MAXXMEE Professional Pore Cleaner

1. Úvod

Thank you for choosing the MAXXMEE Professional Pore Cleaner. This device utilizes advanced vacuum technology to gently and effectively cleanse pores, remove blackheads, and exfoliate dead skin cells. With its three intensity levels and six specialized attachments, it is designed for various skin types and facial areas. Please read this manual carefully before first use to ensure safe and optimal operation.

Bezpečnostní pokyny

• Do not use on irritated, damaged, or inflamed skin.
• Nepoužívejte na místa s kožními problémy, jako je ekzém, lupénka nebo těžké akné.
• Consult a dermatologist if you have sensitive skin or pre-existing skin conditions.
• Uchovávejte mimo dosah dětí.
• Neponořujte zařízení do vody.
• Používejte pouze dodaný nabíjecí kabel.

2. Konec produktuview & Obsah balení

The MAXXMEE Professional Pore Cleaner comes with several components designed for comprehensive skin care.

Image: The MAXXMEE Professional Pore Cleaner device, USB charging cable, and six interchangeable tips.

Obsah balení:

• MAXXMEE Professional Pore Cleaner Device
• USB nabíjecí kabel
• 6 Interchangeable Suction Tips:
  • 1 Diamond Microdermabrasion Tip
  • 5 Standard Suction Tips (various sizes and shapes for different areas)
• Uživatelská příručka (tento dokument)

Image: Key features: Cordless design, 6 attachments, and 3 intensity levels.

3. Nastavení

Nabíjení zařízení

1. Připojte nabíjecí kabel USB k nabíjecímu portu na zařízení.
2. Zapojte druhý konec kabelu USB do vhodného napájecího adaptéru USB (není součástí balení) nebo do portu USB počítače.
3. LED displej bude indikovat stav nabíjení. Před prvním použitím se ujistěte, že je zařízení plně nabité.

Attaching/Changing Tips

1. Ensure the device is turned off before attaching or removing tips.
2. Gently twist and pull to remove the current tip.
3. Select the desired tip and align it with the device's nozzle.
4. Push the tip firmly onto the nozzle until it clicks into place.

4. Návod k obsluze

Obecné kroky použití

1. Příprava: Cleanse the treatment area with lukewarm water and soap to open pores. Dry the area thoroughly.
2. Výběr hrotu: Select the appropriate tip based on the area to be treated and your skin's needs.
3. Zapnutí: Press and hold the power button to turn on the device. The LED display will illuminate.
4. Nastavení intenzity: Press the power button repeatedly to cycle through the 3 intensity levels (low, medium, high). Start with the lowest intensity and gradually increase as comfortable.
5. Aplikace: Place the tip flat against your skin. Maintain light, constant pressure and move the device slowly across the skin. Do not hold the device in one spot for more than 2-3 seconds to avoid bruising.
6. Trvání: Do not use the device for more than 5 minutes per facial area.
7. Po ošetření: Rinse the treated area with cool water to close pores and dry thoroughly. Apply a moisturizing cream.
8. Vypnout: Stisknutím a podržením tlačítka napájení vypněte zařízení.

Image: Guide to selecting the correct tip for various facial areas and skin types.

Using the Suction Tips for Pore Cleansing

The various suction tips are designed to target different pore sizes and facial contours. Move the device in a continuous, gliding motion. Avoid back-and-forth scrubbing.

Image: Visual representation of the vacuum technology extracting impurities from a pore.

Using the Diamond Microdermabrasion Tip

The diamond microdermabrasion tip is designed to gently exfoliate dead skin cells, promoting natural skin regeneration and a smoother complexion. Use this tip sparingly, typically once a week, and always start with the lowest intensity.

Image: The diamond microdermabrasion tip in action, gently exfoliating the skin surface.

Důležitá poznámka: If skin irritation, redness, or discomfort occurs, discontinue use immediately. If blemishes persist or worsen, consult a dermatologist.

5. Údržba

Cleaning the Device and Tips

1. Always turn off the device and disconnect it from the charger before cleaning.
2. Remove the used tip from the device.
3. Wash the tips with warm, soapy water. Rinse thoroughly and allow them to air dry completely before storing or reattaching.
4. Otřete hlavní část zařízení měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky ani neponořujte zařízení do vody.

Skladování

Store the device and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Keep all components together to prevent loss.

6. Řešení problémů

• Zařízení se nezapne: Ensure the device is fully charged. If the issue persists, try using a different USB charging port or adapter.
• Slabé sání: Check if the tip is securely attached. Ensure the tip is clean and free from debris. Make sure the skin is clean and dry for optimal suction.
• Skin redness/bruising: This can occur if the suction intensity is too high or if the device is held in one spot for too long. Reduce intensity and keep the device moving. If redness persists, discontinue use.
• Tips not attaching securely: Ensure the tips are clean and dry. Align them correctly and push firmly until they click into place.

If you encounter any issues not listed here, please refer to the warranty and support section for assistance.

7. Specifikace

8. Záruka a podpora

For warranty information or technical support, please refer to the product packaging or contact the retailer where you purchased the MAXXMEE Professional Pore Cleaner. Keep your proof of purchase for any warranty claims.