Uživatelská příručka k elektronickému zámku Hugolog HU01-SNL

1. Konec produktuview

The Hugolog HU01-SNL Electronic Deadbolt Lock provides secure and convenient keyless entry for your home. This manual guides you through the installation, operation, and programming of your new lock.

Figure 1: Hugolog HU01-SNL Electronic Deadbolt Lock

1.1 Klíčové vlastnosti

• Keyless Entry Convenience: Unlock with a keypad, eliminating the need for physical keys. Features an auto-lock function with a programmable timer for added peace of mind.
• Auto-Lock & Anti-Peep Security: Programmable auto-lock timer from 10-99 seconds. Supports anti-peep functionality to prevent code exposure.
• Snadná instalace: Designed to fit doors 35-50mm thick and compatible with standard backsets and handle sizes. Self-adjusting for bolt side distance.
• Manage Access with Codes: Supports up to 20 user codes and single-use temporary codes, allowing flexible access management for family or guests.

1.2 Obsah balení

Obrázek 2: Obsah balení

The package includes the exterior assembly, interior assembly, latch, strike, mounting plate, installation guide, drilling template, mounting plate screws, strike screws, latch screws, cover screws, reset tool, backup key, and an optional bolt faceplate.

1.3 Specifikace

2. Nastavení a instalace

2.1 Kontroly před instalací

Before beginning installation, ensure your door is prepared and meets the following dimensions:

• Door Hole: 2-1/8 inches (54 mm)
• Backset: 2-3/8 inches (60 mm) or 2-3/4 inches (70 mm)
• Door Edge Hole: 1 inch (25 mm)
• Door Thickness: 1-3/8 inches to 2 inches (35 to 50 mm)

Figure 3: Door Preparation and Dimensions

2.2 Postup instalace

Follow these steps to install your Hugolog electronic deadbolt lock:

1. Nainstalujte západku: Ensure the latch is oriented correctly (facing upwards) and install it into the door frame. Secure it with two screws. Test the deadbolt's smooth operation with a screwdriver and keep the latch in the retracted (unlocked) position.
2. Instalace vnější sestavy: Hold the exterior assembly flush against the door. Guide the key tailpiece and power cable through the door hole.
3. Instalace montážní desky: Install the mounting plate, ensuring it is parallel to the door edge. Secure it with the provided screws.
4. Připojte vnitřní sestavu: Connect the power cable from the exterior assembly to the socket on the interior PCB. Rotate the thumb turn to a vertical, upward-facing position.
5. Fix Interior Assembly: Fix the interior assembly to the mounting plate. Test if the latch works smoothly by rotating the thumb turn.
6. Insert Batteries and Reset: With the lock in the unlocked state, insert three new AA alkaline batteries into the battery pack. Use the reset tool to press and hold the reset hole for 3 seconds until you hear a beep. The deadbolt will then reallocate to learn the door's orientation.
7. Kompletní instalace: Put back the lid of the battery pack. Test the lock's functionality using the backup key and the default master pin code (12345678).

Obrázek 4: Jednoduché kroky instalace

3. Návod k obsluze

3.1 Odemykání a zamykání

The Hugolog deadbolt offers multiple ways to unlock and lock your door:

• Klávesnice: Enter your programmed user code or master code on the keypad.
• Fyzický klíč: Pro ruční odemknutí použijte dodaný záložní klíč.
• Otočení palce: Manually lock or unlock the deadbolt from the interior using the thumb turn.

Obrázek 5: Více metod odemykání

3.2 Multi-Function Button (MFB) Usage

The button with the Hugolog logo on the keypad is the Multi-Function Button (MFB). It is used for entering administrator mode and confirming operations.

4. Průvodce programováním

All pin codes must be 4-10 digits long. Avoid forward/backward number sequences or repeating number sequences for security. Existing code sequences are also invalid.

4.1 Změňte hlavní kód

The default master pin code is [12345678]. You will be prompted to change this code before adding any other codes for security reasons.

1. Dvakrát stiskněte MFB.
2. Zadejte aktuální hlavní kód.
3. Stiskněte MFB.
4. Wait for long green lights, then press '1'.
5. Enter your New Master Code.
6. Stiskněte MFB.
7. Re-enter your New Master Code to verify.
8. Press the MFB to store the new master code.

4.2 Add User Code

You can add up to 20 user codes.

1. Dvakrát stiskněte MFB.
2. Zadejte hlavní kód.
3. Stiskněte MFB.
4. Wait for long green lights, then press '2'.
5. Zadejte nový uživatelský kód.
6. Stiskněte MFB.
7. Re-enter the New User Code to verify.
8. Press the MFB to add the new user code.

4.3 Delete User Code

To delete an unwanted user code:

1. Dvakrát stiskněte MFB.
2. Zadejte hlavní kód.
3. Stiskněte MFB.
4. Wait for long green lights, then press '3'.
5. Zadejte uživatelský kód, který chcete odstranit.
6. Press the MFB to delete the user code.

4.4 Tichý režim

Silent Mode disables all beeps and sounds from the lock. It is disabled by default.

1. To Enable Silent Mode: Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '4', then '2', then MFB.
2. To Disable Silent Mode: Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '4', then '1', then MFB.

4.5 Časové zpoždění automatického zámku

The auto-lock function automatically locks the door after a set period. The default delay is 30 seconds.

1. To Enable Auto-Lock: Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '5', then '1', then MFB.
2. To Disable Auto-Lock: Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '5', then '2', then MFB.
3. To Set Auto-Lock Time Delay (10-99 seconds): Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '8', enter the desired delay time (e.g., '30' for 30 seconds), then MFB.

Figure 6: Auto-Lock for peace of mind

4.6 Add One-Time Code

A one-time code will expire after a single use.

1. Dvakrát stiskněte MFB.
2. Zadejte hlavní kód.
3. Stiskněte MFB.
4. Wait for long green lights, then press '7'.
5. Enter the New One-Time Code.
6. Stiskněte MFB.
7. Re-enter the New One-Time Code to verify.
8. Press the MFB to add the one-time code.

Figure 7: Managing Access with User Codes

4.7 Režim dovolené

In Vacation Mode, the lock will reject all user codes until the master code is entered. If the lock is unlocked by key or thumb turn while in Vacation Mode, an alarm will sound.

1. To Enable Vacation Mode: Double-press the MFB, enter Master Code, press MFB, wait for long green lights, then press '6', then MFB.
2. To Disable Vacation Mode: Zadejte hlavní kód.

Figure 8: Anti-Peep Pin Code

5. Řešení problémů

For common issues and solutions, please refer to the detailed troubleshooting section in the full user manual. If the problem persists or cannot be resolved, please contact customer support.

6. Záruka a podpora

Hugolog provides satisfactory service with no hidden fees. For technical support or warranty inquiries, please contact us directly.