PENMAMA Window Locks Instruction Manual

1. Úvod

Thank you for choosing PENMAMA Window Locks. This manual provides essential information for the safe and effective installation and use of your new window locks. Designed for vertical and horizontal sliding windows, these locks enhance security and child safety without requiring permanent modifications.

2. Vlastnosti produktu

• Odolná hliníková konstrukce: Made from heavy-duty extruded aluminum alloy for long-lasting performance.
• Rubber Cushioning: Features soft rubber padding inside to prevent scratches and enhance grip on window frames.
• Instalace bez nářadí: Clamps securely to window tracks using dual screws and an included hex key, requiring no drilling.
• Adjustable Security: Allows for full window closure or limited opening for ventilation while maintaining security.
• Zvýšená bezpečnost: Ideal for preventing accidental openings by children or pets, and deterring intruders.
• Visible Key Handle: Bright yellow key handles are easy to locate and use.

3. Obsah balení

• 4 x PENMAMA Window Locks (with built-in rubber pads)
• 4 x Yellow Hex Keys

Obrázek 1: Obsah a rozměry balení

4. Kompatibilita

PENMAMA Window Locks are designed for:

• Vertical sliding windows
• Horizontal sliding windows
• Sliding doors with flat tracks

Důležité: Not compatible with tracks over 0.67 inches (17mm) thick. Please measure your window or door track before purchase to ensure proper fit.

5. Bezpečnostní informace

• Always ensure the locks are securely tightened to prevent accidental opening.
• Keep hex keys out of reach of children to maintain child safety features.
• Regularly check the tightness of the screws to ensure continued security.
• These locks are a deterrent and should be used in conjunction with other home security measures.

Figure 2: Enhancing Home Safety and Child Protection

6. Nastavení a instalace

Installation of the PENMAMA Window Locks is tool-free and straightforward. Follow these steps:

1. Příprava zámku: The lock comes with a removable rubber lining. Ensure it is properly seated inside the U-shaped channel of the lock to protect your window frame.
2. Umístění zámku: Place the lock onto the window track at your desired position. This can be to fully secure the window when closed, or to limit its opening for ventilation.
3. Utáhněte šrouby: Insert the yellow hex key into the screws on the side of the lock. Turn clockwise to tighten the screws firmly against the window track. Ensure both screws are tightened evenly for maximum security.
4. Ověření zabezpečení: After tightening, attempt to move the window. The lock should prevent any movement beyond the set position.

Obrázek 3: Jednoduché kroky instalace

Ukázkové video instalace

Video 1: Visual guide demonstrating the installation of the PENMAMA Window Lock on a sliding window.

Detailed Installation and Security Review

Video 2: Komplexní review including installation steps and a demonstration of the lock's security features.

7. Provoz

To operate the PENMAMA Window Lock:

• Zamknout: Position the window as desired (fully closed or partially open for ventilation). Place the lock on the track and use the hex key to tighten the two screws until the lock is firmly secured and the window cannot move.
• To Unlock/Adjust: Insert the hex key into the screws and turn counter-clockwise to loosen them. Once loosened, the lock can be removed or repositioned along the track.

Figure 4: Securing the Window Lock

8. Údržba

• Clean the locks periodically with a soft, damp hadříkem k odstranění prachu a nečistot. Nepoužívejte abrazivní čisticí prostředky.
• Inspect the rubber cushioning for wear or damage. Replace if necessary to maintain optimal grip and frame protection.
• Ensure the screws are free from debris to allow for smooth tightening and loosening.

9. Řešení problémů

• Lock does not fit the track: Verify that your window or door track thickness is within the compatible range (under 0.67 inches). The lock is not suitable for wider tracks.
• Lock slides on the track: Ensure both screws are fully and evenly tightened. The rubber cushioning should provide sufficient friction. If the track is unusually smooth, consider adding a thin, non-slip material (not included) between the lock and the track, ensuring it does not interfere with window operation.
• Screws are difficult to turn: Check for any debris in the screw threads. Apply a small amount of silicone lubricant if necessary.

10. Specifikace

11. Záruka a podpora

For any questions, concerns, or support regarding your PENMAMA Window Locks, please contact the manufacturer directly through your purchase platform or the official PENMAMA webstránky. Uschovejte si prosím doklad o koupi pro případné reklamace.