1. Úvod
Thank you for choosing the AmmToo LED Motion Sensor Night Light. This manual provides essential information for the safe and efficient use of your new night lights. Designed for convenience and energy efficiency, these lights offer warm white illumination and automatic activation based on motion detection in low-light conditions.
2. Vlastnosti produktu
- Teplé bílé osvětlení: Provides a soft, non-glaring light (3200K - 2800K) for comfortable visibility in the dark.
- PIR Motion Sensor: Automatically detects movement within a 3-meter range and 120-degree angle.
- Automatické zapnutí/vypnutí: Lights turn on when motion is detected in darkness and turn off after 30 seconds of no movement.
- Světelný senzor: Ensures the light only activates in dark conditions, saving energy during the day.
- Energeticky účinný: Low power consumption of 0.5W, powered by 3 AAA batteries (not included).
- Dlouhá životnost: LED lifespan of up to 50,000 hours.
- Kompaktní a přenosný design: Slim and lightweight, suitable for various indoor locations.
- Snadná instalace: Mounts easily with double-sided adhesive tape, no tools required.
3. Obsah balení
The AmmToo LED Motion Sensor Night Light package includes:
- 4 x AmmToo LED Motion Sensor Night Lights
- 4 x oboustranné lepicí podložky
- 1 x Uživatelská příručka (tento dokument)
Image: Four AmmToo LED Motion Sensor Night Lights, showing the compact design and integrated motion sensor.
Image: The complete package contents, including four night lights, adhesive mounting pads, and the instruction manual.
4. Nastavení a instalace
Follow these steps to set up and install your AmmToo LED Motion Sensor Night Light:
- Vložte baterie:
- Gently slide the back cover of the night light to open it.
- Insert 3 AAA batteries (not included) into the battery compartment, ensuring correct polarity (+/-).
- Bezpečně zavřete zadní kryt.
Image: A visual guide demonstrating how to open the back cover, insert 3 AAA batteries, apply the adhesive, and mount the light.
- Vyberte místo instalace:
- Select a smooth, clean, and dry surface for mounting.
- Consider areas where you need light in the dark, such as hallways, staircases, bathrooms, bedrooms, or inside cabinets.
- Attach Adhesive Pad:
- Peel off one side of the double-sided adhesive pad.
- Firmly attach it to the back of the night light.
Image: A hand applying the circular 3M adhesive pad to the back of the night light, preparing it for mounting.
- Upevněte světlo:
- Peel off the other side of the adhesive pad.
- Press the night light firmly onto the chosen surface for at least 30 seconds to ensure a strong bond.
No screws or tools are required for installation.
5. Návod k obsluze
The AmmToo LED Motion Sensor Night Light operates automatically:
- Automatická aktivace: The built-in light sensor detects ambient light levels. The motion sensor will only become active when the environment is dark.
- Detekce pohybu: When motion is detected within a 3-meter (10 feet) range and a 120-degree angle in a dark environment, the night light will automatically turn on.
- Automatická deaktivace: If no further motion is detected for approximately 30 seconds, the night light will automatically turn off to conserve battery life.
Image: A diagram illustrating the automatic illumination feature, showing the light activating only in darkness upon motion detection and turning off after 30 seconds.
Image: A three-panel image demonstrating the light sensor preventing activation in daylight, auto-on by motion sensor in darkness, and auto-off after 20 seconds of no motion.
6. Údržba
- Výměna baterie: When the light dims or stops functioning, it's time to replace the batteries. Open the back cover, remove the old AAA batteries, and insert new ones, observing polarity.
- Čištění: Wipe the surface of the night light with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Skladování: If storing the night lights for an extended period, remove the batteries to prevent leakage.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. |
|
|
| Světlo svítí neustále. |
|
|
| Motion detection is inconsistent. |
|
|
| Lepidlo nedrží. |
|
|
8. Specifikace
| Značka: | AmmToo |
| Číslo modelu: | ZN01 |
| Rozměry (D x Š x V): | 6.4 x 4.4 x 2.7 cm (2.52 x 1.73 x 1.06 palce) |
| Hmotnost: | 120 g (per light) |
| Zdroj napájení: | 3 x AAA baterie (nejsou součástí balení) |
| Spotřeba energie: | 0.5 W |
| Barva světla: | Warm White (3200K - 2800K) |
| Typ senzoru: | PIR Motion Sensor, Light Sensor |
| Rozsah detekce: | Až 3 metrů (10 stop) |
| Detekční úhel: | 120 stupňů |
| Auto-off Time: | Approx. 30 seconds after last motion detected |
| Životnost: | Až 50,000 hodin |
| Materiál: | Akrylonitrilbutadienstyren (ABS) |
| Typ instalace: | Nástěnný držák (lepicí) |
9. Záruka a podpora
Specific warranty information is not provided in the product details. For any product inquiries, technical support, or warranty claims, please refer to the retailer or contact AmmToo customer service through their official channels.
Please retain your purchase receipt for any warranty-related issues.
