1. Úvod
Thank you for choosing the WORKPRO 3.0 Amp Corded Oscillating Multi-Tool Kit. This versatile tool is designed for a wide range of applications including cutting, sawing, polishing, and dressing various materials. To ensure safe and efficient operation, please read this manual thoroughly before use and retain it for future reference.
Image 1.1: The WORKPRO Oscillating Multi-Tool Kit, including the main tool, various accessories, and a convenient carrying bag.
2. Bezpečnostní informace
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Always wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool.
3. Konec produktuview
Familiarize yourself with the main components of your WORKPRO Oscillating Multi-Tool:
- Quick-release lock: For fast and tool-less accessory changes.
- Vypínač ON/OFF: Pro zapnutí a vypnutí nářadí.
- Speed controller: Adjusts the oscillation speed.
- Sklíčidlo na nářadí: Where accessories are attached.
- Větrací otvory: Pro chlazení motoru.
- Comfortable rubber handle: Provides ergonomic grip and reduces vibration.
Image 3.1: Key components of the WORKPRO Oscillating Multi-Tool.
4. Nastavení
4.1. Attaching and Changing Accessories
The WORKPRO Oscillating Multi-Tool features a quick-lock system for easy and tool-less accessory changes. Follow these simple steps:
- Krok 1: Move the quick-release lock lever to the open position.
- Krok 2: Align the accessory (e.g., saw blade, sanding pad) with the tool chuck and slide it into place.
- Krok 3: Press the quick-release lock lever back to the closed position to secure the accessory. Ensure it is firmly locked before operation.
Image 4.1: The three-step process for safely and quickly changing accessories.
5. Návod k obsluze
5.1. Zapnutí/vypnutí
To activate the oscillating tool, simply press the ON/OFF switch located at the top of the tool. To turn it off, press the switch again.
5.2. Variable Speed Adjustment
The tool features 7 variable speed settings, allowing you to match the oscillation rate to the specific task and material. The speed controller is located on the tool body. Rotate the dial to select your desired speed, ranging from 15,000 RPM to 23,000 RPM.
Image 5.1: Adjusting the 7-speed dial for optimal performance.
Image 5.2: The tool operates within a speed range of 15,000 to 23,000 RPM with a 3° oscillation angle.
5.3. Aplikace
Tento multifunkční nástroj je vhodný pro řadu úkolů, včetně:
- Cutting wood, plastic, and soft metals.
- Sanding surfaces.
- Scraping materials like old caulk or adhesive.
- Removing grout.
Obrázek 5.3: Příkladamples of the multi-tool's diverse applications.
6. Údržba
Regular maintenance ensures the longevity and optimal performance of your tool. Always unplug the tool before performing any maintenance.
- Čištění: Keep the tool's air vents clean and free of debris to prevent overheating. Wipe the tool body with a soft, damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
- Péče o příslušenství: Inspect accessories before each use for wear or damage. Replace worn or dull blades and sanding sheets to maintain cutting efficiency and safety.
- Skladování: Store the tool and its accessories in the provided carrying bag in a dry, secure location, out of reach of children.
7. Řešení problémů
If you encounter issues with your WORKPRO Oscillating Multi-Tool, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nástroj se nespustí | No power supply; ON/OFF switch faulty | Zkontrolujte zásuvku a kabel; pokud je vypínač vadný, kontaktujte zákaznickou podporu. |
| Snížený výkon | Worn accessory; Overheating; Incorrect speed setting | Replace accessory; Allow tool to cool; Adjust speed controller. |
| Nadměrné vibrace/hluk | Příslušenství není správně zajištěno; Poškozené příslušenství | Ensure accessory is locked; Replace damaged accessory. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu WORKPRO.
8. Specifikace
| Funkce | Detail |
|---|---|
| Motor | 3.0 Amp |
| Úhel oscilace | 3° |
| Nastavení rychlosti | 7 variabilních rychlostí |
| Rychlost bez zatížení | 15,000 - 23,000 ot./min |
| Hmotnost | 5.16 libry |
| Číslo modelu | W124744AE |
| Výrobce | HANZGHOU GREATSTAR INDUSTRIAL CO.LTD |
9. Dodávané příslušenství
Your WORKPRO Oscillating Multi-Tool Kit comes with a comprehensive set of accessories to get you started:
- 2 pcs wood/metal blades
- 3 pcs wood and plastic saw blades
- 1 pc scraper
- 1 pc sanding pad
- 10 pcs sanding sheets
- 1 pc user manual (this document)
- 1 pc oscillating tool kit carrying bag
Image 9.1: A visual representation of the 17 included accessories.
10. Záruka a podpora
WORKPRO stands behind the quality of its products. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official WORKPRO website. Please have your model number (W124744AE) and purchase date ready when contacting support.