aigo AZ300 Mid Tower Computer Case User Manual

1. Úvod

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Bezpečnostní informace

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Uchovávejte malé součástky a šrouby mimo dosah dětí.
• Zajistěte správné uzemnění, abyste předešli nebezpečí úrazu elektrickým proudem.

3. Konec produktuview

3.1 Přední vstupní/výstupní panel

Přední panel I/O poskytuje pohodlný přístup k důležitým portům a ovládacím prvkům.

Obrázek 2: Rozložení předního I/O panelu

• Port typu C: 1x USB Type-C port for modern connectivity.
• Port USB 2.0: 1x USB 2.0 port for peripheral connections.
• Port USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Vypínač: Zapíná nebo vypíná počítač.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Kompatibilita základní desky: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Délka GPU: Maximum GPU length of 400mm.
• Délka PSU: Supports standard ATX power supplies up to 200mm.

4. Instalační příručka

4.1 Příprava případu

1. Umístěte pouzdro na rovný a stabilní povrch.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Instalace základní desky

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Zajistěte základní desku dodanými šrouby.

Figure 5: Motherboard Mounting Areas

4.3 Instalace jednotky napájecího zdroje (PSU)

1. Vyhledejte montážní oblast pro zdroj v zadní spodní části skříně.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Instalace úložného disku

1. 2.5" SSD disky: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5" pevné disky: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Odstraňte potřebné kryty rozšiřujících slotů ze zadní strany skříně.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Karty zajistěte šrouby.

4.6 Instalace chladicího systému

The aigo AZ300 supports flexible cooling configurations.

• Podpora fanoušků: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Podpora radiátorů: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Správa kabelů

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Provoz

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Údržba

Pravidelná údržba pomáhá zajistit optimální výkon a dlouhou životnost počítačových komponent.

6.1 Čištění prachového filtru

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Prachový filtr PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Řešení problémů

• Systém se nezapíná: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Žádný displej: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Přehřívání: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• Nefunkční USB porty: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Specifikace

9. Záruka a podpora

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webmísto.