicks securely into place.
2. Fyzická instalace na radiátoru
Image: The Link2Home radiator valve mounted horizontally on a standard white panel radiator, demonstrating a typical installation.
- Demontujte stávající termostatickou hlavici radiátorového ventilu.
- Select the appropriate adapter from the included accessories that fits your radiator valve body.
- Attach the selected adapter to the radiator valve body.
- Mount the Link2Home Zigbee Thermostatic Radiator Valve onto the adapter. It can be mounted vertically or horizontally.
- Secure the valve firmly in place.
3. Pairing with Link2Home Zigbee Gateway and App
This valve requires a Link2Home Zigbee Gateway (LTHZGBEGWAY) for smart control. Ensure your gateway is set up and connected to your home network.
- Download the Link2Home Pro app from your smartphone's app store (available for Android and iOS).
- Otevřete aplikaci a podle pokynů přidejte nové zařízení.
- Put your Link2Home Zigbee Gateway into pairing mode (refer to your gateway's manual for specific instructions).
- On the radiator valve, press and hold the pairing button (usually indicated by a network symbol or located under the cover) until the display shows a pairing indicator.
- Once successfully paired, the valve will appear in your Link2Home Pro app.
Návod k obsluze
Ruční ovládání
Obrázek: Boční view of the Link2Home radiator valve, showing its cylindrical body and the integrated display screen.
- The valve features an LCD screen for local temperature display and settings.
- Rotate the dial on the valve to manually adjust the desired temperature. The new setting will be displayed on the LCD.
- The valve provides precise temperature control at 0.5° increments.
App Control (Link2Home Pro)
- Open the Link2Home Pro app on your smartphone or tablet.
- Select the specific radiator valve you wish to control.
- From the app, you can remotely turn off or adjust the temperature for each individual valve.
- Utilize the app's scheduling features to set heating programs for different times and days.
- Monitor energy consumption, view usage reports, and track heating trends directly within the app.
Hlasové ovládání
The Link2Home Zigbee Thermostatic Radiator Valve is compatible with voice assistants such as Alexa, Google Assistant, and Siri (via Link2Home Pro app integration). Follow the instructions within the Link2Home Pro app to link your device with your preferred voice assistant.
- Example commands: "Alexa, set the living room temperature to 21 degrees." or "Hey Google, turn off the bedroom radiator."
Údržba
Výměna baterie
The valve requires two (2) AA batteries. When the battery level is low, an indicator will typically appear on the valve's LCD screen and within the Link2Home Pro app. Replace batteries as described in the 'Battery Installation' section of this manual.
Čištění
To clean the valve, gently wipe its surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
Odstraňování problémů
- Ventil nereaguje: Zkontrolujte, zda jsou baterie správně vloženy a zda jsou dostatečně nabité. V případě potřeby baterie vyměňte.
- Nelze se připojit k aplikaci: Ensure your Link2Home Zigbee Gateway is powered on, connected to the internet, and within range of the radiator valve. Try re-pairing the device as per the 'Pairing' instructions.
- Nesprávné údaje o teplotě: Ensure the valve is not obstructed by curtains or furniture, which can affect temperature sensing.
- Radiator not heating/cooling: Verify that the desired temperature in the app or on the valve is set correctly. Check your central heating system for proper operation.
- Problémy s hlasovým ovládáním: Confirm that the valve is correctly linked to your voice assistant account via the Link2Home Pro app. Check your internet connection.
For further assistance, please refer to the Link2Home Pro app's help section or contact Link2Home customer support.
Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Link2Home |
| Číslo modelu | LTHTRVZGE |
| Barva | Bílý |
| Rozměry (D x Š x V) | 1 x 1 x 1 cm |
| Hmotnost položky | 210 g |
| Zdroj napájení | Napájení z baterií (2x AA) |
| Podsvícení | Ano |
| Typ ovladače | Google Assistant (and other smart assistants via app) |
Záruka a podpora
For information regarding warranty coverage, please refer to the documentation provided with your purchase or visit the official Link2Home website. For technical support, troubleshooting assistance, or any product-related inquiries, please contact Link2Home customer service through their official channels.
You can often find support contact details within the Link2Home Pro app or on the Link2Home official webmísto.
