Zavedení
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Hitachi WT-P200Y Automatic Shallow Well Pump. Please read this manual thoroughly before using the product and keep it for future reference.
The Hitachi WT-P200Y is an inverter-controlled automatic shallow well pump designed for reliable water supply. It features an easy-to-use control panel for convenient operation.
Bezpečnostní informace
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození produktu.
- Ensure the power supply matches the pump's requirements (Single Phase 100V, 50/60Hz).
- Do not operate the pump without water, as this can cause damage.
- All electrical connections must be performed by a qualified electrician in accordance with local codes.
- Během provozu držte děti a nepovolané osoby v dostatečné vzdálenosti od čerpadla.
- Před prováděním jakékoli údržby nebo oprav odpojte napájení.
- Chraňte čerpadlo před mrazem.
Nastavení a instalace
Správná instalace je klíčová pro optimální výkon a dlouhou životnost vašeho čerpadla.
- Rozbalení: Carefully remove the pump from its packaging. Inspect for any shipping damage.
- Umístění: Install the pump on a stable, level surface in a well-ventilated area, protected from direct sunlight, rain, and freezing. Ensure adequate space for maintenance.
- Připojení potrubí:
- Connect the suction pipe (25mm, Rc1) to the pump's suction inlet. Ensure an airtight seal to prevent air leaks.
- Connect the discharge pipe (25mm, Rc1) to the pump's discharge outlet.
- Use appropriate fittings and sealants to prevent leaks.
- Základní nátěr: Before initial operation, the pump must be primed.
- Remove the priming plug (if applicable) or fill the pump casing with water until full.
- Replace the plug securely.
- Elektrické připojení: Connect the power cord to a grounded 100V, 50/60Hz power outlet. Ensure the circuit is protected by a suitable circuit breaker.
Obrázek 1: Diagram showing the Hitachi WT-P200Y pump's dimensions and performance curve. The diagram illustrates the pump's physical measurements, including discharge and suction outlets, and a graph detailing the relationship between total head (m) and discharge volume (L/min) under various operating pressures and suction heights. This helps in planning installation and understanding operational limits.
Návod k obsluze
The WT-P200Y features an easy-to-use control panel for selecting operating modes.
- Počáteční spuštění:
- After ensuring proper installation and priming, plug in the pump.
- The pump will automatically start when water is demanded (e.g., opening a faucet) and stop when demand ceases.
- Selecting Operating Pressure Modes: The control panel allows selection of different pressure modes. Refer to the panel diagram for specific settings.
- Standardní režim: Provides balanced pressure for general household use.
- High Pressure Mode: For applications requiring stronger water pressure.
- Low Pressure Mode: For situations where reduced pressure is desired.
- Automatický provoz: The pump is designed for automatic operation. It will detect water demand and adjust its output accordingly, thanks to its inverter technology.
Obrázek 2: Image displaying the easy-to-use control panel of the Hitachi WT-P200Y pump. The panel allows users to select from various operating pressure modes (Standard, High, Low) to suit different water usage requirements. This image also highlights the wear-resistant elastic casing technology.
Údržba
Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho čerpadla.
- Měsíční kontroly:
- Inspect for any visible leaks around connections.
- Check for unusual noises or vibrations during operation.
- Roční kontrola:
- Clean any debris from the pump's exterior.
- Verify the condition of the power cord and plug.
- For internal component checks, it is recommended to contact a qualified service technician.
- Zimní příprava (pro chladné podnebí):
- Drain all water from the pump and piping to prevent freezing damage.
- Store the pump in a warm, dry place if possible, or insulate it thoroughly.
Obrázek 3: Vnitřní view of the Hitachi WT-P200Y pump, highlighting the innovative Y-shaped impeller design and the wear-resistant elastic casing. This design contributes to the pump's high lift capability and durability, reducing wear from sand and debris in the water.
Odstraňování problémů
V této části naleznete běžné problémy a jejich řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo se nespustí. | No power supply; tripped circuit breaker; motor overload. | Check power connection; reset circuit breaker; allow motor to cool down. |
| Čerpadlo běží, ale voda se nedodává. | Pump not primed; air leak in suction line; low water level in well; clogged suction filter. | Re-prime the pump; check all suction connections for leaks; verify well water level; clean suction filter. |
| Nízký tlak vody. | Partial clog in piping; incorrect pressure mode selected; worn impeller. | Check and clear piping; select higher pressure mode on control panel; contact service for impeller inspection. |
| Čerpadlo často cykluje. | Small leak in plumbing system; pressure switch malfunction. | Inspect plumbing for leaks; contact service for pressure switch check. |
Specifikace
| Funkce | Detail |
|---|---|
| Model | WT-P200Y |
| Značka | Hitachi |
| Zdroj napájení | Typ napájecího kabelu |
| svtage | 100 Volts (Single Phase) |
| Frekvence | 50/60 Hz |
| Jmenovitý výstup | 200W |
| Wattage (Spotřeba energie) | 440 W |
| Rozměry produktu (D x Š x V) | 35.6 x 37.6 x 49 cm |
| Hmotnost produktu | 14 kg |
| Maximální průtok | 35 litrů za minutu |
| Maximální výška zdvihu | 12 metrů |
| Barva | Šedá |
| Zahrnuté příslušenství | Návod k použití |
Obrázek 4: Generál view of the Hitachi WT-P200Y Automatic Shallow Well Pump. This image provides an overall visual reference of the product's design and appearance.
Záruka a podpora
Tento produkt je dodáván s a 1letá záruka výrobce od data nákupu. Uschovejte si prosím doklad o koupi pro případné reklamace.
For technical support, service, or warranty inquiries, please contact Hitachi Global Life Solutions customer service. Contact information can typically be found on the official Hitachi webna webu nebo v dokumentaci k nákupu.
Poznámka: Neoprávněné opravy nebo úpravy ruší platnost záruky.
