Zavedení
Thank you for choosing the Philips BA11 LED Dimmable Light Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.
These bulbs feature Warm Glow technology, which allows the color temperature to become warmer as the light is dimmed, creating a relaxing ambiance. They are designed for indoor use in various decorative fixtures.
Důležité bezpečnostní informace
- Nebezpečí úrazu elektrickým proudem: Always turn off power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Not for Emergency Lighting: These bulbs are not intended for use with emergency exits or emergency lighting.
- Vhodné pro Damp Umístění: These bulbs are rated for indoor use and suitable for damp locations, but not for direct exposure to water.
- Kompatibilita stmívače: Ensure your dimmer switch is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
- Uzavřené svítidla: These bulbs are suitable for use in enclosed fixtures.
- Provozní teplota: Do not use in environments where the operating temperature exceeds the bulb's specified range.
- Likvidace: Žárovky zlikvidujte v souladu s místními předpisy.
Obsah balení
Váš balíček by měl obsahovat následující položky:
- 3 x Philips BA11 LED Dimmable Light Bulbs

Image: Three Philips BA11 LED Dimmable Light Bulbs, showing their clear finish and candelabra base.
Nastavení a instalace
- Vypnout napájení: Before replacing any light bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box. This prevents electrical shock.
- Vyjměte starou žárovku: Opatrně vyšroubujte stávající žárovku z objímky. Pokud byla nedávno používána, nechte ji vychladnout.
- Zkontrolujte příslušenství: Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Instalace nové žárovky: Gently screw the Philips BA11 LED Dimmable Light Bulb into the E12 candelabra base socket. Do not overtighten.
- Obnovit napájení: Jakmile je žárovka bezpečně nainstalována, obnovte napájení svítidla pomocí jističe nebo pojistkové skříně.
- Test: Zapněte vypínač, abyste se ujistili, že žárovka funguje správně.
Poznámka: These bulbs are designed for E12 candelabra bases. Attempting to install them in incompatible sockets may cause damage or malfunction.
Návod k obsluze
Zapnutí/vypnutí
Operate the light bulb using your standard wall switch. The bulb will illuminate instantly when power is supplied.
Dimming Functionality and Warm Glow Effect
These Philips LED bulbs are fully dimmable. When used with a compatible LED dimmer switch, you can adjust the brightness level to your preference.
- Warm Glow Effect: As you dim the light, the bulb's color temperature will gradually shift from a bright soft white (2700K) to a warmer, more amber tone. This mimics the behavior of traditional incandescent bulbs, creating a cozy and relaxing atmosphere.
- Optimal Dimming: For best performance and to fully experience the Warm Glow effect, use a dimmer switch specifically designed for LED lighting.
Údržba
- Čištění: Před čištěním se ujistěte, že je žárovka vypnutá a že je chladná. Otřete žárovku měkkým, suchým hadříkem. Nepoužívejte tekuté ani abrazivní čisticí prostředky.
- Nahrazení: These LED bulbs have a long lifespan. When replacement is eventually needed, follow the same installation steps outlined in the "Setup and Installation" section.
- Skladování: Pokud skladujete cibule, uchovávejte je v originálním obalu na chladném a suchém místě.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žárovka nesvítí. |
|
|
| Žárovka bliká nebo hučí. |
|
|
| Dimming range is poor or inconsistent. |
|
|
Specifikace
| Značka | Philips |
| Číslo modelu | 556506 |
| Typ světla | LED |
| Speciální funkce | Dimmable, Warm Glow Effect |
| Wattage (skutečná hodnota) | 6.6 wattů |
| Žárovkový ekvivalent | 75 wattů |
| Velikost tvaru žárovky | BA11 |
| Základna žárovky | E12 (Svícen) |
| Jas | 600 XNUMX lumenů |
| Světlá barva | Měkká bílá |
| Teplota barev | 2700 Kelvin (warms when dimmed) |
| svtage | 120 Volts (100-120V, 60Hz) |
| Vnitřní/venkovní použití | Krytý |
| Materiál | Měď (vnitřní součásti) |
| Rozměry produktu | 1.57 x 1.38 x 4.33 palce |
| Hmotnost položky | 3.52 unce |
| UPC | 046677556501 |
Záruka a podpora
For information regarding warranty coverage, technical support, or customer service, please refer to the official Philips website or contact Philips customer support directly. Details can typically be found on the product packaging or the manufacturer's official online resources.
Poznámka: Warranty terms and conditions may vary by region and retailer.