Konec produktuview
The Scheppach HS250L SE is a powerful 2000W table saw designed for precise cutting of various wood materials. It features a laser cutting guide for accuracy, a robust stand, and extendable table surfaces for handling larger workpieces. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your table saw.
Image: The Scheppach HS250L SE Table Saw, shown with its integrated stand and two included saw blades. This view highlights the main components of the saw, including the table, blade guard, and control panel.
Bezpečnostní pokyny
Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the Scheppach HS250L SE table saw. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Používejte vhodné osobní ochranné prostředky (OOP), včetně ochranných brýlí, ochrany sluchu a protiprachové masky.
- Ujistěte se, že pracovní prostor je čistý, dobře osvětlený a bez překážek.
- Udržujte děti a přihlížející mimo provozní oblast.
- Nepracujte s pilou v damp nebo vlhké podmínky.
- Always unplug the saw before making adjustments, changing blades, or performing maintenance.
- Use a push stick when cutting small workpieces.
- Ensure the blade guard is always in place and functioning correctly.
Nastavení
Proper assembly and setup are crucial for the performance and safety of your table saw.
Vybalení a kontrola
- Opatrně vyjměte všechny součásti z obalu.
- Check for any shipping damage or missing parts. Refer to the included parts list.
- Obalový materiál likvidujte zodpovědně.
Montáž stojanu
Assemble the robust stand according to the diagrams provided in the full manual. Ensure all bolts and fasteners are securely tightened for stability.
Image: The Scheppach HS250L SE Table Saw fully assembled on its stable stand, demonstrating its robust construction and non-slip rubber feet for high stability during operation.
Attaching Table Extensions
The table saw includes additional table extensions for both the left and right sides. Attach these extensions to expand your working surface, which is particularly useful for larger workpieces.
Obrázek: Detailní záběr view of the Scheppach HS250L SE Table Saw, showing the table extension in use. This feature allows for processing larger workpieces by providing an extended support surface.
Instalace čepele
The saw comes with two Ø 254 mm carbide saw blades. Ensure the saw is unplugged before installing or changing blades. Follow the directional arrows on the blade and the saw for correct orientation.
Laser Guide Setup
The integrated laser cutting guide requires batteries (included). Install the batteries and test the laser alignment. Adjust if necessary to ensure it accurately indicates the cutting line.
Návod k obsluze
Familiarize yourself with the controls and functions before beginning any cutting operations.
Zapnutí/vypnutí
- Connect the power cable to a suitable 230V electrical outlet.
- Press the green "ON" button to start the saw.
- Press the red "OFF" button to stop the saw.
Adjusting Cutting Depth and Angle
The saw allows for precise adjustments of cutting depth and angle:
- Hloubka řezu: Use the depth adjustment mechanism to set the desired cutting depth. Maximum cutting depth at 90° is 87 mm, and at 45° is 55 mm.
- Úhel řezu: The swiveling cross stop can be adjusted from -45° to 45° for miter cuts.
Image: A diagram illustrating the maximum cutting heights of the Scheppach HS250L SE Table Saw at 90° (87 mm) and 45° (55 mm). It also shows the table extension capability and the ergonomic table height of 870 mm.
Provádění řezů
Always ensure the workpiece is securely supported and guided. Use the rip fence for straight cuts and the miter gauge for angled cuts. Engage the laser guide for enhanced accuracy.
Image: A person demonstrating the use of the Scheppach HS250L SE Table Saw, highlighting the ergonomic working posture enabled by the 870 mm table height. The user is guiding a wooden board through the saw.
Aplikace Přamples
The Scheppach HS250L SE is suitable for various cutting tasks on wood, including:
- Cutting beams
- Cutting profile desky
- Cutting general boards
- Performing rip cuts (longitudinal cuts)
- Performing miter cuts (angled cuts)
Image: A diagram illustrating various cutting applications for the Scheppach HS250L SE Table Saw, including cutting beams, profile boards, and general boards, as well as demonstrating rip cuts and miter cuts.
Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vaší stolní pily.
- Čištění: After each use, unplug the saw and clean off sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
- Kontrola čepele: Pravidelně kontrolujte pilový kotouč, zda není ostrý, poškozený nebo zda nechybí zuby. Tupé nebo poškozené kotouče ihned vyměňte.
- Mazání: Periodically lubricate moving parts as indicated in the full manual to ensure smooth operation.
- Elektrický kabel: Check the power cord for any signs of damage. Do not use the saw if the cord is frayed or damaged.
Odstraňování problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat při používání stolní pily.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Pila se nespustí | No power supply; tripped circuit breaker; faulty switch | Zkontrolujte připojení napájení; resetujte jistič; kontaktujte servis ohledně výměny spínače. |
| Nůž neřeže hladce | Dull or damaged blade; incorrect blade installation; improper feed rate | Replace blade; ensure correct blade orientation; adjust feed rate. |
| Nadměrné vibrace | Loose components; damaged blade; unstable stand | Tighten all fasteners; replace damaged blade; ensure stand is on a level surface. |
| Laserový naváděcí přístroj nefunguje | Dead batteries; laser lens obstructed | Replace batteries; clean laser lens. |
For issues not listed here, please consult the comprehensive troubleshooting guide in the full product manual or contact Scheppach customer support.
Specifikace
Key technical specifications for the Scheppach HS250L SE Table Saw:
- Model: HS250L SE
- Výrobce: Scheppach
- Číslo dílu: 21682/83882
- Zdroj napájení: Elektrický kabel
- svtage: 230 voltů
- Wattage: 2000 Wattů
- Průměr čepele: 254 mm
- Počet zubů: 24 (per included blade)
- Max. Hloubka řezu při 90°: 87 mm
- Max. Hloubka řezu při 45°: 55 mm
- Swiveling Cross Stop: -45° až 45°
- Table Height (Ergonomic): 870 mm
- Hmotnost: 21.95 kg
- Zahrnuté komponenty: 2 saw blades, extra table extension left and right, laser cutting guide (incl. batteries)
Záruka a podpora
For detailed information regarding warranty coverage, technical support, or spare parts, please refer to the official Scheppach webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.
Poznámka: Konkrétní záruční podmínky se mohou lišit v závislosti na regionu.
