Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Fortis Scala 842080C Wall Mounted Widespread Bathroom Faucet. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure optimal performance and longevity of your faucet.
Bezpečnostní informace
- Před zahájením jakékoli instalace nebo opravy vždy uzavřete hlavní přívod vody.
- Během instalace používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
- Pokud si nejste jisti některou částí instalace, poraďte se s kvalifikovaným instalatérem.
- Ujistěte se, že všechna připojení jsou bezpečná, aby nedošlo k únikům.
- This product is designed for use with potable water only.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Faucet Spout Assembly
- Handle Assembly (Single Lever)
- Montážní hardware
- Návod k použití (tento dokument)

Image: Fortis Scala 842080C Wall Mounted Widespread Bathroom Faucet, showing the spout and single lever handle in a brushed black finish. This image illustrates the main components included in the package.
Specifikace
| Značka | Fortis |
| Číslo modelu | 842080C |
| Typ montáže | Wall Mount, Widespread (2-hole configuration, 8" centers) |
| Typ dokončení | Kartáčovaná černá |
| Počet úchytů | 1 (Jednopáková) |
| Materiál | Masivní mosaz |
| Průtok | 1.2 galonů za minutu (GPM) |
| Typ ventilu | Keramický talířový ventil |
| Dodržování | ADA Compliant, Lead-Free Certified |
| Hmotnost položky | 8.7 libry |
| Rozměry produktu | Approximately 1 x 1 x 1 inches (Note: Refer to product diagrams for precise measurements) |
Nastavení a instalace
Doporučuje se odborná instalace.
Potřebné nástroje a materiály (nejsou součástí balení):
- Nastavitelný klíč
- Šroubovák s křížovou hlavou
- Instalatérský tmel nebo silikonový tmel
- Těsnicí páska na závity (teflonová páska)
- Ochranné brýle
- Rukavice
Kroky před instalací:
- Vypněte přívod vody: Locate the main water shut-off valve and turn off the water supply to the bathroom. Open nearby faucets to drain any remaining water from the lines.
- Vyčistěte pracovní oblast: Ensure the installation area is clean and free of obstructions.
- Zkontrolujte komponenty: Unpack all parts and inspect them for any damage. Contact customer support if any parts are missing or damaged.
Postup instalace:
- Prepare Wall Openings: Ensure the wall openings for the spout and handle are correctly spaced at 8 inches center-to-center.
- Install Valve Body (Rough-in): Follow the rough-in instructions provided with the valve body (if separate) to install it within the wall. Ensure it is level and securely fastened.
- Připojení vodovodního potrubí: Connect the hot and cold water supply lines to the appropriate inlets on the valve body. Use thread seal tape on all threaded connections and tighten securely with a wrench.
- Install Spout Assembly: Insert the spout assembly into its designated wall opening. Apply a bead of silicone sealant around the base of the escutcheon plate before securing it to the wall. Connect the spout to the valve body outlet.
- Montáž sestavy rukojeti: Insert the handle assembly into its designated wall opening. Secure the escutcheon plate to the wall, applying sealant as needed. Attach the handle lever to the valve stem according to the specific design.
- Zkouška těsnosti: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, turn off the water, tighten the connections, and re-test.
- Splachovací kohoutek: Once installation is complete and no leaks are present, remove the aerator from the spout. Turn on the faucet to full hot and full cold for one minute each to flush out any debris from the water lines. Turn off the faucet, re-install the aerator.
Operace
The Fortis Scala 842080C faucet features a single lever handle for controlling both water flow and temperature.
- Zapnutí/vypnutí: Zvedněte rukojeť pro zapnutí vody. Zatlačte rukojeť dolů pro vypnutí vody.
- Nastavení průtoku vody: Čím dále zvednete rukojeť, tím větší bude průtok vody.
- Nastavení teploty vody: Posuňte rukojeť doleva pro horkou vodu a doprava pro studenou vodu. Střední poloha zajišťuje směs horké a studené vody.
Údržba
Čištění:
- Pravidelně čistěte kohoutek měkkým hadříkem, jemným mýdlem a vodou.
- Nepoužívejte abrazivní čisticí prostředky, agresivní chemikálie nebo drátěnky, protože by mohly poškodit povrchovou úpravu.
- Po čištění důkladně opláchněte a osušte měkkým hadříkem, abyste zabránili vzniku skvrn od vody.
Údržba provzdušňovače:
- If water flow decreases or becomes irregular, the aerator may be clogged.
- Odšroubujte perlátor z konce výpusti.
- Rinse the aerator under running water to remove any debris. Use a soft brush if necessary.
- Re-install the aerator, ensuring it is securely tightened.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nízký průtok vody | Ucpaný provzdušňovač; částečně uzavřený uzavírací ventil; nečistoty ve vodovodním potrubí. | Vyčistěte provzdušňovač. Ujistěte se, že jsou uzavírací ventily zcela otevřené. Propláchněte vodovodní potrubí. |
| Úniky z podstavce kohoutku | Uvolněné montážní matice; nesprávné nanesení tmelu. | Tighten mounting nuts. Reapply plumber's putty or silicone sealant if necessary. |
| Úniky z rukojeti | Opotřebované O-kroužky nebo kazeta. | Contact customer support for replacement parts or professional assistance. |
| Problémy s teplotou vody | Improper hot/cold water line connection; water heater issues. | Verify hot and cold lines are connected correctly. Check water heater settings. |
Záruka a podpora
The Fortis Scala 842080C Faucet is covered under Fortis's limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Fortis webmísto.
For technical assistance, replacement parts, or warranty claims, please contact Fortis Customer Support:
- Webmísto: www.fortisfaucet.com
- Telefon: [Insert Fortis Customer Service Phone Number Here]
- E-mail: [Insert Fortis Customer Service Email Here]
When contacting support, please have your model number (842080C) and date of purchase available.





