Scheppach TIGER5000S Wet Grinding System with Homekit

Zavedení

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach TIGER5000S Wet Grinding System with Homekit. Please read this manual thoroughly before initial use to ensure proper handling and to achieve optimal sharpening results.

Nastavení

1. Vybalení a kontrola součástí

Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené. Balení by mělo obsahovat:

• Scheppach TIGER5000S Wet Grinding System unit
• Corundum grinding stone (200mm diameter)
• Kožené honovací kolečko
• Leštící pasta
• Úhlový měřič
• Universal device 70
• Homekit (sharpening devices 40 and 60)

Image: The Scheppach TIGER5000S Wet Grinding System shown with its main unit, grinding stone, leather wheel, and various sharpening accessories including the angle gauge, polishing paste, and universal device.

2. Naplnění vodní nádrže

The TIGER5000S features a large, unbreakable water tank essential for cooling the grinding stone and preventing overheating of the workpiece. Fill the tank with clean water before operation. Ensure the water level is sufficient to keep the grinding stone wet during use.

Image: A hand pouring water into the integrated water tank of the grinding system, demonstrating the cooling mechanism for the grinding stone.

3. Připojení napájení

Connect the power cable to a standard 230 Volt AC outlet. Ensure the power switch is in the 'off' position before plugging in the unit.

Návod k obsluze

1. Obecný provoz

The Scheppach TIGER5000S is equipped with a powerful 150W induction motor, driving a 200mm diameter corundum grinding stone (220 grit) and a 200x30mm leather honing wheel at a speed of 115 revolutions per minute. This combination ensures precise and efficient sharpening.

2. Using the Angle Gauge

The included angle gauge is crucial for setting the correct sharpening angle for your tools. Proper angle setting ensures optimal sharpness and extends tool life. Place the tool in the appropriate sharpening device and use the angle gauge to verify the angle against the grinding stone.

Image: A user demonstrating how to use the angle gauge to quickly and accurately set the required sharpening angle for a tool on the grinding system.

3. Sharpening with Universal Device 70 and Homekit

The universal device 70 is suitable for sharpening many straight standard tools. The Homekit includes specific sharpening devices (40 and 60) designed for various stone sharpening applications. Secure your tool firmly in the chosen device before grinding.

Image: The universal device attached to the grinding system, ready for sharpening various straight tools.

4. Honing with the Leather Wheel and Polishing Paste

After grinding, use the removable leather honing wheel to remove any burrs and achieve a perfectly polished edge. Apply a small amount of the included polishing paste to the leather wheel for best results. This step refines the edge and enhances sharpness.

Image: A user applying polishing paste to the leather honing wheel, which is used for polishing the workpiece after grinding.

Image: The leather wheel effectively removes burrs, ensuring a perfect sharpness for the tool.

5. Aplikace Přamples

The Scheppach TIGER5000S is versatile and suitable for sharpening a wide range of tools, including:

• Woodturning tools
• Nůžky
• Axes (up to 170 mm head length)
• Knives (with blade lengths from 40 mm to 100 mm)

Obrázek: Přamples of applications for the grinding system, including woodturning tools, scissors, axes, and knives.

Image: The system can sharpen axes with a head length of up to 170 mm.

Image: Suitable for knives with a blade length ranging from 40 mm to 100 mm.

Údržba

1. Čištění

Regularly clean the machine after use. Wipe down the exterior with a damp cloth. Ensure no grinding residue accumulates in the water tank or around the grinding stone.

2. Grinding Stone Care

Over time, the grinding stone may become uneven. Use a flattening stone (if available or recommended by Scheppach) to re-true the grinding stone surface, ensuring consistent sharpening results.

3. Údržba vodní nádrže

Empty and clean the water tank regularly to prevent algae growth and accumulation of grinding particles. Use clean water for each sharpening session.

Odstraňování problémů

If you encounter issues with your Scheppach TIGER5000S, consider the following common solutions:

• Stroj se nespustí: Check if the power cable is securely plugged into a working outlet. Ensure the power switch is in the 'on' position.
• Grinding stone not running true: Ensure the grinding stone is properly secured and tightened. If it still wobbles, the stone may need to be re-trued using a flattening stone.
• Špatné výsledky ostření: Verify that the correct sharpening angle is set using the angle gauge. Ensure the grinding stone is sufficiently wet and clean. The tool might require more passes or a different sharpening technique.
• Excessive burr: Ensure you are using the leather honing wheel with polishing paste after grinding to remove burrs effectively.

For persistent issues not covered here, please contact Scheppach customer support.

Specifikace

Záruka a podpora

For information regarding warranty coverage, spare parts availability, or technical support, please refer to the documentation provided with your purchase or visit the official Scheppach website. Information on spare parts availability for this product is currently unavailable through general product specifications.

For direct assistance, you may contact Scheppach customer service through their official channels.