Zavedení
Thank you for choosing the PELONIS 16-inch Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and troubleshooting of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan is designed to provide efficient and energy-saving cooling with its powerful motor and high-quality blades. It features three speed settings, an 85-degree wide oscillation angle, a 7-hour shut-off timer, and adjustable height and tilt for customized comfort.
Image: The PELONIS 16-inch Pedestal Fan, showcasing its sleek black design and adjustable stand.
Důležité bezpečnostní informace
Please read and follow all safety instructions to reduce the risk of fire, electric shock, or injury.
- Před čištěním nebo jakoukoli údržbou vždy odpojte ventilátor ze zásuvky.
- Do not insert fingers or foreign objects into the grille when the fan is operating.
- Ujistěte se, že ventilátor je umístěn na stabilním a rovném povrchu, aby se zabránilo jeho převrácení.
- Neprovozujte ventilátor s poškozeným kabelem nebo zástrčkou. Pro opravu se obraťte na kvalifikovaný servisní personál.
- Keep the fan away from water or excessive humidity.
- The built-in overheat protection automatically switches the fan off when the motor overheats. If this occurs, unplug the fan and allow it to cool before restarting.
Obsah balení
Před montáží se ujistěte, že jsou přítomny všechny komponenty:
- Fan Head Assembly (Motor, Blades, Front and Rear Grilles)
- Nastavitelná výška tyče
- Kulatá základna
- Dálkové ovládání (vyžaduje 2 baterie AAA, nejsou součástí balení)
- Montážní materiál (šrouby, matice, klíč)
Nastavení a montáž
Follow these steps to assemble your PELONIS Pedestal Fan:
- Step 1: Attach the Base. Place the round base on a flat surface. Insert the bottom end of the adjustable height pole into the center hole of the base. Secure it from underneath the base using the provided screw and wrench.
- Step 2: Adjust Pole Height. Loosen the height adjustment knob on the pole. Extend the inner pole to your desired height (between 3.5 to 4 feet) and tighten the knob to secure it.
- Step 3: Mount the Motor Unit. Attach the fan motor unit to the top of the adjustable height pole. Ensure it is securely fastened with the provided screw and wrench.
- Step 4: Install Rear Grille. Place the rear grille onto the motor unit, aligning the notches. Secure it with the retaining nut provided.
- Step 5: Attach Fan Blades. Slide the fan blades onto the motor shaft, ensuring they are properly seated. Secure the blades with the spinner cap, turning it counter-clockwise to tighten.
- Step 6: Install Front Grille. Attach the front grille to the rear grille, ensuring the clips snap into place around the circumference. Secure the grilles with the small screw at the bottom.
Image: A visual guide demonstrating the six steps for assembling the PELONIS Pedestal Fan, from attaching the base to securing the grilles.
Návod k obsluze
Your PELONIS Pedestal Fan can be operated using the control panel on the fan unit or the included remote control.
Funkce ovládacího panelu:
Obrázek: Detailní záběr view of the fan's control panel, showing buttons for Speed, Timer, and On/Off, along with indicator lights for speed and timer settings.
- Tlačítko ON/OFF: Stisknutím zapnete nebo vypnete ventilátor.
- Tlačítko SPEED: Press repeatedly to cycle through the three speed settings: Low, Medium, and High. Corresponding indicator lights will illuminate.
- Tlačítko TIMER: Press repeatedly to set the automatic shut-off timer for 1, 2, 4, or 7 hours. The selected timer duration will be indicated by illuminated lights.
Dálkové ovládání:
The remote control allows convenient operation from a distance. Insert 2 AAA batteries (not included) into the remote before use.
Image: The remote control for the PELONIS Pedestal Fan, featuring buttons for power, speed, and timer functions.
- The remote control mirrors the functions of the control panel: ON/OFF, SPEED, and TIMER.
- Point the remote directly at the fan's control panel for optimal response.
Oscillation and Tilt Adjustment:
The fan features an 85-degree wide oscillation angle and a 24-degree tilt adjustment to customize airflow direction.
Image: A diagram illustrating the 90-degree oscillation and 24-degree tilt adjustment capabilities of the PELONIS Pedestal Fan, showing how to customize airflow.
- Kmitání: Press the oscillation button on the fan's control panel (not available on remote) to activate or deactivate the oscillating movement.
- Nastavení sklonu: Manually adjust the fan head up or down to direct airflow as needed.
Nastavitelná výška:
The fan's height can be adjusted from 3.5 feet to 4 feet to suit various environments.
Image: A comparison showing the PELONIS Pedestal Fan at its minimum (3.5 ft) and maximum (4 ft) adjustable heights.
- To adjust height, loosen the height adjustment knob on the pole, slide the inner pole to the desired position, and then firmly tighten the knob.
Údržba
Pravidelné čištění pomáhá udržovat výkon ventilátoru a prodlužuje jeho životnost.
- Čištění ventilátoru: Před čištěním vždy odpojte ventilátor ze zásuvky. Použijte měkký,amp hadříkem k otření vnějších povrchů. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Cleaning Fan Blades and Grilles: Periodically, the front grille can be removed to clean the fan blades and the inside of the grilles. Refer to the assembly instructions for grille removal. Ensure all parts are completely dry before reassembling and operating the fan.
- Skladování: Pokud ventilátor delší dobu nepoužíváte, skladujte jej na chladném a suchém místě, nejlépe v originálním obalu.
Odstraňování problémů
Pokud narazíte na problémy s ventilátorem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ventilátor se nezapne. | Not plugged in; power outlet not working; overheat protection activated. | Ensure fan is securely plugged into a working outlet. Unplug and allow to cool for 30 minutes if overheat protection is suspected. |
| Slabé proudění vzduchu. | Fan speed too low; grilles or blades are dirty. | Increase fan speed. Clean the fan blades and grilles as per maintenance instructions. |
| Ventilátor je hlučný. | Loose parts; fan not on a level surface; dirty blades. | Check for loose screws or components. Place fan on a stable, level surface. Clean fan blades. |
| Dálkové ovládání nefunguje. | Batteries are dead or incorrectly inserted; remote not pointed at sensor. | Replace batteries (2 AAA). Ensure correct polarity. Point remote directly at the fan's control panel. |
Specifikace
- Značka: PELONIS
- Model: PFS40A4BBB
- Barva: Černý
- Konstrukce elektrického ventilátoru: podlaha Fan
- Zdroj napájení: Elektrický kabel
- Rozměry produktu: 15"H x 17.91"Š x 48.43"V
- Typ pokoje: Bedroom, Living room, Kitchen, Home Office
- Speciální vlastnosti: Timer, Adjustable height, Adjustable Tilt, Oscillating
- Doporučená použití: Ventilating, Cooling, Air Circulation
- Hladina hluku: 40 dB
Záruka a podpora
PELONIS products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official PELONIS website. If you require assistance, please contact PELONIS customer service.
Note: This manual is for informational purposes. Product specifications and features may be subject to change without notice.
