REBEL RB-0003 3-in-1 Detector User Manual
Model: RB-0003
1. Úvod
Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.
The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.
2. Bezpečnostní informace
- Always exercise caution when working near detected objects.
- Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
- Udržujte zařízení suché a čisté. Nevystavujte jej vlhkosti ani extrémním teplotám.
- Nepokoušejte se zařízení otevírat ani upravovat. Opravy by měl provádět pouze kvalifikovaný personál.
- Pokud zařízení nebudete delší dobu používat, vyjměte baterie.
3. Konec produktuview
Familiarize yourself with the components of your REBEL RB-0003 detector:
Obrázek 1: Přední strana view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.
Obrázek 2: Zadní view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.
- Displej: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
- Tlačítko VYBRAT: Used to switch between detection modes (Metal, Wood, AC Cable).
- Plocha senzoru: Located on the back of the device, this area must be flush against the surface for accurate readings.
- Přihrádka na baterie: Umístěno na zadní straně, pro instalaci baterie.
4. Nastavení
4.1. Instalace baterie
- Open the battery compartment cover on the back of the device (refer to Figure 2).
- Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
- Bezpečně zavřete kryt bateriového prostoru.
The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.
5. Návod k obsluze
5.1. Obecný provoz
- Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
- Stiskněte tlačítko VYBRAT button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
- Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
- Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.
5.2. Metal Detection
In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.
- Select the Metal detection mode.
- Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
- A distinct audio alert or visual indicator will confirm the presence of metal.
5.3. Detekce dřeva
The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.
- Switch to Wood detection mode.
- Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
- Mark the detected areas for reference.
5.4. AC Cable Detection
The RB-0003 is capable of detecting live AC 90-250V cables.
- Select the AC Cable detection mode.
- Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage je detekováno.
- Pozor: Always assume wires are live until confirmed otherwise by a qualified electrician.
6. Údržba
- Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Výměna baterie: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapne. | Vybité nebo nesprávně vložené baterie. | Zkontrolujte polaritu baterií nebo je vyměňte. |
| Nepřesné údaje. | Low battery, improper contact with surface, or environmental interference. | Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields. |
| No detection in AC mode. | Wires are not live, or too deep. | Ensure power is on to the circuit. Scan slowly and thoroughly. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | RB-0003 (MIE-RB-0003) |
| Značka | REBEL |
| Hloubka detekce kovů | Až 30 mm |
| Wood Detection Depth | Up to 18 mm (for 30x30 mm profiles) |
| AC Cable Detection | 90-250V |
| Velikost displeje | 51 x 25 mm |
| Indikátor slabé baterie | Ano |
| Zdroj napájení | Napájení z baterie |
| Rozměry produktu | 15.5 x 5.4 x 2.7 cm |
| Hmotnost položky | 157 gramů |
| Hodnocení mezinárodní ochrany | IP66 |
9. Záruka a podpora
REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webmísto.
For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webmísto.
