1. Úvod
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your SPIDER FARMER 6-inch Inline Duct Fan Kit with Temperature Controller. Please read this manual thoroughly before use to ensure safe and efficient operation of the product.
2. Bezpečnostní informace
Vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob, včetně následujících:
- Před použitím tohoto produktu si přečtěte všechny pokyny.
- Neprovozujte žádný ventilátor s poškozeným kabelem nebo zástrčkou. Ventilátor zlikvidujte nebo jej vraťte do autorizovaného servisního zařízení ke kontrole a/nebo opravě.
- Neveďte kabel pod koberec. Nezakrývejte kabel kluznými koberci, běhouny nebo podobnými kryty. Neveďte kabel pod nábytkem nebo spotřebiči. Kabel umístěte mimo dopravní oblast a tam, kde o něj nikdo nezakopne.
- To disconnect the fan, turn controls to the OFF position, then remove plug from outlet.
- Používejte tento ventilátor pouze tak, jak je popsáno v tomto návodu. Jakékoli jiné použití, které není doporučeno výrobcem, může způsobit požár, úraz elektrickým proudem nebo zranění osob.
- Před čištěním nebo servisem vždy odpojte ventilátor ze zásuvky.
- Ujistěte se, že napájecí zdroj odpovídá objtage požadavky uvedené na štítku výrobku.
3. Obsah balení
Ověřte, zda jsou všechny komponenty přítomny a v dobrém stavu:
- 1 x 6-inch Inline Duct Fan
- 1 x Smart Temperature and Humidity Controller
- 1 x Carbon Filter
- 1 x Flexible Ducting (8m)
- 2 x Duct Clamps
- 1 x Pre-filter for Carbon Filter
- 1 x Napájecí kabel
- 1 x RJ12 Fan to Controller Cord
Obrázek 3.1: Přesview of the kit components.
4. Nastavení
4.1 Connecting the Fan and Controller
The inline duct fan and smart controller are designed for simple and smart connection. The controller is powered by the inline fan via the RJ12 port, eliminating the need for an external power supply for the controller.
- Connect the power cord to the inline duct fan.
- Connect the RJ12 fan to controller cord from the inline fan to the RJ12 port on the smart controller.
- Plug the fan's power cord into a suitable electrical outlet. The controller will power on automatically.
Figure 4.1: Simple and smart connection of the fan and controller.
4.2 Installing the Carbon Filter and Ducting
The carbon filter is essential for odor control. The flexible ducting allows for versatile placement.
- Attach the carbon filter to one end of the inline duct fan. Ensure a tight seal to prevent air leaks. Use a duct clamp abyste to zajistili.
- Attach the flexible ducting to the other end of the inline duct fan. Secure it with another duct clamp.
- Position the entire assembly within your grow tent or desired ventilation area. The fan and filter can be hung using ropes or straps (not included) to optimize space and airflow.
Figure 4.2: Premium Carbon Filter design.
Figure 4.3: Energy Efficient EC Motor and airflow.
4.3 Umístění snímače
The 3-in-1 sensor (temperature, humidity, light) provides crucial environmental data to the controller. Proper placement ensures accurate readings.
- Place the sensor in the center of your grow area, away from direct light sources or heat/cold drafts that could skew readings.
- Ensure the sensor is not obstructed by plants or other equipment.
Figure 4.4: High-Precision 3-in-1 Sensor.
4.4 Instalační videa
The following videos demonstrate the installation process for the inline duct fan and carbon filter kit:
Video 4.1: Installation guide for a carbon filter kit in a hydroponic setup. This video demonstrates connecting the carbon filter to the fan and securing it with clamps, then installing the assembly into a grow tent.
Video 4.2: Demonstration of installing an air extractor with a carbon filter and exhaust pipe. This video shows the process of assembling the ventilation system components and mounting them.
Video 4.3: Guide for installing an air extractor fan with a controller. This video illustrates the steps to set up the fan and connect it to the control unit.
5. Návod k obsluze
5.1 Překročení ovladačeview
The smart controller features multiple operating modes and 10 fan speeds, allowing for precise environmental control.
Figure 5.1: GGS Controller interface and navigation.
5.2 Nastavení teploty a vlhkosti
The controller automatically adjusts fan speed based on your set temperature and humidity targets.
- Use the rotary knob to navigate through the menu options on the controller's display.
- Select the temperature setting and adjust to your desired value.
- Select the humidity setting and adjust to your desired value.
- The fan will automatically increase or decrease speed to maintain these set points.
5.3 Scheduling and Automatic Control
Program the fan to operate at specific times and speeds.
- Access the scheduling menu on the controller.
- Set start and end times for operation.
- Define the desired operation speed and standby speed for the scheduled period.
- Save your settings. The fan will follow the programmed schedule.
Figure 5.2: Scheduling and automatic control interface.
5.4 Dálkové ovládání aplikací
Control your ventilation system remotely via a mobile application (if supported by your controller model).
- Download the official SPIDER FARMER app from your device's app store.
- Follow the in-app instructions to pair your controller with the app.
- Once connected, you can adjust fan speed, set timers, and monitor environmental conditions from your smartphone.
Obrázek 5.3: Rozhraní pro vzdálené ovládání pomocí aplikace.
6. Údržba
6.1 Údržba uhlíkového filtru
The carbon filter's effectiveness depends on regular maintenance.
- Předfiltr: The pre-filter should be cleaned regularly (every 2-4 weeks, depending on usage) to prevent clogging and maintain airflow. Remove the pre-filter, gently wash it with warm water and mild detergent, rinse thoroughly, and allow it to air dry completely before reattaching.
- uhlíkový filtr: The activated carbon inside the filter has a limited lifespan. Replace the carbon filter every 6-12 months, or sooner if odors persist, to ensure optimal odor removal.
6.2 Čištění ventilátoru
Periodically inspect and clean the fan blades and housing.
- Odpojit napájení: Před čištěním vždy odpojte ventilátor ze zásuvky.
- Čisté čepele: Use a soft brush or cloth to gently remove any dust or debris from the fan blades. Avoid using harsh chemicals or abrasive materials.
- Bydlení: Wipe down the exterior of the fan housing with a damp cloth. Ensure no moisture enters the motor or electrical components.
7. Řešení problémů
Běžné problémy a jejich řešení naleznete v následující tabulce:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ventilátor se nezapíná | No power; loose connection; faulty controller | Check power outlet; ensure all cables are securely connected; test controller functionality. |
| Špatné proudění vzduchu | Clogged filter; obstructed ducting; fan speed too low | Clean or replace pre-filter; check ducting for kinks or blockages; increase fan speed on controller. |
| Trvalé pachy | Saturated carbon filter; air leaks in system | Replace carbon filter; check all connections for airtight seals. |
| Nepřesné údaje senzorů | Improper sensor placement; sensor dirty | Relocate sensor away from direct heat/light/drafts; gently clean sensor. |
| Ovladač nereaguje | Loose RJ12 cable; power issue | Ensure RJ12 cable is firmly connected; verify fan is receiving power. |
8. Specifikace
Technical specifications for the SPIDER FARMER 6-inch Inline Duct Fan Kit:
| Funkce | Specifikace |
|---|---|
| Velikost potrubí | 6 palce / 150 mm |
| Proudění vzduchu | Až 402 XNUMX CFM |
| Moc | 65W ± 5% |
| Úroveň hluku | 32 dB(A) |
| Rychlost ventilátoru | 3000 ot./min |
| svtage | AC 110-240V |
| Typ motoru | EC motor |
| Typ ovladače | Inteligentní regulátor teploty a vlhkosti |
| Ducting Length (fully stretched) | 8 metrů |
| Materiály | Plastic, Stainless Steel, Aluminum, Steel Alloy |
Obrázek 8.1: Specifikace a rozměry produktu.
9. Záruka a podpora
SPIDER FARMER products are designed for quality and reliability. For warranty information, please refer to the warranty card included with your product or visit the official SPIDER FARMER website. If you encounter any issues or have questions regarding your product, please contact SPIDER FARMER customer support through the contact information provided on our website or your purchase platform. Our team is available to assist you with technical support and troubleshooting.
