1. Konec produktuview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. Bezpečnostní pokyny
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- Nezkratujte kontakty baterie.
- Neponořujte baterie do vody ani jiných kapalin.
- Baterie skladujte na chladném a suchém místě, mimo dosah hořlavých materiálů.
- Only use original Einhell chargers for charging.
- Do not attempt to open, modify, or repair the battery pack.
- Udržujte baterie mimo dosah dětí.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. Nastavení a první použití
3.1 Vybalení
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 Nabíjení baterií
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- Připojte nabíječku do vhodné elektrické zásuvky.
- Zasuňte baterii do nabíječky, dokud nezacvakne na místo.
- Stav nabíjení bude indikovat kontrolka nabíječky. Konkrétní vzorce světelných signálů naleznete v návodu k obsluze nabíječky.
- Po úplném nabití se kontrolka změní (např. bude svítit trvale zeleně). Vyjměte baterii z nabíječky.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Operating the Batteries
4.1 Vložení baterie do nástroje
Před vložením nebo vyjmutím baterie se ujistěte, že je nářadí vypnuté.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Slide the battery firmly into the slot until it clicks securely into place.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 Indikátor nabití baterie
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- 4 LED svítí: 75-100% nabití
- 3 LED svítí: 50-75% nabití
- 2 LED svítí: 25-50% nabití
- 1 LED svítí: Nabití 0–25 % (brzy dobití)
5. Údržba a skladování
5.1 Čištění
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 Skladování
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Baterie se nenabíjí. | Charger not plugged in; faulty charger; battery too hot/cold; faulty battery. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| Nářadí nefunguje na baterii. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. Specifikace
- Číslo modelu: 4511526
- Typ baterie: Lithium Ion (Li-Ion)
- svtage: 18 V
- Kapacita: 5.2 Ah (Ampere-hours)
- Rozměry produktu: 4.84 x 3.03 x 2.87 palce (12.3 x 7.7 x 7.3 cm)
- Hmotnost položky: 1.96 liber (0.89 kg) na baterii
- Počet baterií: 2 (included in twinpack)
- Doporučené použití: Power Tools within the Einhell Power X-Change system
8. Záruka a podpora
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell webwebu. S dotazy ohledně technické podpory, náhradních dílů nebo servisu se prosím obraťte na zákaznický servis Einhell prostřednictvím jejich oficiálních kanálů.
Oficiální Einhell Webmísto: www.einhell.com
