Jetson Highlight 2-Wheel Light-Up Kick Scooter User Manual

1. Úvod

This manual provides essential information for the safe assembly, operation, and maintenance of your Jetson Highlight 2-Wheel Light-Up Kick Scooter. Please read this manual thoroughly before use and retain it for future reference. This scooter is designed for recreational use by children aged 6 and up, with a maximum weight limit of 165 pounds.

2. Bezpečnostní informace

Always prioritize safety when operating the scooter. Failure to follow safety guidelines can result in serious injury.

• Vždy používejte helmu a vhodné bezpečnostní vybavení, včetně chráničů kolen a loktů.
• Zajistěte všechny třampa upevňovací prvky jsou před každou jízdou bezpečně utaženy.
• Ride on smooth, paved surfaces away from traffic. Avoid uneven terrain, loose debris, and wet conditions.
• Do not ride at night or in low-light conditions without adequate visibility. The scooter's lights enhance visibility but are not a substitute for proper lighting.
• Dodržujte bezpečnou vzdálenost od ostatních jezdců a chodců.
• Pro mladší jezdce se doporučuje dohled dospělé osoby.
• Do not attempt stunts or tricks that exceed your skill level.

3. Nastavení a montáž

The Jetson Highlight scooter requires partial assembly. Follow these steps to prepare your scooter for use.

3.1 Rozložení koloběžky

To unfold the scooter, locate the folding mechanism near the base of the handlebar stem. Release the latch and carefully unfold the stem until it locks securely into place. Ensure the mechanism is fully engaged before riding.

Image: The folding mechanism, showing how the scooter can be made compact for storage or transport.

3.2 Nastavení výšky řídítek

The handlebar height is adjustable to accommodate different rider heights. Loosen the clamp on the handlebar stem, adjust the handlebar to the desired height, ensuring the safety pin clicks into one of the adjustment holes. Then, securely tighten the clamp. The handlebar should be at hip level for optimal control.

Image: The adjustable handlebar stem, illustrating the mechanism for setting the correct height for the rider.

4. Ovládání koloběžky

Once assembled and adjusted, your Jetson Highlight scooter is ready for use.

4.1 Technika jízdy

Place one foot firmly on the deck of the scooter. Use your other foot to push off the ground, generating momentum. Once moving, place both feet on the deck, one behind the other, and maintain balance. To turn, gently lean in the desired direction and steer the handlebars.

Obrázek: Vedlejší profesionálfile of the scooter, demonstrating its structure for riding.

4.2 Aktivace LED světel

The Jetson Highlight scooter features motion-activated LED lights on the wheels and deck. No batteries are required. The lights will illuminate automatically when the scooter is in motion, providing enhanced visibility and a dynamic visual effect.

Image: The front wheel of the scooter, showing the integrated LED lights in action.

Image: The scooter's deck, highlighting the LED light strips that activate with motion.

4.3 Brzdění

To slow down or stop, apply pressure to the rear foot brake located above the rear wheel. Press down firmly with your heel. Practice braking at low speeds to become familiar with its response.

Image: The rear of the scooter, illustrating the position of the foot brake for stopping.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho skútru.

• Čištění: Otřete skútr reklamouamp Po každém použití očistěte hadříkem, abyste odstranili nečistoty a usazeniny. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Kontrola kol: Periodically check the wheels for wear and tear. Ensure they spin freely and are free from cracks or damage.
• Kontrola upevňovacích prvků: Pravidelně kontrolujte všechny šrouby, matice a uzávěry.ampUjistěte se, že jsou pevně utažené. Utáhněte všechny uvolněné upevňovací prvky.
• Skladování: When not in use, store the scooter in a dry, cool place away from direct sunlight and moisture. The easy-folding mechanism allows for compact storage.
  

  Image: The scooter folded, ready for compact storage or transport.

6. Řešení problémů

Pokud narazíte na problémy se skútrem, řiďte se následujícími běžnými tipy pro řešení problémů:

• Světla nesvítí: Ensure the scooter is in motion. The LED lights are motion-activated and do not require batteries. If the scooter is moving and lights are still off, check for any obstructions or damage to the wheel or deck light mechanisms.
• Řídítka se zdají být uvolněná: Check the handlebar clamp and ensure it is securely tightened. If the handlebar still feels loose, verify that the safety pin is fully engaged in one of the adjustment holes.
• Folding Mechanism Stuck: Ensure no debris is obstructing the folding mechanism. Apply gentle pressure while releasing západku. Netlačte na mechanismus silou.

7. Specifikace

8. Záruka

The Jetson Highlight 2-Wheel Light-Up Kick Scooter comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the manufacturer's official webwebu nebo se přímo obraťte na jejich zákaznickou podporu.

9. Podpora

For further assistance, technical support, or to purchase replacement parts, please visit the official Jetson webnebo kontaktujte jejich oddělení zákaznických služeb. Můžete také navštívit Obchod Jetson na Amazonu pro informace o produktech a příslušenství.