Amazon Basics Smart Single Pole Switch User Manual

1. Úvod

The Amazon Basics Smart Single Pole Switch (Model WS29-01) allows you to control your lighting with convenience and smart home integration. Designed to work exclusively with Amazon Alexa, this switch enables voice control and scheduling of your lights without the need for a separate smart home hub. It connects directly to your 2.4 GHz Wi-Fi network.

Image 1.1: Amazon Basics Smart Single Pole Switch and its retail packaging.

This manual provides essential information for the safe installation, operation, and maintenance of your smart switch. Please read it thoroughly before installation and keep it for future reference.

2. Bezpečnostní informace

VAROVÁNÍ: RIZIKO ÚRAZU ELEKTRICKÝM PROUDEM.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and safety.
• Always turn off power at the circuit breaker before installing or servicing the switch. Verify power is off with a voltage tester.
• This device is intended for installation in a standard wall box. Ensure the wall box has sufficient space for the switch and wiring.
• Nepřekračujte maximální elektrické jmenovité hodnoty spínače (5 Amps, 120 Volts).
• A neutral wire is required for the operation of this smart switch. If your wall box does not have a neutral wire, consult a qualified electrician.
• Používejte pouze měděné vodiče.
• Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození (varování podle návrhu 65).

3. Předinstalační požadavky

Before beginning installation, ensure your home and existing electrical setup meet the following criteria:

• Neutrální vodič: A neutral wire is required for this smart switch. Look for a bundle of white wires in your switch box. Most US houses built after 1978 include neutral wires.
• 2.4GHz Wi-Fi: You must have a 2.4 GHz Wi-Fi network available in the installation area. This switch does not support 5 GHz Wi-Fi.
• Amazon Alexa Device: This switch works exclusively with Amazon Alexa. You will need an Alexa-enabled device (e.g., Echo, Echo Dot) and the Alexa app to set up and control the switch.
• Jednopólové zapojení: This is a single pole switch, designed to control a light from one location only. Do not attempt to install it in a 3-way or multi-way circuit.

Image 3.1: Visual guide for checking neutral wire and 2.4 GHz Wi-Fi availability.

4. Obsah balení

• Amazon Basics Smart Single Pole Switch (WS29-01)
• Drátěné matice
• Montážní šrouby
• Návod k použití

5. Instalace

Installation involves working with electrical wiring. If you are unfamiliar with electrical work or uncomfortable with the process, it is strongly recommended to contact a licensed electrician.

Image 5.1: Options for installation: Do-It-Yourself with tools or contact an electrician.

Požadované nástroje:

• Šroubovák (křížový a/nebo plochý)
• svtage Tester

Kroky instalace:

1. Vypnout napájení: Locate the circuit breaker that controls the light switch you intend to replace. Turn off the power to that circuit. Use a voltagtesterem, abyste ověřili, že je v místě spínače vypnuté napájení.
2. Demontáž starého spínače: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (Line, Load, Neutral, Ground). It is recommended to label the wires.
3. Identifikace vodičů:
   • Line Wire (Hot): Obvykle černá, přivádí napájení z jističe.
   • Zaváděcí drát: Typically black, goes to the light fixture.
   • Neutrální vodič: Typically white, required for smart switches.
   • Zemnící vodič: Typicky holá měď nebo zelená.
4. Zapojení inteligentního přepínače: Connect the wires from your wall box to the corresponding terminals on the Amazon Basics Smart Switch using wire nuts:
   • Připojte Čára wire to the switch's LINE terminal.
   • Připojte Zatížení wire to the switch's LOAD terminal.
   • Připojte Neutrální wire to the switch's NEUTRAL terminal.
   • Připojte Země wire to the switch's GROUND terminal.
5. Namontujte spínač: Carefully fold the wires into the wall box, ensuring they are not pinched. Secure the smart switch into the wall box with the provided screws. Attach the new wall plate.
6. Obnovit napájení: Turn the power back on at the circuit breaker. The status indicator on the switch should illuminate, indicating it is ready for setup.

6. Návod k obsluze

Once installed and connected to your Alexa account, the Amazon Basics Smart Single Pole Switch offers multiple ways to control your lights.

Obrázek 6.1: Přední strana view of the smart switch highlighting the On/Off switch and Status Indicator.

Physical Control:

Press the rocker switch on the front of the device to manually turn the connected light ON or OFF. The status indicator light will change to reflect the current state.

Hlasové ovládání s Alexou:

After successfully linking the switch to your Alexa account, you can use voice commands to control your lights. Ensure your Alexa device is within hearing range.

• „Alexo, zapni [Název světla].“
• „Alexo, vypni [Jméno světla].“
• "Alexa, set [Light Name] to 50%." (Note: This is a non-dimming switch, so percentage commands may not apply or will result in on/off behavior).

You can customize the name of your light in the Alexa app.

Scheduling and Routines with Alexa:

Utilize the Alexa app to create routines and schedules for your smart switch. This allows for automated control of your lights based on time, sunrise/sunset, or other triggers.

• Otevřete aplikaci Alexa.
• Navigate to the "More" tab, then select "Routines."
• Create new routines to turn your lights on or off at specific times, or as part of a larger smart home automation sequence.

7. Údržba

The Amazon Basics Smart Single Pole Switch requires minimal maintenance.

• Čištění: K čištění spínače jemně otřete povrch měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani nadměrnou vlhkost.
• Pravidelné kontroly: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are observed, turn off power at the circuit breaker and consult a qualified electrician.

8. Řešení problémů

If you encounter issues with your smart switch, refer to the following troubleshooting steps:

• Přepínač nereaguje:
  • Ensure the circuit breaker is ON.
  • Check if the status indicator light on the switch is illuminated. If not, power cycle the switch at the circuit breaker.
  • Verify that the wiring connections are secure. (Turn off power at the breaker before checking).
• Cannot Connect to Wi-Fi/Alexa:
  • Confirm your Wi-Fi network is 2.4 GHz. This switch does not support 5 GHz networks.
  • Ensure your Wi-Fi router is working correctly and the signal strength is adequate at the switch location.
  • Restartujte Wi-Fi router.
  • Ensure your Alexa app is up to date and your Alexa device is online.
  • Try resetting the smart switch (refer to the Alexa app for specific reset instructions, usually involving holding the switch button for a period).
  • If you are outside the United States, ensure your Amazon account region is set to a supported region (e.g., United States) as some users have reported connectivity issues in other regions.
• Hlasové příkazy nefungují:
  • Verify that your Alexa device is powered on and connected to the internet.
  • Check the device name in the Alexa app to ensure it matches the name you are using in your voice commands.
  • Ensure the smart switch is linked to your Alexa account and appears in the Alexa app's device list.

9. Specifikace

10. Záruka a podpora

Informace o záruce a zákaznické podpoře získáte od oficiálního zástupce Amazon Basics. website or contact Amazon customer service directly. Details regarding product registration, warranty claims, and technical assistance can typically be found on the product support pages.

You can visit the Amazon Basics store for more information: Základní obchod Amazonu