Ranco ETC-141000-000 Digital Temperature Electronic Controller User Manual

1. Úvod

The Ranco ETC Series Electronic Temperature Control, model ETC-141000-000, is designed as a full-featured electronic replacement for electro-mechanical temperature controls commonly used in commercial refrigeration applications. This controller offers significant application flexibility due to its wide temperature range, single and two-stage capability, selectable heating/cooling modes, and multi-voltage input (120/208/240V AC).

2. Důležité bezpečnostní informace

• Always disconnect power to the unit before installation, servicing, or maintenance to prevent electrical shock.
• Installation should be performed by a qualified technician in accordance with all local and national electrical codes.
• Zajistěte napájení objtage matches the controller's specifications (120/208/240V AC).
• Do not operate the controller with damaged wiring or if the enclosure is compromised.
• The sensor is rated IP67 for dust and water protection; however, ensure proper sealing and protection for all electrical connections.

3. Konec produktuview a funkce

The Ranco ETC-141000-000 controller provides precise temperature management with a user-friendly interface and robust design. Key features include:

• Široký teplotní rozsah: Funguje v rozmezí teplot od -34.4 °C do 104.4 °C (od -30 °F do 220 °F).
• Adjustable Differential: Allows setting a differential from 1°F to 30°F (-17°C to -1°C).
• LCD Read-out: Displays sensor temperature, control settings, and relay status with a white backlight.
• Vysoký Amp Výstupní relé: Svobodné stage s 16 Amps @ 120V AC and 8 Amps @ 208/240V AC.
• EEPROM Memory: Retains all control settings during power outages.
• Blokování klávesnice: Prevents unauthorized alteration of settings.
• Sensor Lead: Includes an 8-foot lead, extendable up to 400 feet using 18 or 22-gauge thermostat wire.
• Easy 4-Step Set-up: Simplifies initial configuration.
• Heavy-Duty Relay: 1 HP rated for demanding applications.
• Selectable Modes: Choose between Fahrenheit or Celsius, and heating or cooling modes.
• Příloha: Available in NEMA 1 case and NEMA 4X models for outdoor use.

Image showing the Ranco ETC-141000-000 Digital Temperature Electronic Controller, its retail packaging, and the included instruction sheet. The packaging displays the UPC 00686608004413 and model number ETC-141000.

The UPC for this product is 00686608004413.

4. Nastavení a instalace

4.1. Montáž

Mount the controller in a location that is easily accessible for viewing and adjustments, away from direct heat sources or excessive vibration. Ensure the chosen location is appropriate for the controller's enclosure type (NEMA 1 for indoor use, NEMA 4X for outdoor or wash-down environments). Use appropriate fasteners to secure the unit firmly.

4.2. Zapojení

All wiring must comply with local and national electrical codes. It is recommended that a qualified electrician perform the installation.

1. Odpojit napájení: Ensure all power to the circuit is disconnected before beginning any wiring.
2. Příkon: Connect the appropriate line voltage (120V, 208V, or 240V AC) to the designated power input terminals on the controller.
3. Výstupní zatížení: Connect the controlled device (e.g., compressor, heater) to the output relay terminals. Observe the maximum current ratings (16 Amps @ 120V AC, 8 Amps @ 208/240V AC).
4. Připojení senzoru: Connect the temperature sensor lead to the sensor input terminals. The 8-foot sensor lead can be extended up to 400 feet using 18 or 22-gauge thermostat wire. Ensure all connections are secure and properly insulated.
5. Základy: Properly ground the controller according to electrical codes.

Detailní záběr view of the Ranco ETC-141000-000 Digital Temperature Electronic Controller, highlighting the digital display, control buttons (SET, Up, Down), and the NEMA 4X outdoor enclosure rating. The temperature sensor is also visible.

5. Návod k obsluze

The ETC-141000-000 features an intuitive interface for setting and monitoring temperature.

5.1. Initial Power-Up and Basic Settings

Upon initial power-up, the controller will perform a self-test. Follow the easy 4-step set-up process outlined in the quick start guide (typically included with the product) to configure basic parameters.

5.2. Setting Temperature (Setpoint)

1. Stiskněte tlačítko SOUBOR button once. The current setpoint will flash on the display.
2. Použijte UP or DOLŮ šipkami nastavte požadovanou hodnotu teploty.
3. Stiskněte tlačítko SOUBOR button again to confirm and save the new setpoint, or wait a few seconds for it to automatically save and return to normal operation.

5.3. Selecting Heating/Cooling Mode

The controller can operate in either heating or cooling mode. Refer to the detailed programming instructions in the full manual for specific steps to switch between these modes. This setting determines whether the output relay activates when the temperature rises above or falls below the setpoint.

5.4. Differential Adjustment

The differential (also known as hysteresis) prevents rapid cycling of the controlled device. To adjust the differential (range 1°F to 30°F):

1. Access the advanced programming menu (refer to the full manual for specific button combinations).
2. Navigate to the differential setting parameter.
3. Použijte UP or DOLŮ arrow buttons to set the desired differential value.
4. Save the setting and exit the programming menu.

5.5. Blokování klávesnice

To prevent unauthorized changes to settings, the keypad can be locked. Consult the full instruction manual for the specific procedure to enable and disable the keypad lockout feature.

6. Údržba

The Ranco ETC-141000-000 is designed for reliable operation with minimal maintenance.

• Čištění: Pravidelně otírejte vnější povrch ovladače měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Kontrola senzoru: Regularly inspect the temperature sensor and its lead for any signs of damage or corrosion. Ensure the sensor is properly positioned for accurate temperature readings. The sensor is IP67 rated, but physical damage can compromise its integrity.
• Kontroly připojení: Annually, or as needed, verify that all electrical connections are tight and free from corrosion.

7. Řešení problémů

If you encounter issues with your Ranco ETC-141000-000 controller, refer to the following common troubleshooting steps:

• Bez napájení/Vypnutí displeje: Check the power supply to the controller. Ensure circuit breakers are not tripped and wiring connections are secure.
• Nesprávný údaj teploty: Verify the sensor is properly connected and positioned. Check for any physical damage to the sensor or its lead.
• Výstup se neaktivuje: Confirm the setpoint and differential settings are correct for the desired operation (heating/cooling). Check the relay status on the LCD. Ensure the load device is functioning correctly.
• Klávesnice nereaguje: Check if the keypad lockout feature is enabled. Refer to the operating instructions to disable it if necessary.
• Nepravidelné chování: Disconnect power for a few minutes and then reapply to reset the unit. If issues persist, contact Ranco technical support.

8. Technické specifikace

9. Záruka a podpora

For warranty information, technical support, or service inquiries regarding your Ranco ETC-141000-000 Digital Temperature Electronic Controller, please contact Ranco customer service or visit their official webwebu. Při kontaktování podpory mějte po ruce účtenku a číslo modelu.