1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Obrázek 1.1: Přední strana view of the SEBSON Outdoor Motion Detector.
2. Bezpečnostní pokyny
Vždy dodržujte následující bezpečnostní opatření, abyste předešli zranění nebo poškození zařízení:
- Elektrická bezpečnost: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- svtage: Zajistěte provozní objtage of 230V AC matches your electrical supply.
- Stupeň krytí IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montáž: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Děti: Uchovávejte obalové materiály a malé součásti mimo dosah dětí.
3. Obsah balení
Balíček obsahuje:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Konec produktuview a funkce
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Rozsah detekce: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- LED kompatibilní: Podporuje LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Odolný design: IP44 rated for outdoor use, anthracite color, made of plastic.
Obrázek 4.1: Konecview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Nastavení a instalace
Pro správnou instalaci postupujte podle následujících kroků:
- Připravte se na instalaci: Před zahájením práce se ujistěte, že je hlavní přívod proudu do prostoru instalace vypnut jističem.
- Vyberte místo montáže: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montáž základny:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Vyvrtejte otvory v označených bodech. V případě potřeby vložte vhodné hmoždinky.
- Secure the detector's base firmly to the wall using screws.
- Připojení kabeláže: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Obrázek 5.1: Příkladample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Zavřít bydlení: Carefully close the detector housing, ensuring no wires are pinched.
- Obnovit napájení: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Pokyny k obsluze a nastavení
The motion detector features two adjustable dials for customizing its operation:
Obrázek 6.1: Detail view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Otočte volič směrem k ikona slunce for activation in brighter conditions (e.g., during the day).
- Otočte volič směrem k ikona měsíce for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Údržba
To ensure optimal performance and longevity of your motion detector:
- Čištění: Regularly clean the sensor lens and the outer casins měkkým, suchým nebo mírně damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Inspekce: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Environmentální faktory: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Řešení problémů
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí, když je detekován pohyb. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Specifikace
| Funkce | Specifikace |
|---|---|
| Výrobce | SEBSON |
| Číslo modelu | IR_OUT_BA |
| Rozměry produktu (D x Š x V) | 8.6 x 6 x 9.6 cm |
| Hmotnost | 155 gramů |
| Barva | Antracit |
| Materiál | Plast |
| Zdroj napájení | AC |
| svtage | 230 voltů |
| Max. Power (LED) | 300 wattů |
| Max. výkon (žárovka) | 1200 wattů |
| Způsob instalace | Wall Mount (Surface-Mounted) |
| Kompatibilita typů žárovek | LED |
| Rozsah detekce | 12 m / 180° |
| Swiveling Angle | 300° (vertical) |
| Doba svícení (TIME) | 10 sekund - 7 minut |
| Ambient Brightness (LUX) | 3 - 1 000 000 luxů |
| Hodnocení IP | IP44 |
| Doporučená použití | Venkovní |
| Horní jmenovitá teplota | 40 stupňů Celsia |
| Země původu | Čína |
10. Záruka a podpora
Zásady vrácení: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Zákaznická podpora: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
