1. Úvod
The INKBIRDPLUS INK-IFT01 is a non-contact infrared thermometer designed for accurate surface temperature measurements across a wide range of applications. It features a 12:1 distance-to-spot ratio, adjustable emissivity, and a clear backlit LCD display for convenient use. This manual provides essential information for the safe and effective operation of your device.
Figure 1: INKBIRDPLUS INK-IFT01 Infrared Thermometer
2. Bezpečnostní informace
Před použitím zařízení si pečlivě přečtěte všechna bezpečnostní upozornění.
- This infrared thermometer is intended for measuring surface temperatures only. It is not designed for use on humans or animals, and readings obtained from such applications will be inaccurate.
- Do not attempt to measure the internal temperature of any object with this device.
- Never irradiate human eyes directly or indirectly with the laser beam at any time. Direct exposure can cause eye damage.
- Udržujte zařízení mimo dosah dětí.
- Do not use the device in environments with explosive gases, vapor, or dust.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight for prolonged periods.
3. Konec produktuview
Familiarize yourself with the main components of your INKBIRDPLUS INK-IFT01 thermometer:
Figure 2: Labeled components of the INKBIRDPLUS INK-IFT01
- Laser Hole: Vysílá zaměřovací laser.
- Infračervený senzor: Detekuje infračervené záření pro měření teploty.
- LCD obrazovka: Displays temperature readings, battery status, and other indicators.
- ℃/℉/Down Button: Used to switch between Celsius and Fahrenheit, and for navigating menus.
- Function Button (MODE): Accesses settings and modes.
- Laser/Up Button: Toggles the laser on/off and for navigating menus.
- Spoušť: Activates the measurement.
- Přihrádka na baterie: Obsahuje 9V baterii.
4. Nastavení
4.1 Instalace baterie
The INKBIRDPLUS INK-IFT01 requires one 9V 6F22 battery for operation. A new battery can provide approximately 12 months of continuous use.
- Najděte krytku přihrádky na baterie na rukojeti teploměru.
- Gently pull the cover downwards to open the compartment.
- Insert a 9V battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Zavřete kryt přihrádky na baterie, dokud bezpečně nezacvakne na místo.
Figure 3: Battery installation process
5. Provoz
5.1 Provedení měření
- Namiřte teploměr na cílový povrch.
- Press and hold the trigger to activate the laser and begin live temperature readings. The laser dot indicates the center of the measurement area.
- Release the trigger to hold the current temperature reading on the display. The reading will remain on the screen for a short period before the device automatically powers off to save energy.
Figure 4: Trigger usage for live and locked readings
5.2 Poměr vzdálenosti k bodu (D:S)
The INK-IFT01 has a Distance to Spot Ratio of 12:1. This means that at a distance of 12 units from the target, the measurement spot diameter will be 1 unit. For example, if you are 12 inches away from the target, the measurement area will be 1 inch in diameter. To ensure accurate readings, make sure the target area is larger than the spot size.
Figure 5: Understanding Distance to Spot Ratio
5.3 Přepínání teplotních jednotek (℃/℉)
To switch between Celsius (℃) and Fahrenheit (℉), press the dedicated ℃/℉/Down Button located below the LCD screen. The display will update to show the selected unit.
5.4 Nastavitelná emisivita
Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. The INK-IFT01 allows you to adjust the emissivity from 0.1 to 1.0 to improve measurement accuracy for various surfaces. To adjust emissivity, press the MODE button to enter the emissivity setting, then use the Up a Dolů tlačítka pro změnu hodnoty.
Refer to the following table for common emissivity values:
| Materiál | Emisivita |
|---|---|
| Hliník (oxidovaný) | 0.20–0.40 |
| Brass (oxidized) | 0.61 |
| Iron (oxidized) | 0.78–0.82 |
| Měď (oxidovaná) | 0.78 |
| Barva (matná) | 0.92–0.96 |
| Voda | 0.93–0.96 |
| Dřevo | 0.90–0.95 |
| Konkrétní | 0.94 |
Note: This is a partial list. For a comprehensive emissivity table, please refer to the full product manual.
5.5 Multiple Applications
The INKBIRDPLUS INK-IFT01 is suitable for various non-contact temperature measurement tasks, including:
- Cooking and BBQ (surface temperature of grills, ovens, food)
- Automotive diagnostics (engine components, tires)
- Industrial maintenance (electrical panels, machinery)
- Home inspections (HVAC, insulation, refrigerators)
Obrázek 6: Přamples of thermometer applications
6. Údržba
6.1 Čištění
- K čištění zařízení použijte měkký, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- For the lens, use a soft cloth or cotton swab with a small amount of rubbing alcohol. Allow the lens to dry completely before use.
- Zajistěte, aby se do zařízení nedostala žádná kapalina casing.
6.2 Skladování
- When not in use, store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures.
- If storing for an extended period, remove the battery to prevent leakage and damage to the device.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný displej/Zařízení se nezapíná | Slabá nebo vybitá baterie; Nesprávná instalace baterie | Replace the 9V battery; Ensure battery is inserted with correct polarity. |
| Nepřesné údaje | Incorrect emissivity setting; Distance to spot ratio too large; Lens is dirty; Device not calibrated (unlikely for user) | Adjust emissivity for the target material; Move closer to the target; Clean the lens; Contact customer support if issues persist. |
| Cannot switch between ℃/℉ | Incorrect button press; Software glitch | Ensure you are pressing the dedicated ℃/℉/Down Button. If the issue persists, try removing and reinserting the battery. |
| Laser nefunguje | Laser is turned off; Malfunction | Stiskněte tlačítko Laser/Up Button to toggle the laser. If it still doesn't work, contact customer support. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | INK-IFT01 |
| Rozsah měření | -58℉~1022℉ / -50℃~550℃ |
| Přesnost | ±2% or ±2℃ (whichever is greater) |
| Poměr vzdálenosti k bodu (D:S) | 12:1 |
| Emisivita | Nastavitelné od 0.1 do 1.0 |
| Doba odezvy | 0.5 sekund |
| Typ zobrazení | Podsvícený LCD |
| Zdroj napájení | 9V 6F22 Battery (approx. 12 months life) |
| Provozní teplota | 0 až 50℃ (32~122℉) |
| Skladovací teplota | -20 až 50 ℃ (-4~122 ℉) |
| Hmotnost položky | 190 g |
| Rozměry (cca) | 14 cm (délka) |
| Zahrnuté komponenty | INKBIRD Infrared Thermometer Gun INK-IFT01 |
9. Záruka a podpora
9.1 Informace o záruce
INKBIRDPLUS products are manufactured to high-quality standards and are warranted against manufacturing defects. Please refer to the warranty card included with your product or visit the official INKBIRD webpodrobné záruční podmínky naleznete na webu.
9.2 Zákaznická podpora
If you encounter any issues or have questions regarding your INKBIRDPLUS INK-IFT01 Infrared Thermometer, please contact our customer support team. Contact details can typically be found on the INKBIRD official webmístě nebo na obalu produktu.
Online zdroje naleznete na adrese: www.inkbird.com
