1. Konec produktuview
The Peplink UBR LTE is a robust dual-cellular LTE router designed to provide an all-in-one WAN solution for various deployments, including industrial and mobile applications. It features multiple connectivity options and supports Peplink's SpeedFusion SD-WAN bonding technology for reliable and unbreakable internet access.
Klíčové vlastnosti:
- 1x Gigabit Ethernet (GE) WAN port
- 4x Gigabit Ethernet (GE) LAN ports
- 2x LTE cellular modems for dual-cellular connectivity
- Router throughput: 120 Mbps
- Downlink/Uplink datarate: 150Mbps/50Mbps
- Wi-Fi standards: 2.4GHz (802.11b/g/n) or 5GHz (802.11a/n)
- Antenna connectors: 4x SMA cellular, 2x Wi-Fi, 1x SMA GPS
- Provozní teplota: -40°F až 149°F (-40°C až 65°C)
- Supports SpeedFusion WAN SMOOTHING (requires PrimeCare Subscription)
2. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- 1 x Peplink UBR LTE device
- 1 x 12V2A napájecí zdroj
- 2x Wi-Fi anténa
- 4 x 4G LTE Antennas
- 1x GPS anténa
- 1 x 4-pin Terminal Block Connector
- 1 x Rubber Foot Pad Set
Figure 1: Peplink UBR LTE Package Contents
3. Průvodce nastavením
3.1. Instalace SIM karty
The UBR LTE uses 2FF (Full-Size) SIM cards. It features redundant SIM slots for each cellular modem, allowing for failover or use with multiple carriers.
- Locate the Cellular SIM slots on the side of the device.
- Align the notch of your SIM card with the notch on the SIM icon.
- Insert the SIM card into the slot until it clicks into place.
- For optimal performance with T-Mobile Band 71, insert the T-Mobile SIM into Cellular Slot 2.
Obrázek 2: Instalace SIM karty
3.2. Připojení antény
Connect the provided antennas to their respective ports on the router. The Wi-Fi antennas are slightly larger than the cellular antennas.
- Connect the 2 Wi-Fi antennas to the 'Wi-Fi A' and 'Wi-Fi B' ports.
- Connect the 4 cellular antennas to the 'Cellular 1 Main', 'Cellular 1 Aux', 'Cellular 2 Main', and 'Cellular 2 Aux' ports.
- Connect the GPS antenna to the 'GPS' port.
Figure 3: Antenna Connections
3.3. Připojení napájení
Connect the 12V2A power supply to the DC IN port. Alternatively, for industrial or vehicle applications, use the 4-pin terminal block connector for 12-28V DC power input.
Figure 4: Power Terminal Block and SIM Slots
3.4. Initial Configuration (Video Guide)
For a visual guide on unboxing, connecting components, and initial setup, refer to the official Peplink UBR LTE Overview and Setup video:
Video 1: Peplink UBR LTE Overview and Setup. This video demonstrates the unboxing, component identification, and basic physical setup of the UBR LTE router, including antenna and power connections.
4. Návod k obsluze
4.1. Připojení k síti
The UBR LTE offers flexible WAN connectivity options:
- Ethernet WAN: Connect your primary internet source (e.g., DSL, Cable modem) to the GE WAN port.
- Cellular LTE: Utilize the dual LTE modems with installed SIM cards for cellular internet access.
- LAN porty: Connect local network devices to the 4 GE LAN ports.
4.2. SpeedFusion SD-WAN
The UBR LTE supports Peplink's SpeedFusion SD-WAN technology, which can combine multiple WAN links (Ethernet, Cellular) for increased bandwidth, reliability, and seamless failover. This feature requires an active PrimeCare subscription.
4.3. Web Administration Interface
Přístup k routeru web administration interface via a connected device to configure network settings, monitor status, and manage features. The default IP address is typically 192.168.50.1. Refer to the device's quick start guide for initial login credentials.
Figure 5: SpeedFusion Technology
Figure 6: InControl Network Management
5. Údržba
To ensure optimal performance and longevity of your Peplink UBR LTE router, follow these maintenance guidelines:
- Aktualizace firmwaru: Regularly check for and install the latest firmware updates from the Peplink website or via the InControl cloud management platform. Updates often include performance improvements, security patches, and new features.
- Fyzická kontrola: Periodically inspect all cable and antenna connections to ensure they are secure and free from damage.
- Větrání: Ensure the router is placed in a location with adequate airflow to prevent overheating. Do not block ventilation openings.
- Čištění: Keep the device clean and free of dust. Use a soft, dry cloth for cleaning.
6. Řešení problémů
6.1. Cellular Connection Issues (Obtaining IP Address)
If your AT&T SIM card (especially newer white and blue 5G SIMs) is stuck on "Obtaining IP Address" in the web administration interface, you may need to manually configure the Access Point Name (APN).
- Navigate to the WAN Connection Status section in the web administrační rozhraní.
- Click 'Details' next to the problematic Cellular WAN connection.
- Scroll down to 'Cellular Settings' and locate 'Operator Settings'.
- Change the setting from 'Auto' to 'Custom'.
- In the 'APN' field, enter
broadband. - Click 'Save and Apply'. The connection should now establish.
6.2. Obecné problémy s připojením
- Zkontrolujte fyzické připojení: Ensure all Ethernet cables, power cables, and antennas are securely connected.
- Verify SIM Card Activation: Confirm that your cellular SIM cards are active with your service provider.
- Umístění antény: Ensure antennas are positioned for optimal signal reception.
- Restartovat zařízení: Power cycle the router by disconnecting and reconnecting the power supply.
6.3. Work From Home Connectivity (Video Guide)
This video illustrates how the UBR LTE can provide seamless failover between home Ethernet and cellular connections, ensuring uninterrupted remote work:
Video 2: Work From Home Case Study_UBR_LTE. This video demonstrates the UBR LTE's capability to maintain internet connectivity through automatic failover between wired and cellular WAN sources, crucial for remote work environments.
7. Specifikace
| Funkce | Popis |
|---|---|
| Rozměry produktu | 5.1 x 4.3 x 1.6 palce |
| Hmotnost položky | 1.19 libry |
| Název modelu | UBR-LTE-US-T-PRM |
| Propustnost routeru | 120 Mbps |
| Downlink/Uplink Datarate | 150 Mbps / 50 Mbps |
| Wi-Fi standard | 2.4GHz: 802.11b/g/n OR 5GHz: 802.11a/n |
| Anténní konektory | 4x SMA cellular, 2x Wi-Fi, 1x SMA GPS |
| Provozní teplota | -40 °F – 149 °F / -40 °C – 65 °C |
| 4G Bands (Cellular 1) | B2, B4, B5, B12, B13, B25, B26 |
| 4G Bands (Cellular 2) | B12, B14, B4, B2, B5, B13, B66, B71 |
| 3G Bands (Cellular 1) | WCDMA/HSPA+/DC-HSPA+: B2, B4, B5 |
| 3G Bands (Cellular 2) | B2, B4, B5 |
| SpeedFusion Bonding Throughput | 20Mbps (Encrypted), 40Mbps (Un-Encrypted) |
| Speciální funkce | QoS, WPS |
| Třída frekvenčního pásma | Dvoupásmový |
| Technologie připojení | LAN, WAN, Wi-Fi |
| Typ antény | Opraveno |
8. Informace o záruce
The Peplink UBR LTE includes a complimentary 1-year PrimeCare warranty. PrimeCare provides access to SpeedFusion features and hardware support.
Figure 7: PrimeCare Warranty Included
9. Podpora
For further assistance, technical support, or warranty claims, please contact Peplink customer support through their official channels. Refer to the Peplink webweb, kde najdete nejaktuálnější kontaktní informace na podporu.
Figure 8: Hardware Support
