Kohree HY1733

Uživatelská příručka k vodnímu čerpadlu Kohree pro obytné vozy 3.5 GPM 55 PSI

Model: HY1733

1. Důležité bezpečnostní informace

Please read and understand all safety instructions before installing or operating this pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • Elektrická bezpečnost: Ensure the power supply is disconnected before performing any installation or maintenance. Connect the pump only to a 12V DC power source. Use appropriate fuse protection as specified (15-18 amp doporučeno).
  • Bezpečnost vody: This pump is designed for fresh water only. Do not use with flammable liquids, corrosive chemicals, or water above 110°F (43°C).
  • Instalace: Mount the pump in a dry, well-ventilated area. Ensure all connections are secure and leak-free.
  • Operace: Do not run the pump dry for extended periods. The pump features built-in thermal overload protection to prevent motor damage.

2. Konec produktuview

The Kohree 12V DC Fresh Water Pump (Model HY1733) is a self-priming diaphragm pump designed for reliable water transfer in various applications. It delivers a flow rate of 3.5 gallons per minute (GPM) with a pressure switch set to 55 PSI, making it suitable for RVs, campers, marine vessels, yachts, and garden irrigation systems.

Kohree RV Water Pump with included accessories

Image: The Kohree RV Water Pump shown with various included accessories, such as hose barb fittings, a water strainer, and Teflon tape.

Klíčové vlastnosti:

  • High Flow & Pressure: 3.5 GPM flow rate and 55 PSI pressure for efficient water delivery.
  • Samonasávání: Primes up to 3 meters (approximately 10 feet), simplifying initial setup.
  • Run Dry Protection: Can run dry for short periods without damage, preventing motor burnout.
  • Ochrana proti tepelnému přetížení: Automatically shuts off the motor if it overheats, ensuring safety and longevity.
  • Provoz s nízkou hlučností: Engineered for reduced operational noise.
  • Odolná konstrukce: Features an iron base for stability and quality materials for reliability.
Diagram illustrating low noise level of the pump

Image: A diagram illustrating the pump's low noise level, comparing it to common sounds like whispering and a car refrigerator.

3. Specifikace

SpecifikaceHodnota
Číslo modeluHY1733
svtage12 V DC
Maximální průtok3.5 galonů za minutu (GPM)
Nastavení tlakového spínače55 PSI
Maximální výška zdvihu124 stop
Aktuální losování7.0 Amps (Max)
Doporučená pojistka15-18 Amps
MateriálCopper, Nylon/Polypropylene
Rozměry produktu (D x Š x V)10.98 cm x 5.63 cm x 5.08 cm
Hmotnost položky10.2 unce (cca 290 gramů)
Basic parameters of the Kohree water pump: 12V, 3.5GPM, 124FT lift

Image: Visual representation of the pump's basic parameters: 12V operating voltage, 3.5 GPM flow rate, and 124 feet maximum lift.

Product dimensions of the Kohree water pump

Image: Detailed product dimensions of the Kohree water pump, including overall length, width, and height, and inlet/outlet sizes.

Components and materials of the Kohree water pump

Image: An illustration detailing the quality materials used in the pump's construction, such as Nylon/Polypropylene shell, EPDM/Viton sealing, copper motor, and anti-vibration rubber pump bracket.

4. Instalace

Proper installation is crucial for optimal performance and longevity of your water pump.

4.1 Kontroly před instalací

  • Ensure the mounting surface is solid and stable.
  • Verify that the power source is 12V DC and can supply the required amperage (7.0 Amps).
  • Confirm you have all necessary plumbing fittings and hoses.

4.2 Montáž čerpadla

Mount the pump in a location that is easily accessible for maintenance, protected from freezing temperatures, and as close as possible to the water source. Use the integrated mounting feet to secure the pump to a flat surface.

4.3 Vodovodní připojení

  1. Vstupní připojení: Connect the water supply line (from the freshwater tank) to the pump's inlet port. It is recommended to install a water strainer/filter on the inlet side to prevent debris from entering the pump.
  2. Výstupní připojení: Connect the discharge line (to the RV/marine plumbing system) to the pump's outlet port.
  3. Kování: Use the provided hose barb fittings for secure connections. Apply Teflon tape to threaded connections to ensure a watertight seal and prevent leaks.
Diagram of a water pump installation in a yacht

Image: A schematic diagram illustrating a typical water pump installation in a yacht, showing connections to the freshwater tank, filter, accumulator tank, water heater, faucet, and shower.

Diagram of a water pump installation in an RV

Image: A schematic diagram illustrating a typical water pump installation within an RV's water system, connecting to various fixtures like sinks, toilets, and showers.

Hose barb fittings for water pump connections

Obrázek: Detail view of the hose barb fittings provided for connecting water lines to the pump.

Teflon tape for sealing pipe threads

Image: A roll of Teflon tape, used for sealing threaded pipe connections to prevent leaks.

4.4 Elektrické připojení

  1. Connect the positive (+) wire from the pump to the positive terminal of your 12V DC power source, ensuring an in-line fuse (15-18 amp) je nainstalován.
  2. Connect the negative (-) wire from the pump to the negative terminal of your 12V DC power source.
  3. Ujistěte se, že všechna elektrická připojení jsou bezpečná a chráněna před vlhkostí.

5. Provoz

Once installed, operating the Kohree water pump is straightforward.

  1. Základní nátěr: Ensure the freshwater tank has water. Open a faucet in your system to allow air to escape. Turn on the pump's power. The pump will self-prime, drawing water and expelling air until a steady flow is achieved. Close the faucet once water flows consistently.
  2. Automatický provoz: The pump features a built-in pressure switch. When a faucet is opened, the pressure drops, and the pump automatically turns on. When the faucet is closed, the pressure builds up, and the pump automatically turns off.
  3. Run Dry Protection: The pump is designed to run dry for a short period without damage. However, it is best practice to ensure a water supply is always available to prevent unnecessary wear.
Comparison of water flow before and after using the pump

Image: A visual comparison showing low water flow before the pump and significantly improved, high water flow after the pump is activated, demonstrating its effectiveness.

6. Údržba

Pravidelná údržba pomáhá zajistit dlouhou životnost a efektivní provoz vašeho čerpadla.

6.1 Cleaning the Water Strainer

The inlet water strainer should be inspected and cleaned periodically, especially if you notice reduced water flow. To clean:

  1. Odpojte napájení čerpadla.
  2. Unscrew the clear housing of the strainer.
  3. Remove the mesh filter and rinse it thoroughly under clean water.
  4. Reassemble the strainer, ensuring a tight seal.
Components of the water strainer for cleaning

Obrázek: Rozložený view of the water strainer, showing its main body, mesh filter, and clear housing, indicating how to disassemble for cleaning.

6.2 Pressure Switch Adjustment

The pressure switch is factory-set to 55 PSI. If minor adjustments are needed, consult a qualified technician. Improper adjustment can lead to pump malfunction or damage.

Pressure switch adjustment screw on the pump

Obrázek: Detailní záběr view of the pressure switch on the pump, highlighting the adjustment screw for fine-tuning pressure settings.

6.3 Zazimování

In freezing conditions, the pump and plumbing system must be winterized to prevent damage. This typically involves draining all water from the system or flushing with RV-specific antifreeze. Refer to your RV or marine vessel's specific winterization guidelines.

7. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat u svého vodního čerpadla.

ProblémMožná příčinaŘešení
Čerpadlo neběžíNo power, blown fuse, loose wiringCheck power supply, replace fuse, tighten connections.
No water flow / Low flowNo water in tank, clogged strainer, air in system, kinked hoseFill tank, clean strainer, prime pump, check hoses.
Čerpadlo běží nepřetržitěLeak in system, faulty pressure switch, air in systemCheck for leaks, inspect pressure switch, re-prime system.
Pump cycles on and off rapidlySmall leak, restricted flow, low voltageCheck for minor leaks, ensure clear flow path, verify voltage.

8. Záruka a zákaznická podpora

The Kohree 12V water pump is certified to CE standards and comes with a one-year warranty. If you experience any quality issues or are not satisfied with your purchase, please contact Kohree customer service for assistance.

For customer support, please refer to the contact information provided with your purchase or visit the official Kohree webmísto.

9. Video zdroje

No official product videos from the seller were available for embedding based on the provided data. Please refer to the manufacturer's webwebu nebo stránky produktu s dostupnými video zdroji.

Související dokumenty - HY1733

Předview Uživatelská příručka k autochladničce KOHREE: Funkce, obsluha a řešení problémů
Komplexní uživatelská příručka pro autochladničku KOHREE s kompresorem. Seznamte se s jejími funkcemi, instalací, provozem, nastavením teploty, ochranou baterie, řešením problémů a informacemi o záruce.
Předview Uživatelská příručka k autochladničce KOHREE
Komplexní uživatelská příručka k autochladničce KOHREE s podrobným popisem jejích funkcí, obsluhy, instalace, řešení problémů a informací o záruce. Vhodná pro nákladní automobily, obytné vozy a další.ampa použití v domácnosti.
Předview Uživatelská příručka k zámku dveří pro obytné vozy KOHREE HY1234 - Průvodce instalací a obsluhou
Komplexní uživatelská příručka pro zámek dveří KOHREE HY1234 pro obytné vozy. Zahrnuje podrobný návod k instalaci, programování klávesnice, nastavení aplikace, základní operace a informace o shodě s předpisy FCC.
Předview Uživatelská příručka a technické specifikace pro nivelaci obytných vozů KOHREE HY1704
Tento dokument obsahuje pokyny a technické podrobnosti pro nivelační přístroj KOHREE HY1704 pro obytné vozy, včetně informací o nastavení, použití a shodě s předpisy FCC.
Předview Návod k instalaci a manuál pro LED světelný pásek pro markýzy KOHREE pro obytné vozy (model HY0682)
Komplexní návod k instalaci a provozu 20metrového LED světelného pásku KOHREE pro markýzy do obytných vozů (model HY0682). Seznamte se s obsahem balení, montáží, řezáním, připojením k napájení a ovládáním pomocí mobilní aplikace. Zahrnuje tipy pro řešení problémů a informace o shodě s předpisy FCC.
Předview Uživatelská příručka k autochladničce KOHREE: Funkce, obsluha a průvodce odstraňováním problémů
Prostudujte si uživatelskou příručku k autochladničce KOHREE, kde najdete podrobné informace o jejích funkcích, provozu, bezpečnostních pokynech, tipech pro řešení problémů a záruce. Naučte se, jak efektivně používat přenosnou dvouzónovou chladničku na cestách i doma.