Zavedení
Thank you for choosing the Lepro Solar Motion Sensor Light. This manual provides essential information for the safe and efficient use of your new solar light. Please read it thoroughly before installation and retain it for future reference.
This product features a separated solar panel and light body, connected by a 4.8-meter extension cable, allowing flexible placement. It is designed for outdoor use, offering 1000 lumens of ultra-bright, 3-sided illumination with a 360-degree adjustable angle. The light is IP65 waterproof and equipped with a motion sensor for automatic activation.
Obsah balení
- 2x světlo s pohybovým senzorem
- Držák pro montáž na zeď x 2
- Šrouby x 8
- Zástrčka na zeď x 8
- Návod k použití x 1
Image: Package contents showing two light units, mounting hardware, and the instruction manual.
Pokyny pro nastavení
- Vyberte umístění: Select a location for the solar panel where it can receive 6-8 hours of direct sunlight daily for optimal charging. The light unit can be placed up to 4.8 meters away from the solar panel thanks to the extension cable.
- Namontujte držák: Use the provided screws and wall plugs to securely attach the wall mount holder to your desired surface.
- Připojení světelné jednotky: Slide the solar light unit onto the mounted holder until it clicks into place.
- Připojte kabel: Insert the cable from the solar panel into the light unit's port. Ensure a firm connection.
- Aktivujte světlo: Locate the ON/OFF button on the back of the light unit. Press it to turn the unit ON. The light will only activate in dark environments when motion is detected.
Image: Detail of the light unit sliding into the mounting bracket.
Image: Step-by-step installation guide for the solar light.
Návod k obsluze
Funkce pohybového senzoru
The Lepro Solar Motion Sensor Light is designed to operate automatically. Once activated (ON position), it will:
- Charge during the day using solar energy.
- Remain off during daylight hours.
- Automatically turn on for approximately 20 seconds when motion (human or vehicle) is detected in a dark environment.
- Automatically turn off after 20 seconds if no further motion is detected.
The motion sensor has a detection range of up to 8 meters and a 120-degree angle. The light's two side panels can be rotated 360 degrees, allowing you to adjust the illumination direction and coverage area.
Image: Motion detection range and activation at night.
Image: Automatic charging during the day and 20-second illumination at night.
Nastavení světelných panelů
The two side light panels can be manually rotated 360 degrees to direct light precisely where needed, providing a wide 270-degree illumination angle.
Image: Adjustable light panels and separated solar panel design.
Údržba
Čištění
To ensure optimal performance, periodically clean the solar panel and light surface. Dust, dirt, or debris can reduce charging efficiency and light output. Use a soft, damp cloth to wipe the surfaces gently. Avoid abrasive cleaners or harsh chemicals.
Odolnost vůči povětrnostním vlivům
The Lepro Solar Motion Sensor Light is designed with an IP65 waterproof rating and constructed from durable ABS material, making it resistant to heat and freezing temperatures. It can safely operate in various weather conditions, including heavy rain, snow, and extreme temperatures.
Image: IP65 waterproof and weather-resistant features.
Odstraňování problémů
- Světlo se v noci nerozsvítí:
- Ensure the ON/OFF button on the back of the unit is pressed to the ON position.
- Verify the solar panel is receiving 6-8 hours of direct sunlight daily. Partial charging may occur on cloudy days, but full charge requires direct sun.
- Check if there are other strong light sources nearby. The motion sensor light is designed to activate only in dark environments.
- The internal battery might be depleted. Allow several days of full sunlight charging.
- Světlo svítí trvale nebo bliká:
- Ujistěte se, že v dosahu detekce senzoru není žádný nepřetržitý pohyb.
- Check for any obstructions or reflective surfaces that might be triggering the sensor.
- Světelný výstup je slabý:
- Clean the solar panel and light surface to remove any dirt or debris that may be hindering performance.
- Ujistěte se, že solární panel je umístěn tak, aby byl maximálně vystaven slunečnímu záření.
- The battery may not be fully charged. Allow more time for charging in direct sunlight.
Specifikace produktu
| Značka | Lepro |
| Název modelu | PR640004-DW-JP-2 |
| Barva | Černý |
| Materiál | ABS+GPPS (Acrylonitrile Butadiene Styrene) |
| Forma svítidla | Zeď |
| Rozměry produktu | 11.1 cm D x 5.87 cm Š x 4.65 cm V |
| Vnitřní/venkovní použití | Venkovní |
| Zdroj napájení | Solární napájení |
| Speciální funkce | 3-sided luminescence, 1000 lumens ultra-bright, 4.8 m cable separated type, 360° angle adjustment, IP65 waterproof |
| Kontrolní metoda | Stiskněte tlačítko |
| Typ světelného zdroje | LED |
| Světlá barva | Denní světlo (6,500 K) |
| svtage | 3.7 voltů |
| Wattage | 14 wattů |
| Hmotnost položky | 1.1 libry (500 gramů) |
| Baterie | Vyžaduje 1 lithium-iontovou baterii (součástí balení) |
| Úroveň odolnosti proti vodě | Vodotěsný (IP65) |
| Jas | 1000 XNUMX lumenů |
Záruka a podpora
For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Lepro website. Optional protection plans may be available for purchase from third-party providers.
For customer support, technical assistance, or to view the latest user manual PDF data, please visit the Obchod Lepro na Amazonu or contact Lepro customer service directly.
