Zavedení
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Tolsen 20in Gasoline Chain Saw (Model TLSN-79614). Please read this manual thoroughly before operating the chain saw to ensure proper use and to prevent injury or damage.
The Tolsen 20in Gasoline Chain Saw is designed for cutting wood, such as felling small trees, limbing, and bucking. It features a powerful 52cc 2-stroke engine with a rated power of 2000W (2.6Hp) and a 20-inch cutting bar.
Obrázek 1: Tolsen 20in Gasoline Chain Saw. This image shows the complete chain saw assembly, highlighting its robust design and 20-inch bar.
Obecná bezpečnostní upozornění
- Vždy používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, chráničů sluchu, rukavic a pevné obuvi.
- Never operate the chain saw when fatigued, under the influence of alcohol, drugs, or medication.
- Keep bystanders, children, and animals at a safe distance from the work area.
- Inspect the chain saw before each use for any damage, loose parts, or fuel leaks.
- Ensure the chain brake is functional and engaged when starting the engine or moving between cuts.
Nastavení a montáž
1. Vybalení a kontrola součástí
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts diagram (not included in this text, but typically found in a physical manual) to identify each component.
2. Příprava palivové směsi
This chain saw uses a 2-stroke engine and requires a specific fuel-to-oil mixture. Use high-quality unleaded gasoline and a premium 2-stroke engine oil designed for air-cooled engines. Refer to the engine manufacturer's recommendations for the exact mixing ratio (typically 25:1 or 50:1, depending on oil type). The fuel tank capacity is 560ml.
- Mix fuel in a separate, approved fuel container.
- Shake the mixture thoroughly before pouring into the fuel tank.
- Always refuel in a well-ventilated area with the engine off and cool.
3. Instalace řetězu a vodicí lišty
- Ujistěte se, že brzda řetězu je zapnutá.
- Remove the side cover by loosening the nuts.
- Nasaďte vodicí lištu na čepy a ujistěte se, že čep napínáku řetězu je zarovnán s otvorem v liště.
- Carefully fit the saw chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction. The chain pitch is 3/8in (0.325in).
- Nasaďte zpět boční kryt a ručně utáhněte matice.
- Adjust chain tension: The chain should be snug against the guide bar but still able to be pulled freely by hand. There should be no slack on the underside of the bar.
- Pevně utáhněte matice bočního krytu.
4. Bar and Chain Oil
Fill the oil tank (capacity 260ml) with high-quality bar and chain oil. This oil lubricates the chain and guide bar during operation, reducing friction and wear. Do not use engine oil or waste oil.
Návod k obsluze
1. Spuštění motoru
The Tolsen chain saw features an easy starting system with an automatic choke.
- Place the chain saw on a firm, flat surface. Ensure the chain brake is engaged.
- Několikrát stiskněte pumpičku, dokud nebude vidět palivo.
- Nastavte páčku sytiče do polohy „PLNÝ SYTIČ“.
- Pevně a rovnoměrně zatáhněte za startovací šňůru, dokud se motor nenastartuje (obvykle stačí několik tahů).
- Once the engine fires, immediately push the choke lever to the "HALF CHOKE" or "RUN" position.
- Znovu zatáhněte za startovací šňůru, dokud motor nenaskočí a nebude běžet hladce.
- Allow the engine to warm up for a few moments at idling speed (3200rpm ±5%).
- Před zahájením řezání uvolněte brzdu řetězu.
2. Operating Safety Features
- Safety Throttle Lever: This lever prevents accidental acceleration. It must be depressed along with the main throttle trigger to engage the engine.
- Rapid Reaction Chain Brake: The chain brake is a crucial safety device designed to stop the chain instantly in the event of kickback or other emergencies. Always ensure it is functional before use.
3. Techniky řezání
Always maintain a firm grip with both hands on the chain saw handles. Stand with your feet apart for good balance. Plan your cuts to avoid kickback and ensure the tree or limb falls in the intended direction.
Obrázek 2: Tolsen 20in Gasoline Chain Saw positioned for operation. This image illustrates the chain saw ready for use on the ground, demonstrating its practical application.
- Kácení: Involves making a notch cut and a felling cut to direct the tree's fall. Requires careful planning and assessment of the tree's lean and surrounding area.
- Odnožování: Removing branches from a felled tree. Work from the base of the tree towards the top, cutting smaller branches first.
- Vzpírání: Cutting a felled tree into sections. Support the log to prevent pinching the chain.
WARNING: Be aware of kickback. Kickback occurs when the moving chain at the tip of the guide bar contacts an object, or when the wood closes in and pinches the saw chain in the cut. This can cause a rapid, uncontrolled upward and backward movement of the guide bar towards the operator.
Údržba
Regular maintenance ensures the longevity and safe operation of your chain saw. Always ensure the engine is off and cool, and the spark plug cap is disconnected before performing any maintenance.
1. Čištění vzduchového filtru
The chain saw is equipped with a long-life air filter that can be cleaned repeatedly. A dirty air filter reduces engine performance and increases fuel consumption.
- Odstraňte kryt vzduchového filtru.
- Opatrně vyjměte vložku vzduchového filtru.
- Clean the filter by tapping it gently or using compressed air. For heavily soiled filters, wash with warm soapy water, rinse thoroughly, and allow to dry completely before reinstallation.
- Reinstall the dry air filter and secure the cover.
2. Chain Sharpening and Tension
- Ostření: A sharp chain is crucial for efficient and safe cutting. Sharpen the chain regularly using a round file of the correct diameter for the chain pitch (3/8in or 0.325in). Follow the manufacturer's recommended sharpening angles.
- Napětí: Check chain tension frequently. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand. Adjust as needed.
3. Kontrola zapalovací svíčky
Inspect the spark plug periodically. Clean any carbon deposits and check the electrode gap. Replace the spark plug if it is fouled or worn.
4. Generální úklid
After each use, clean the chain saw thoroughly. Remove sawdust, debris, and oil residue from the engine fins, air intake, and around the chain and guide bar. This prevents overheating and ensures proper operation.
Odstraňování problémů
This section addresses common issues you might encounter with your Tolsen chain saw.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nestartuje | Žádné palivo nebo nesprávná směs paliva Sytič není správně nastavený Zapalovací svíčka znečištěná nebo vadná Brzda řetězu aktivována | Zkontrolujte hladinu paliva a směsi Nastavení páčky sytiče Vyčistěte nebo vyměňte zapalovací svíčku Uvolněte brzdu řetězu |
| Motor běží, ale řetěz se nepohybuje | Brzda řetězu aktivována Clutch issue Řetěz se zasekl | Uvolněte brzdu řetězu Poraďte se s kvalifikovaným servisním technikem Clear any debris from around the chain and bar |
| Špatný řezný výkon | Tupý řetěz Nesprávné napnutí řetězu Insufficient bar and chain oil | Naostřete řetěz Upravte napnutí řetězu Fill oil tank with bar and chain oil |
| Motor se přehřívá | Znečištěný vzduchový filtr Blocked cooling fins Nesprávná směs paliva | Vyčistěte vzduchový filtr Vyčistěte chladicí žebra Ensure correct fuel-to-oil ratio |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Tolsen customer support or a qualified service technician.
Specifikace
| Funkce | Detail |
|---|---|
| Značka | Tolsen |
| Číslo modelu | TLSN-79614 |
| Objem motoru | 52 ccm |
| Typ motoru | Powerful 2-stroke engine |
| Jmenovitý výkon | 2000W / 2.6Hp |
| Rychlost naprázdno | 3200rpm ±5% |
| Max. Průměr řezu | 500mm (20in) |
| Rozteč řetězu | 3/8in (0.325in) |
| Kapacita palivové nádrže | 560 ml |
| Kapacita olejové nádrže | 260 ml |
| Hmotnost položky | 7.65 kg |
| Rozměry produktu | 50 l x 26.5 š x 30 v centimetrů |
| Klíčové vlastnosti | Long life air filter, Easy starting - Automatic choke, Safety throttle lever, Rapid reaction chain brake |
Záruka a podpora
For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Tolsen webwebu. Uschovejte si účtenku jako doklad o koupi.
For technical assistance, spare parts, or service inquiries, please contact Tolsen customer support. Contact details can typically be found on the product packaging or the official Tolsen webmísto.
