Konec produktuview
The PELONIS 16-inch pedestal fan is engineered to provide powerful and efficient cooling for medium to large rooms. It features an upgraded high-performance motor and optimized blades for strong airflow while consuming less energy. Designed for user convenience, it includes a remote control, adjustable height, and a 7-hour auto shut-off timer. Its quiet operation ensures comfort in various settings, from bedrooms to offices. The fan also incorporates a stable base and built-in overheat protection for enhanced safety and durability.
Obrázek: Přední strana view of the PELONIS 16-inch Pedestal Fan in white.
Nastavení a montáž
Follow these steps to assemble your PELONIS Pedestal Fan:
- Připevněte základnu: Secure the main pole to the weighted base using the provided screw and washer. Ensure it is firmly tightened for stability.
- Insert the Adjustable Pole: Slide the adjustable chrome pole into the main pole.
- Namontujte motorovou jednotku: Attach the fan motor unit to the top of the adjustable pole. Secure it with the locking screw.
- Nainstalujte zadní mřížku: Place the rear grille onto the motor unit, aligning the notches. Secure it with the plastic nut.
- Připevněte lopatky ventilátoru: Slide the fan blades onto the motor shaft. Ensure the blades are correctly oriented and secured with the spinner cap.
- Nainstalujte přední mřížku: Place the front grille over the blades and align it with the rear grille. Secure the two grilles together using the clips around the edge.
Image: Visual guide for fan assembly, showing steps from base attachment to grille securing.
Umístění: Position the fan on a flat, stable surface. Ensure adequate clearance around the fan for optimal airflow and oscillation. It is suitable for indoor use in living rooms, bedrooms, home offices, and dining rooms.
Návod k obsluze
Your PELONIS fan can be operated using the control panel on the unit or the included remote control.
Ovládací panel a dálkové ovládání
Image: Close-up of the fan's control panel with buttons for speed, timer, and on/off.
- Napájení (Zapnuto/Vypnuto): Press the ON/OFF button to turn the fan on or off.
- Nastavení rychlosti: Press the SPEED button repeatedly to cycle through the 3 available speed settings (Low, Medium, High).
- Kmitání: The fan features 90° wide-angle oscillation. Activate or deactivate oscillation using the dedicated button on the control panel or remote.
- Nastavení sklonu: Manually adjust the fan head's tilt to direct airflow precisely where needed. The tilt angle is approximately 24°.
- Časovač: Use the TIMER button to set the auto shut-off timer for up to 7 hours. The fan will automatically turn off after the set duration.
Image: Diagram illustrating the 90° oscillation and tilt adjustment capabilities.
Nastavitelná výška
The fan's height can be adjusted from 3.5 ft to 4 ft (42-48 inches) to suit your personal comfort needs, whether you are at a desk, on a couch, or in bed. Loosen the height adjustment knob on the pole, extend or retract the pole to the desired height, and then tighten the knob securely.
Image: Two fans demonstrating the adjustable height from 3.5 ft to 4 ft.
Údržba
Pravidelné čištění a údržba zajistí dlouhou životnost a optimální výkon vašeho ventilátoru.
- Čištění: Disconnect the fan from the power source before cleaning. The fan grilles can be unclipped for easy access to the blades. Use a soft, damp cloth to wipe down the exterior surfaces. For the blades, gently wipe them to remove dust and debris. Do Not Wash the fan or immerse it in water.
- Skladování: Pokud ventilátor delší dobu nepoužíváte, skladujte jej na chladném a suchém místě, nejlépe v originálním obalu, abyste jej chránili před prachem a poškozením.
Image: Illustration showing the fan blades being cleaned, emphasizing ease of maintenance.
Odstraňování problémů
If you encounter any issues with your PELONIS fan, please refer to the following common solutions:
- Ventilátor se nezapíná:
- Ujistěte se, že je napájecí kabel bezpečně zapojený do funkční elektrické zásuvky.
- Check if the ON/OFF button has been pressed.
- Verify that the timer function is not set to turn the fan off.
- Slabé proudění vzduchu:
- Zvyšte nastavení otáček ventilátoru.
- Ensure the fan grilles and blades are clean and free from dust buildup.
- Adjust the tilt angle and oscillation to optimize air distribution.
- Neobvyklý hluk:
- Ensure the fan is placed on a stable, flat surface to prevent vibrations.
- Check for any loose parts or obstructions within the fan grilles or around the blades.
- While the fan is designed for quiet operation, some noise is normal, especially at higher speeds (Noise Level: 50 dB).
- Dálkové ovládání nefunguje:
- Ujistěte se, že má dálkový ovladač nové baterie.
- Point the remote directly at the fan's control panel.
- Remove any obstructions between the remote and the fan.
For further assistance, please refer to the official user manual or contact PELONIS customer support.
Specifikace
| Značka | PELONIS |
| Název modelu | PFS40A4BWW |
| Barva | Bílý |
| Rozměry produktu | 15"H x 17.91"Š x 48.43"V |
| Hmotnost položky | 11.38 libry |
| Zdroj napájení | Elektrický kabel |
| Wattage | 60 wattů |
| svtage | 110 voltů |
| Úroveň hluku | 50 dB |
| Počet čepelí | 3 |
| Délka čepele | 16 palce |
| Počet úrovní výkonu | 3 |
| Speciální funkce | Remote Controlled, Timer, Adjustable Tilt, Oscillating |
| Časovač | 7-Hour Auto Shut-off |
| Úhel oscilace | 90° |
| Vnitřní/venkovní použití | Krytý |
Záruka a podpora
For detailed warranty information and customer support, please refer to the official user manual or visit the PELONIS brand store.
- Oficiální uživatelská příručka: Stáhnout PDF
- PELONIS Brand Store: Navštivte obchod
Note: Specific warranty terms and conditions may vary. Please consult the user manual or contact the manufacturer directly for the most accurate and up-to-date information.
