Carson 500501007

Carson FS Reflex Stick II 2.4GHz 6-Channel Radio Control System User Manual

Model: 500501007

Zavedení

This manual provides detailed instructions for the Carson FS Reflex Stick II 2.4GHz 6-channel radio control system. This high-quality, modern remote control is designed for universal use with various RC vehicles and ships. It features 6 independently controllable channels, making it compatible with TAMIYA MF and DMD units. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

Bezpečnostní pokyny

Obsah balení

Po vybalení se prosím ujistěte, že jsou všechny součásti přítomny a nepoškozené:

Note: AA batteries for the transmitter are not included and must be purchased separately.

Konec produktuview

The Carson FS Reflex Stick II transmitter features a robust design with a carbon look. It includes two control sticks for primary functions and additional buttons/switches for auxiliary channels.

Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter

Obrázek 1: Přední view of the Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter. This image shows the overall layout of the transmitter, including the two main control sticks, the 2.4GHz antenna, and the various switches and buttons for channel control.

Součásti vysílače:

Close-up of 6-channel switch on Carson FS Reflex Stick II transmitter

Obrázek 2: Detailní záběr view of an auxiliary 6-channel switch on the Carson FS Reflex Stick II transmitter. This image highlights one of the toggle switches used for controlling additional functions on your RC model.

Nastavení

1. Instalace baterie (vysílač)

  1. Otevřete kryt přihrádky na baterie na zadní straně vysílače.
  2. Vložte 4 nové baterie typu AA a dbejte na správnou polaritu (+/-).
  3. Bezpečně zavřete kryt bateriového prostoru.

2. Připojení přijímače

Connect the receiver to your RC model's electronic speed controller (ESC) and servos according to your model's specific instructions. Ensure all connections are firm and correctly oriented.

3. Propojení vysílače a přijímače

The transmitter and receiver are usually pre-bound from the factory. If re-binding is necessary:

  1. Ujistěte se, že je vysílač VYPNUTÝ.
  2. Connect the bind plug (not included, usually comes with receiver or ESC) to the BIND/VCC port on the receiver.
  3. Zapněte přijímač. LED dioda přijímače by měla rychle blikat.
  4. Press and hold the BIND button on the transmitter while turning it ON.
  5. Release the BIND button after a few seconds. The receiver's LED should now be solid, indicating a successful bind.
  6. Turn off the receiver, then the transmitter. Remove the bind plug from the receiver.
  7. Restart the system (transmitter ON first, then receiver) to confirm the bind.

Návod k obsluze

1. Zapnutí/vypnutí

2. Basic Control Functions

3. Auxiliary Channel Control

The two additional switches (one push-button, one toggle switch) control channels 5 and 6. These are typically used for non-proportional functions:

4. Servo Reverse

If a servo moves in the opposite direction to your stick input, use the corresponding servo reverse switch on the transmitter to correct its direction. There is a servo reverse switch for each channel.

Údržba

Čištění

Skladování

Odstraňování problémů

ProblémMožná příčinaŘešení
Vysílač není napájenVybité nebo nesprávně vložené baterie.Vyměňte baterie za nové baterie typu AA a dbejte na správnou polaritu.
No control response from modelTransmitter and receiver not bound; receiver not powered; incorrect connections.Proveďte párování; zkontrolujte napájení přijímače; ověřte všechna připojení.
Servo moves in wrong directionIncorrect servo direction setting.Adjust the corresponding servo reverse switch on the transmitter.
Omezený dosah nebo přerušovaná regulaceLow transmitter/receiver battery; interference; damaged antenna.Replace batteries; operate in an open area away from other 2.4GHz devices; check antennas for damage.

Specifikace

Záruka a podpora

For warranty information or technical support, please refer to the official Carson webnebo se obraťte na prodejce. Uschovejte si účtenku jako doklad o koupi.