ID-COOLING FROSTFLOW X 240 Snow CPU Liquid Cooler User Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your ID-COOLING FROSTFLOW X 240 Snow CPU Liquid Cooler. This All-In-One (AIO) liquid cooling system is designed to provide efficient heat dissipation for your Central Processing Unit (CPU), ensuring stable performance and longevity. Please read this manual thoroughly before proceeding with installation to ensure correct setup and optimal performance.

Image 1: The ID-COOLING FROSTFLOW X 240 Snow CPU Liquid Cooler, featuring a white radiator, two 120mm PWM fans, and a white LED pump block.

2. Bezpečnostní informace

• Always disconnect power from your computer before installing or servicing any components.
• S komponenty zacházejte opatrně, abyste předešli jejich poškození.
• Chraňte výrobek před vlhkostí a extrémními teplotami.
• Před zapnutím systému se ujistěte, že jsou všechna připojení zajištěna.
• Do not attempt to open or modify the liquid cooler unit, as this may void the warranty and cause damage.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• 1x FROSTFLOW X 240 Snow CPU Liquid Cooler (Radiator, Pump, Tubing)
• 2x 120mm PWM ventilátory
• Intel Mounting Kit (Backplate, Standoffs, Screws for LGA2066/2011/1151/1150/1155/1156/1200/1700)
• AMD Mounting Kit (Backplate, Standoffs, Screws for AM4/AM5)
• Termální pasta
• Rozdělovací kabel ventilátoru
• Uživatelská příručka

4. Specifikace

5. Nastavení a instalace

Follow these steps to install your FROSTFLOW X 240 Snow liquid cooler. Refer to your motherboard and PC case manuals for specific details on component placement and cable routing.

5.1 Příprava systému

1. Vypnout: Shut down your computer and disconnect the power cable from the wall outlet.
2. Přístup: Otevřete skříň počítače, abyste se dostali k základní desce a procesoru.
3. Clean CPU: If replacing an existing cooler, carefully remove it and clean any old thermal paste from the CPU's Integrated Heat Spreader (IHS) using isopropyl alcohol and a lint-free cloth.

5.2 Instalace chladiče a ventilátorů

The FROSTFLOW X 240 Snow features a 240mm radiator and two 120mm PWM fans for optimal heat dissipation.

Image 2: The 240mm radiator and pump unit, designed for efficient heat transfer.

Image 3: Dimensions of the 120mm PWM fan (120mm x 120mm x 25mm).

1. Attach Fans: Secure the two 120mm PWM fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Montáž chladiče: Install the radiator assembly into your PC case. Common mounting locations include the top or front of the case. Use the appropriate screws to secure it firmly.

5.3 Instalace vodního bloku CPU

The water block includes a white LED for visual appeal.

Image 4: Close-up of the pump block, highlighting the white LED illumination.

1. Naneste termální pastu: Apply a small, pea-sized amount of the included thermal paste to the center of your CPU's IHS. Do not spread it manually; the pressure from the water block will distribute it evenly.
2. Instalace zadní desky: For Intel sockets, install the universal backplate behind the motherboard. For AMD sockets, use the existing AMD backplate.
3. Připevněte distanční sloupky: Screw the appropriate standoffs into the backplate (Intel) or directly into the motherboard (AMD).
4. Montáž vodního bloku: Carefully place the water block onto the CPU, aligning the mounting holes with the standoffs. Secure it with the provided thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

5.4 Připojení kabelů

Proper cable management ensures optimal airflow and aesthetics.

Image 5: The liquid cooler installed in a white PC build, showcasing the white LED lighting on the fans and pump.

1. Připojení ventilátoru: Connect the two 120mm PWM fans to the included fan splitter cable. Then, connect the splitter cable to a 4-pin CPU_FAN or AIO_PUMP header on your motherboard.
2. Připojení čerpadla: Connect the pump's 3-pin or 4-pin power cable to an available AIO_PUMP or CPU_OPT header on your motherboard. Ensure it receives full power for optimal pump operation.
3. LED Connection: The white LED on the pump and fans typically draws power from the same connections as the fans/pump. No separate RGB header is usually required for this model's white LED.

6. Návod k obsluze

Once installed, the FROSTFLOW X 240 Snow operates automatically, adjusting fan and pump speeds based on CPU temperature via PWM control.

Image 6: Detail of a 120mm PWM fan, capable of speeds between 700-1800 RPM for precise control.

6.1 První zapnutí

1. After reassembling your PC, connect the power cable and power on the system.
2. Observe the fans and pump for proper operation. The fans should spin, and the pump LED should illuminate.
3. Enter your motherboard's BIOS/UEFI settings to confirm that the CPU fan/pump headers are detected and configured for PWM control.

6.2 Monitorování teplot

Use monitoring software (e.g., HWMonitor, CPU-Z) to check your CPU temperatures during idle and load conditions. Optimal temperatures vary by CPU model, but generally, idle temperatures should be below 50°C and load temperatures below 85°C.

6.3 Provoz s nízkou hlučností

The fans are equipped with de-vibration rubber pads to minimize noise during operation.

Image 7: Close-up of the de-vibration rubber pads on the fan corners, designed to reduce operational noise.

7. Údržba

Regular maintenance helps ensure the longevity and performance of your liquid cooler.

• Čištění prachu: Pravidelně čistěte prach z žeber chladiče a lopatek ventilátoru pomocí stlačeného vzduchu. Během čištění se ujistěte, že se ventilátory neotáčejí, aby nedošlo k poškození.
• Zkontrolujte připojení: Occasionally inspect all cable connections (fan, pump) to ensure they are secure.
• Inspekce trubek: Zkontrolujte hadici, zda nevykazuje známky zlomení, netěsností nebo poškození.

8. Řešení problémů

Pokud narazíte na problémy s kapalinovým chladičem, podívejte se na následující běžné problémy a jejich řešení:

If the issue persists after attempting these solutions, please contact ID-COOLING customer support.

9. Oficiální video produktu

Watch the official product video from ID-COOLING for a visual overview of the FROSTFLOW X 240 Snow.

10. Záruka a podpora

ID-COOLING products are designed for reliability and performance. This product typically comes with a manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official ID-COOLING webpodrobné záruční podmínky naleznete na webu.

For technical support, troubleshooting assistance, or warranty claims, please contact ID-COOLING customer service through their official webwebu nebo kontaktních informací uvedených v dokumentaci k produktu.

Online zdroje:

• ID-COOLING Official Webmísto: www.idcooling.com
• Product Support Page: Refer to the specific product page on the ID-COOLING webweb s častými dotazy a dalšími zdroji.