Prozkoumejte uživatelskou příručku k budíku s předním zrcadlem Scientific RDC2002.

Zavedení

Thank you for choosing the Explore Scientific RDC2002 Mirror Front Alarm Clock. This device combines a stylish design with practical features, including time display, internal temperature, weather forecast icons, dual alarms, and a convenient USB charging port. This manual provides detailed instructions to help you set up and operate your new alarm clock effectively.

Obsah balení

• Explore Scientific RDC2002 Alarm Clock
• Napájecí adaptér
• Uživatelská příručka

Nastavení

1. Připojení napájení

The RDC2002 alarm clock operates using the included power adapter. It does not require batteries for primary operation, but it does have a compartment for backup batteries to preserve settings during power outages.

1. Connect the power adapter cable to the DC 5V input port on the back of the alarm clock.
2. Zapojte napájecí adaptér do standardní zásuvky.
3. Displej se rozsvítí, což znamená, že je zařízení zapnuté.

Obraz: The included power adapter for the alarm clock.

2. Installing Backup Batteries (Optional)

While not required for operation, installing 3x AAA batteries (not included) in the battery compartment will save your time and alarm settings in case of a power interruption.

1. Vyhledejte kryt přihrádky na baterie na zadní straně jednotky.
2. Odstraňte kryt.
3. Insert 3x AAA batteries, observing the correct polarity (+/-).
4. Nasaďte kryt prostoru pro baterie.

Obraz: Zadní view of the alarm clock, highlighting the power input, USB port, and battery compartment.

3. Počáteční nastavení času a data

Upon first power-up, you may need to set the current time and date. Refer to the 'Operating' section for detailed instructions on setting the time and date.

Návod k obsluze

The RDC2002 features intuitive soft-touch controls located on the top surface of the unit. The display shows time, internal temperature, and weather forecast icons.

Obraz: The alarm clock display showing time and weather forecast icons.

1. Nastavení času

1. Stiskněte a podržte SOUBOR button (usually represented by a gear icon or 'M') on the top panel until the hour digits begin to flash.
2. Použijte + a - tlačítka pro nastavení hodiny.
3. Stiskněte SOUBOR again to move to minute adjustment. Use + a - upravit minuty.
4. Pokračujte v stisknutí SOUBOR to cycle through other settings like 12/24-hour format, year, month, and day, adjusting each with + a -.
5. Stiskněte SOUBOR one last time or wait a few seconds for the settings to save automatically.

2. Nastavení alarmů (Alarm 1 a Alarm 2)

The RDC2002 supports two independent alarms.

1. Stiskněte tlačítko POPLACH 1 button (often an alarm clock icon with '1') to display the current Alarm 1 time.
2. Stiskněte a podržte POPLACH 1 tlačítko, dokud nezačnou blikat číslice hodin.
3. Použijte + a - tlačítky nastavte požadovanou hodinu buzení.
4. Stiskněte POPLACH 1 again to set the minutes, adjusting with + a -.
5. Stiskněte POPLACH 1 again to activate/deactivate the alarm. An alarm icon will appear on the display when active.
6. Opakujte postup pro POPLACH 2 using its dedicated button (alarm clock icon with '2').

3. Funkce odložení buzení

When an alarm sounds, touch the SNOOZE / SVĚTLO button (often 'Zz' or a light bulb icon) on the top panel to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.

4. Nastavení jasu displeje

The display features 3 brightness levels. A small slider switch is located on the side of the unit to adjust the intensity of the LED display.

• Slide the switch to select your preferred brightness level (Low, Medium, High) to suit ambient light conditions.

Obraz: The alarm clock highlighting soft-touch controls, USB port, and the brightness slider.

5. Internal Temperature and Weather Forecast

The clock automatically displays the internal temperature and provides weather forecast icons based on internal atmospheric pressure changes.

Obraz: The alarm clock display showing the internal temperature.

• The weather icons (sunny, cloudy, rainy) are predictive and based on internal sensor readings, not external weather services.
• The display cycles between time and temperature automatically, or you can manually switch by pressing a dedicated button (if available, check specific icons on your unit).

6. USB nabíjecí port

A USB port (DC 5V) is located on the back of the unit, allowing you to charge compatible smart devices.

• Connect your device's USB charging cable to the USB port on the alarm clock.
• Ensure the alarm clock is powered on for the USB charging function to work.

Údržba

Čištění

• Otřete jednotku měkkým, suchým hadříkem.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the surface or electronic components.
• Zabraňte vniknutí vlhkosti do jakýchkoli otvorů.

Obecná péče

• Place the alarm clock on a stable, flat surface.
• Vyhněte se přímému slunečnímu záření, extrémním teplotám a vysoké vlhkosti.
• Uchovávejte mimo dosah silných magnetických polí.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Explore Scientific webwebu. Uschovejte si účtenku jako doklad o koupi.