Uživatelská příručka k moderní kulaté vodní fontáně s texturou kamene Xbrand

Zavedení

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Xbrand Modern Stone Textured Round Sphere Water Fountain. Designed for both indoor and outdoor use, this fountain features a modern stone textured finish and integrated LED lights to enhance any space with a tranquil ambiance.

Mezi klíčové vlastnosti patří:

• Stone Textured Design: A modern aesthetic with a durable fiber stone construction.
• Integrovaná LED světla: Enhances visual appeal, especially in low-light conditions.
• Relaxing Water Sounds: Creates a soothing atmosphere with continuous water flow.
• Automatické vypínání čerpadla: Features a safety sensor that automatically shuts off the pump if the temperature reaches 185°F (85°C) to prevent damage.
• Všestranné umístění: Suitable for gardens, patios, porches, decks, or indoor spaces.

Figure 1: The Xbrand Modern Stone Textured Round Sphere Water Fountain in an outdoor environment.

Pokyny pro nastavení

1. Rozbalení: Opatrně vyjměte všechny součásti z obalu. Zkontrolujte, zda nejsou poškozené. Uschovejte obal pro budoucí skladování nebo přepravu.
2. Umístění: Choose a level surface for the fountain, ensuring it is stable and can support the fountain's weight when filled with water. Consider proximity to a power outlet and potential splashing.
3. Shromáždění:
   • Connect the pump to the water tube located inside the fountain. Ensure a secure connection to prevent leaks.
   • Place the sphere component onto the base, aligning it properly so the water tube extends into the sphere's opening.
   • Ensure the LED light cable is properly routed and connected, if applicable.
4. Plnění vodou: Fill the fountain reservoir with distilled water until the pump is fully submerged and the water level is adequate for circulation. Avoid overfilling. Using distilled water helps prevent mineral buildup.
5. Připojení napájení: Plug the power cord into a grounded electrical outlet. Ensure the cord is routed safely to avoid tripping hazards and is protected from water.

Figure 2: Proper placement of the fountain on a stable, level surface.

Návod k obsluze

Once the fountain is set up and filled with water, operation is straightforward:

• Zapínání: Plug the power cord into the electrical outlet. The pump will immediately begin circulating water, and the LED lights will illuminate.
• Průtok vody: Water will flow from the top of the sphere, cascading down its textured surface into the reservoir below.
• LED světla: The integrated LED lights are designed to operate automatically when the fountain is powered on, providing illumination to the water flow.
• Hladina vody: Regularly check the water level. Due to evaporation, especially in outdoor or dry environments, the water level will decrease over time. Refill as needed to ensure the pump remains fully submerged. Operating the pump without sufficient water can cause damage.
• Vypínání: To turn off the fountain, simply unplug the power cord from the electrical outlet.

Figure 3: Detail of water flowing over the sphere, illuminated by LED lights.

Poznámka: Do této příručky nebyla k dispozici žádná oficiální videa k produktům od prodejce.

Údržba

Pravidelná údržba je klíčová pro dlouhou životnost a optimální výkon vaší vodní fontány.

• Čištění:
  • The fountain should be wiped down periodically with a soft cloth to remove dust and debris.
  • The water tank should be emptied, cleaned, and refilled at least once a month, or more frequently depending on usage and water quality, to prevent algae and mineral buildup.
  • For stubborn mineral deposits, use a non-abrasive cleaner specifically designed for fountain or hard water stains.
• Kvalita vody: Using distilled water is highly recommended to minimize mineral buildup and prolong the life of the pump and fountain components.
• Péče o pumpu:
  • Periodically clean the pump to remove any accumulated debris, such as leaves or sediment, which can obstruct water flow and reduce pump efficiency.
  • The pump features an auto shut-off sensor to protect it from overheating if water levels become too low. However, consistent low water levels should be avoided.
• Winterization (for Outdoor Use): In regions with freezing temperatures, it is essential to drain all water from the fountain and pump before the first frost. Store the fountain indoors in a dry, protected area to prevent damage from freezing and thawing cycles.

Odstraňování problémů

For more detailed troubleshooting or issues not listed here, please refer to the full user manual PDF available for download or contact customer support.

Specifikace

Záruka a podpora

Záruka výrobce

This Xbrand water fountain comes with a limited 1-year, hassle-free manufacturer's warranty od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání a servisu. Uschovejte si prosím doklad o koupi pro případ uplatnění záruky.

Zákaznická podpora

For any questions, technical assistance, or warranty claims, please contact XBrand customer support. Refer to the official product packaging or the full user manual PDF for specific contact details.

You can also find additional information and a downloadable PDF version of this manual at the following link:

Stáhnout kompletní uživatelskou příručku (PDF)