1. Úvod
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your Mytee S300-H Tempo Heated Spotter. Please read this manual thoroughly before operating the unit and retain it for future reference.
1.1 Bezpečnostní informace
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury. This includes:
- Před použitím si přečtěte všechny pokyny.
- Připojujte pouze do řádně uzemněné zásuvky.
- Neponořujte jednotku do vody.
- Nepracujte s poškozeným kabelem nebo zástrčkou.
- Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od jednotky.
- Use only recommended cleaning solutions.
2. Konec produktuview
The Mytee S300-H Tempo Heated Spotter is a compact and powerful heated carpet extractor designed for efficient spot cleaning and interior maintenance. Its features include:
- Powerful Vacuum Motor: Produces 85 inches of water lift for maximum extraction, reducing drying times with its two-staga design.
- Uživatelsky přívětivý design: Features one-switch operation and easy-to-open caps for solution and recovery tanks, enhancing convenience and safety.
- Odolná konstrukce: Built with Mytee’s robust roto-molded housing for long-lasting performance, and includes an Air Lite Upholstery Tool.
- Přenosný a kompaktní: With a 1-gallon tank capacity and weighing only 26 pounds, it is easy to transport and store.
2.1 Komponenty
Familiarize yourself with the main components of your S300-H Tempo Heated Spotter:
Obrázek 1: Plný view of the Mytee S300-H Tempo Heated Spotter, showing the main unit, vacuum hose, solution hose, and upholstery tool.
Obrázek 2: Strana view of the unit, highlighting the control panel with power switches and the quick-connect fitting for the solution hose.
Obrázek 3: Close-up of the easy-to-open cap for the solution tank, located on the top of the unit.
3. Nastavení
3.1 Počáteční montáž
- Vybalte všechny součásti z obalu.
- Ensure all hoses and the upholstery tool are present.
- Attach the vacuum hose to the vacuum port on the unit.
- Connect the solution hose to the quick-connect fitting on the unit and to the upholstery tool.
3.2 Plnění nádrže na roztok
- Open the solution tank cap (refer to Figure 3).
- Naplňte nádržku čistou vodou a doporučeným čisticím roztokem na koberce podle pokynů výrobce roztoku. Nepřeplňujte.
- Securely close the solution tank cap.
4. Návod k obsluze
4.1 Zapnutí
- Zapojte napájecí kabel do uzemněné elektrické zásuvky.
- Turn on the "Vacuum" switch.
- Turn on the "Pump" switch.
- If heated cleaning is desired, turn on the "Heater" switch. Allow a few minutes for the water to heat up.
4.2 Proces čištění
- Pre-test the cleaning solution on an inconspicuous area of the material to be cleaned for colorfastness.
- Position the upholstery tool over the area to be cleaned.
- Press the trigger on the upholstery tool to spray the cleaning solution onto the surface.
- While spraying, pull the tool slowly across the surface to extract the dirty solution. Overlap passes slightly.
- For heavily soiled areas, repeat the process. For best results, perform a final pass without spraying solution to maximize extraction of moisture.
- Monitor the recovery tank for dirty water.
Obrázek 4: The upholstery tool in action, demonstrating the cleaning process on a carpeted surface.
4.3 Vyprázdnění sběrné nádrže
- Turn off all switches and unplug the unit.
- Locate the recovery tank drain.
- Carefully drain the dirty water into a suitable receptacle.
- Rinse the recovery tank with clean water if necessary.
5. Údržba
5.1 Běžné čištění
- After each use, empty and rinse both the solution and recovery tanks thoroughly.
- Flush the solution lines by running clean water through the system.
- Clean the upholstery tool, removing any debris from the nozzle and extraction head.
- Otřete vnější část jednotky reklamouamp tkanina.
5.2 Skladování
Store the unit in a clean, dry place, away from extreme temperatures. Ensure all tanks are empty and hoses are properly coiled to prevent damage.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jednotka se nezapne. | Not plugged in; circuit breaker tripped; faulty power switch. | Check power connection; reset circuit breaker; contact service center. |
| No spray from upholstery tool. | Solution tank empty; pump switch off; clogged nozzle; kinked solution hose. | Refill solution tank; turn on pump switch; clean nozzle; straighten hose. |
| Nízké sání. | Recovery tank full; vacuum hose clogged or disconnected; vacuum motor issue. | Empty recovery tank; check hose connections and clear obstructions; contact service center. |
| Ohřívač nefunguje. | Heater switch off; electrical issue. | Turn on heater switch; ensure adequate power supply; contact service center. |
| Z jednotky vytéká voda. | Loose hose connection; damaged tank or seal; internal component issue. | Check all connections; inspect tanks and seals for damage; contact service center. |
For issues not listed or if solutions do not resolve the problem, please contact Mytee customer support.
7. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | S300-H |
| Výrobce | Mytee |
| Hmotnost položky | 26 libry |
| Rozměry balení | 24.25 x 22 x 10 palce |
| Kapacita nádrže | 1 Gallon (Solution & Recovery) |
| Vodní výtah | 85 palců |
| Vakuový motor | Dvou-stage |
| Barva | White (Unit housing is black and blue) |
| ASIN | B09GPR8VY3 |
8. Záruka a podpora
8.1 Informace o záruce
Mytee offers a limited lifetime warranty on the body of the S300-H Tempo Heated Spotter. Additionally, there is a one-year warranty covering the pump, vacuum motor, and heating system. Please retain your proof of purchase for warranty claims.
8.2 Zákaznická podpora
For technical assistance, warranty service, or to locate a service center, please visit the official Mytee website or contact their customer support directly. Mytee maintains a national network of authorized service centers to assist you.
