GoPro The Remote Instruction Manual

1. Úvod

The GoPro The Remote is an official accessory designed to provide convenient wireless control over your compatible GoPro HERO cameras. Engineered for durability and ease of use, it features Bluetooth Low Energy for optimized battery performance and a large, high-resolution display for quick status checks. Its rugged, waterproof design and tactile buttons make it suitable for various environments and activities.

Klíčové vlastnosti:

• Bluetooth Low Energy: Enhances battery life for both The Remote and the connected camera, improving pairing efficiency.
• Displej s vysokým rozlišením: A large screen allows for easy monitoring of your camera's status at a glance.
• Tactile Buttons: Large, glove-friendly buttons ensure simple control over camera functions, presets, and mode switching.
• Odolný a voděodolný: Built with a rugged design, it is wearable, mountable, and waterproof up to 16 feet (5 meters).
• Rozšířený rozsah: Operates effectively up to 196 feet (60 meters) in optimal conditions.
• Ovládání více kamer: Možnost ovládání až 5 kamer současně.
• Included Wrist Strap: Comes with a convenient wrist strap for secure attachment to your wrist, grips, handlebars, or other gear.

2. Co je v krabici

Upon unboxing your GoPro The Remote, you will find the following items:

• The Remote (Model: ARMTE-003)
• Řemínek na zápěstí
• USB-C kabel

3. Nastavení

3.1 Charging The Remote

Before initial use, ensure The Remote is fully charged. Connect the included USB-C cable to the charging port on The Remote and plug the other end into a standard USB power source. The display will indicate charging status.

3.2 Pairing with Your GoPro Camera

To establish a wireless connection between The Remote and your GoPro camera, follow these steps:

1. On Your GoPro Camera:
• Power on your GoPro camera.
• Swipe down on the rear screen to access the dashboard.
• Swipe left to enter the Connections menu.
• Select "Connect Device" and then choose "The Remote". Your camera is now in pairing mode.
2. On The Remote:
• Power on The Remote by pressing the power/mode button.
• The Remote will automatically search for nearby GoPro cameras.
• Once your GoPro camera is detected, The Remote's display will show a connection successful message.
3. Multi-Camera Pairing: The Remote can control up to 5 cameras. Repeat the pairing process for each additional camera.

4. Operating The Remote

The Remote provides intuitive control over your GoPro camera's primary functions. The large, high-resolution display mirrors key information from your camera, allowing you to monitor settings and status without directly interacting with the camera.

4.1 Zapnutí/vypnutí

• Zapnutí: Stiskněte tlačítko Tlačítko režimu/napájení (usually located on the side or bottom) once.
• Vypnutí: Stiskněte a podržte Tlačítko režimu/napájení for a few seconds until the display indicates "Power Off". This will power off both The Remote and the connected camera(s).

4.2 Changing Modes and Presets

• To Change Shooting Mode: Krátce stiskněte Tlačítko režimu/napájení. Each press will cycle through available modes (e.g., Video, Photo, Time Lapse).
• To Change Presets: Použijte vyhrazený tlačítko Nastavení (often depicted as a wrench icon) to navigate through different presets within the selected mode.

4.3 Starting/Stopping Recording or Capturing Photos

• To Start/Stop Recording (Video Mode): Press the large, red Tlačítko spouště on the front of The Remote.
• To Capture a Photo (Photo Mode): Press the large, red Tlačítko spouště on the front of The Remote.

5. Údržba

• Čištění: Wipe The Remote with a damp cloth to remove dirt or debris. Ensure the USB-C port is dry before charging.
• Skladování: Store The Remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Voděodolná péče: While waterproof, always ensure the USB-C port cover is securely closed before exposing The Remote to water.

6. Řešení problémů

6.1 Problémy s připojením

• Ujistěte se, že je Bluetooth zapnutý: Verify that Bluetooth is enabled on your GoPro camera.
• Oprava párování zařízení: If connection is lost, try re-pairing The Remote with your GoPro camera as described in the Setup section.
• Kontrolní rozsah: Ensure The Remote is within the operational range of 196 feet (60 meters) from your camera in optimal conditions. Obstructions can reduce this range.
• Rušení: Minimalizujte potenciální rušení od jiných bezdrátových zařízení.

6.2 Baterie se nenabíjí

• Zkontrolujte kabel: Ensure the USB-C cable is properly connected to both The Remote and the power source.
• Vyzkoušejte jiný zdroj napájení: Attempt charging with a different USB port or wall adapter.

7. Specifikace

8. Záruka a podpora

For warranty information and customer support, please refer to the official GoPro webwebu nebo se přímo obraťte na zákaznický servis GoPro. Uschovejte si doklad o koupi pro případné reklamace.