Zavedení
This manual provides essential information for the assembly, proper use, maintenance, and troubleshooting of your new tectake 800866 Padded Velvet Effect Chairs. Please read this manual carefully before assembly and use to ensure safe and optimal performance of your chairs. These chairs are designed for versatile use in various indoor settings such as kitchens, dining rooms, or offices, offering both comfort and a stylish aesthetic.
Obsah balení
Before beginning assembly, please verify that all components are present and undamaged. The package should contain:
- 4 x Chair Seats (Padded Velvet Effect)
- 4 x Sets of Chair Legs (Steel, Black Finish)
- Necessary Assembly Hardware (screws, washers, Allen key)
Image: A complete set of four tectake 800866 chairs, as received in the package.
Nastavení a montáž
Assembly of the tectake 800866 chairs is straightforward and requires minimal tools. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching the floor or the chair components.
- Rozbalte komponenty: Carefully remove all chair components and hardware from the packaging. Lay them out to ensure all parts are accounted for.
- Připevnění nohou k sedáku: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Insert the provided screws and washers.
- Hand-Tighten Screws: Initially, hand-tighten all screws to allow for minor adjustments. Do not fully tighten yet.
- Adjust and Fully Tighten: Once all screws are in place, gently place the chair upright on a flat surface. Apply slight pressure to ensure the chair is level, then fully tighten all screws using the provided Allen key. Ensure all connections are secure.
- Kontrola stability: Before use, gently rock the chair to ensure it is stable and does not wobble. If wobbling occurs, loosen the screws slightly, adjust, and re-tighten.
Image: A diagram illustrating the key dimensions of the tectake 800866 chair, useful for understanding its structure during assembly.
Návod k obsluze
The tectake 800866 chairs are designed for comfortable seating in various indoor environments. To ensure longevity and safety, please adhere to the following guidelines:
- Zamýšlené použití: These chairs are intended for indoor use only. Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the velvet fabric and frame.
- Nosnost: The maximum load capacity for each chair is 120 kg (přibližně 264 liber). Do not exceed this weight limit to prevent damage or injury.
- Správné sezení: Always sit centrally on the chair. Avoid standing on the chair or using it as a step stool.
- Ochrana podlahy: The chairs are equipped with plastic caps on the feet to protect your flooring. Ensure these caps are intact and clean to prevent scratches.
Image: tectake 800866 chairs in a dining room setting, illustrating their intended use.
Údržba a péče
Regular maintenance will help preserve the appearance and extend the lifespan of your tectake 800866 chairs.
- Fabric Care (Velvet Effect):
- For general cleaning, gently vacuum the fabric using an upholstery attachment to remove dust and loose debris.
- For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain and damage the velvet pile.
- For stubborn stains, a mild fabric cleaner designed for velvet or upholstery can be used. Test on an inconspicuous area first. Follow the cleaner's instructions carefully.
- Vyhněte se používání agresivních chemikálií, abrazivních čisticích prostředků nebo nadměrné vlhkosti.
- Frame Care (Steel Legs):
- Wipe the steel legs with a soft, damp cloth. Dry immediately to prevent water spots.
- Vyhněte se abrazivním čisticím prostředkům nebo drátěnkám, které by mohly poškrábat povrch.
- Plastové uzávěry: Periodically check the plastic caps on the feet for wear or damage. Replace if necessary to continue protecting your floors.
- Kontrola hardwaru: Every few months, check all screws and connections to ensure they remain tight. Re-tighten if loose.
Obrázek: Podrobný view of the chair's velvet effect upholstery, highlighting the material for care instructions.
Odstraňování problémů
Zde jsou některé běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Židle se po sestavení kymácí. | Screws not tightened evenly or fully. Uneven floor surface. | Loosen all leg screws slightly, place the chair on a flat surface, apply gentle downward pressure, then re-tighten all screws firmly and evenly. Ensure the floor is level. |
| Scratches on floor. | Damaged or missing plastic caps on chair feet. Debris stuck to caps. | Inspect plastic caps. Clean any debris. Replace damaged or missing caps. |
| Fabric appears matted or discolored. | Accumulated dust/dirt. Improper cleaning. Prolonged direct sunlight exposure. | Gently vacuum the fabric. Follow recommended cleaning instructions. Avoid direct sunlight. |
| Vrzavý zvuk během používání. | Volné spoje v rámu. | Check and re-tighten all assembly screws. |
Specifikace
| Funkce | Detail |
|---|---|
| Značka | tectake |
| Název modelu | tectake 800866 |
| Barva | Brown-black |
| Rozměry výrobku (Š x H x V) | Approx. 58 cm x 62 cm x 82 cm (22.83"W x 24.41"D x 32.28"H) |
| Plocha sedadla (Š x H) | Approx. 40 cm x 42 cm (15.75"W x 16.54"D) |
| Výška sedu | Přibl. 47 cm (18.5 palců) |
| Výška opěradla | Přibl. 40 cm (15.75 palců) |
| Height of Armrests from Ground | Přibližně 63 - 66 cm (24.8 - 26 palce) |
| Vzdálenost mezi područkami | Přibl. 47 cm (18.5 palců) |
| Maximální nosnost | 120 kg (264 lb) |
| Hmotnost položky (na židli) | Přibl. 5.9 kg (13 lb) |
| Material (Coating) | 100% Polyester (Velvet Effect) |
| Materiál (Výplň) | Polyuretan |
| Materiál (nožičky) | Ocel |
| Zahrnuté komponenty | 4 židle |
| Vnitřní/venkovní použití | Krytý |
Záruka a podpora
For any questions, concerns, or support regarding your tectake 800866 Padded Velvet Effect Chairs, please contact tectake customer service. While specific warranty details are not provided in this manual, tectake stands behind the quality of its products.
For further assistance, please visit the official tectake store or contact their customer support channels. You can often find support information on the brand's official webwebu nebo prostřednictvím prodejce, u kterého byl produkt zakoupen.
Internetový obchod: Navštivte obchod Tectake na Amazonu
