1. Úvod
Thank you for choosing the LEXMAN LED Filament Globe Bulb. This bulb combines a vintage design with modern LED technology, offering energy efficiency and a long lifespan. It provides a powerful 1055 lumens of neutral white light (4000K), equivalent to a 75W incandescent bulb, while consuming only 7.8W. This manual provides important information for the safe and proper installation, operation, and maintenance of your new LED bulb.
2. Důležité bezpečnostní informace
- Před instalací si přečtěte všechny pokyny.
- Nebezpečí úrazu elektrickým proudem: Always disconnect power at the fuse box or circuit breaker before installing or replacing the bulb.
- Ensure the bulb is suitable for the fixture and socket type (E27).
- Do not use with dimmers unless explicitly stated on the product packaging or bulb itself. This bulb is not specified as dimmable.
- Žárovku nerozebírejte ani neupravujte.
- Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
- Nedotýkejte se žárovky mokrýma rukama.
- Tato žárovka je určena pro použití v suchých vnitřních prostorách.
3. Nastavení a instalace
Follow these steps to install your LEXMAN LED Filament Globe Bulb:
- Vypnout napájení: Before attempting any installation, ensure the power supply to the light fixture is completely turned off at the main circuit breaker or fuse box.
- Allow existing bulb to cool: If replacing an old bulb, allow it to cool down completely before touching it.
- Vyjměte starou žárovku: Carefully unscrew the old bulb from the socket by turning it counter-clockwise.
- Zkontrolujte zásuvku: Check the light fixture's socket for any damage or corrosion. Ensure it is clean and dry.
- Nainstalujte novou žárovku: Gently screw the LEXMAN LED Filament Globe Bulb into the E27 socket by turning it clockwise until it is snug. Do not overtighten.
- Obnovení napájení: Once the bulb is securely installed, restore power to the light fixture at the circuit breaker or fuse box.
- Test: Zapněte vypínač, abyste se ujistili, že žárovka funguje správně.
Obrázek 3.1: Dimensions of the LEXMAN LED Globe Bulb. The bulb has a diameter of 95mm and a total height of 140mm, suitable for E27 sockets.
Obrázek 3.2: Přední view of the LEXMAN LED Filament Globe Bulb highlighting its key specifications: 4000K neutral white light, E27 base, 1055 lumens output, 7.8W power consumption (equivalent to 75W incandescent), and an instant-on feature (95% intensity in less than 0.5 seconds).
4. Návod k obsluze
Operating your LEXMAN LED Filament Globe Bulb is straightforward:
- Once installed in a compatible E27 fixture and power is restored, simply use the wall switch or fixture switch to turn the light on or off.
- The bulb provides instant full brightness (95% intensity in less than 0.5 seconds) with its 4000K neutral white light, offering optimal visual comfort.
Obrázek 4.1: The LEXMAN LED Globe Bulb providing neutral white illumination in a living room setting, demonstrating its application in a floor lamp.
Obrázek 4.2: Visual representation of various light temperatures. The top-left quadrant, marked with a check, illustrates the 4000K neutral white light output of this LEXMAN bulb, which is dynamic and close to daylight.
5. Údržba
The LEXMAN LED Filament Globe Bulb requires minimal maintenance:
- Čištění: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as they may damage the bulb.
- Skladování: If storing the bulb, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
6. Řešení problémů
If your LEXMAN LED Filament Globe Bulb is not functioning as expected, try the following:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žárovka nesvítí. | Zařízení není napájeno. | Zkontrolujte jistič nebo pojistku. Ujistěte se, že je vypínač světla zapnutý. |
| Žárovka není správně zašroubovaná. | Turn off power, then carefully re-screw the bulb into the socket until snug. | |
| Vadná žárovka nebo svítidlo. | Test the bulb in another working fixture. If it still doesn't light, the bulb may be faulty. If other bulbs work in the fixture, the fixture may be faulty. | |
| Žárovka bliká. | Nekompatibilní stmívač. | This bulb is not designed for dimming. Remove the dimmer switch or replace it with a standard switch. |
| Uvolněné spojení. | Turn off power, then carefully re-screw the bulb into the socket. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | LEXMAN |
| Číslo modelu | 3276007280630 |
| Výrobce | ADEO |
| Rozměry produktu (D x Š x V) | 10 x 9.5 x 14 cm |
| Hmotnost položky | 110 gramů |
| Množství | 1 |
| Světlá barva | Neutrální bílá (4000K) |
| Tvar | Globe (G95) |
| svtage | 240 voltů |
| Typ uzávěru | E27 |
| Světelný tok | 1055 XNUMX lumenů |
| LED Wattage | 7.8 wattů |
| Žárovkový ekvivalent | 75 wattů |
| Průměrná životnost | 15,000 hodin |
| Okamžité zapnutí | 95% intensity in <0.5 seconds |
| Stmívatelné | No (not specified as dimmable) |
| Jsou vyžadovány baterie | Žádný |
Obrázek 7.1: Product packaging for the LEXMAN LED Filament Globe Bulb, displaying specifications such as 4000K, E27, 1055 lumens, 7.8W (75W equivalent), 15,000 hours lifespan, and a 5-year warranty.
8. Záruka a podpora
Záruka: This LEXMAN LED Filament Globe Bulb comes with a 5-letá záruka, ensuring its quality and durability. The average lifespan of the bulb is rated at 15,000 hours, which translates to over 13 years of use based on approximately 3 hours per day.
Zákaznická podpora: For technical assistance, warranty claims, or any questions regarding your LEXMAN product, please refer to the contact information provided on your purchase receipt or the official LEXMAN webweb. Před kontaktováním podpory si prosím připravte číslo modelu (3276007280630) a doklad o koupi.
