1. Konec produktuview
The Baseus 42LED Wireless Under Cabinet Lighting is a versatile and energy-efficient lighting solution designed for various indoor and outdoor applications. It features 42 energy-saving LEDs, offering 100 lumens of brightness with a color rendering index (CRI) greater than 80 Ra. This light is dimmable, has touch control, and allows for adjustable color temperature and brightness settings. Its rechargeable battery and magnetic installation provide convenience and flexibility.
Obrázek 1: Přesview of the Baseus Wireless Magnetic Rechargeable Under Cabinet Lighting, highlighting its adjustable angle, magnetic attachment, touch control, and rechargeable nature.
2. Obsah balení
Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:
- 1 x Baseus 42LED Wireless Under Cabinet Lighting Unit
- 1 x magnetická základna
- Nabíjecí kabel 1 x USB-C
- 1 x 3M Magnetic Strip Base
- 1 x Uživatelská příručka (tento dokument)
3. Nastavení a instalace
The Baseus Under Cabinet Light offers flexible installation options due to its magnetic design.
3.1 Nabíjení zařízení
Before first use, fully charge the light. The built-in 1800mAh battery takes approximately 3-4 hours to fully charge via the USB-C port. A full charge provides about 3 hours of high brightness or up to 24 hours in low brightness mode.
Figure 2: The light unit being charged via its USB-C port, with indicators for approximate battery life at low, medium, and high brightness settings.
3.2 Možnosti montáže
- Přímá magnetická adsorpce: If the desired surface is made of iron or a magnetic material, the light can be directly adsorbed onto it. This allows for easy removal for charging or repositioning.
- Adhesive Magnetic Strip: For non-magnetic surfaces, use the included 3M magnetic strip base.
- Důkladně očistěte požadovaný povrch pro instalaci, aby nebyl prach a mastnota.
- Peel off the protective film from one side of the 3M adhesive on the magnetic strip base.
- Firmly press the magnetic strip base onto the cleaned surface and hold for 30 seconds to ensure strong adhesion.
- Once the magnetic base is securely attached, the light unit can be magnetically affixed to it. The light can be easily removed from this base for charging or relocation.
Figure 3: Illustration of the magnetic attachment mechanism, showing how the light unit clicks into place on its magnetic base.
4. Návod k obsluze
The light features intuitive touch controls for easy operation.
4.1 Zapnutí/vypnutí
- Zhasnout světlo ON or VYPNUTO, gently touch the power icon on the light's control panel.
4.2 Nastavení jasu
- The light supports step-less dimming. To adjust brightness, press and hold the '+' or '-' icons on the control panel. The brightness will gradually increase or decrease. Release when the desired brightness is reached.
4.3 Nastavení teploty barev
- The light offers three color temperature settings:
- 3000K (teplá bílá): Ideal for creating a cozy and inviting atmosphere.
- 4000K (Mix Light): A balanced light suitable for general tasks.
- 5000K (studená bílá): Bright and clear light, good for task-oriented areas.
- To cycle through these color temperatures, briefly touch the color temperature icon (sun/lightbulb symbol) on the control panel. The light also features a color memory function, retaining the last used color temperature setting.
Figure 4: Visual representation of the three available color temperature modes and the stepless brightness adjustment feature.
4.4 Nastavení úhlu
- The light unit can be adjusted by 80 degrees on its magnetic base, allowing you to direct the light precisely where needed.
Obrázek 5: Přamples of the light's application in different environments, demonstrating its versatility.
5. Údržba
- Čištění: Use a soft, dry cloth to clean the surface of the light. Avoid using abrasive cleaners or solvents.
- Péče o baterie: To prolong battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes. Store the light in a cool, dry place if not used for extended periods.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | Baterie je vybitá. | Nabijte světlo pomocí dodaného kabelu USB-C. |
| Světlo je tlumené nebo bliká. | Slabá baterie. | Nabijte světlo. |
| Dotykové ovládání nereaguje. | Surface is dirty or wet; temporary software glitch. | Ensure the control panel is clean and dry. Try turning the light off and on again. |
| Light falls from mounting surface. | Magnetická základna není bezpečně připevněna nebo je povrch nevhodný. | Ensure the 3M adhesive is applied to a clean, dry, and smooth surface. For direct magnetic adsorption, ensure the surface is sufficiently magnetic. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Baseus |
| Číslo modelu | L3-JP-U |
| Typ světelného zdroje | LED |
| Počet světelných zdrojů | 42 |
| Jas | 100 lumenů |
| Teplota barev | Adjustable (3000K, 4000K, 5000K) |
| Index podání barev (CRI) | > 80 Ra |
| Zdroj napájení | Battery Powered (Rechargeable USB-C) |
| Kapacita baterie | Lithium-polymer 1800 mAh |
| Doba nabíjení | 3-4 hodin |
| Výdrž baterie (přibližně) | 3 hrs (high brightness), 24 hrs (low brightness) |
| Kontrolní metoda | Dotykové ovládání |
| Nastavení úhlu | 80° |
| Typ montáže | Magnetický |
| Wattage | 5 wattů |
| Rozměry produktu | 11.18"H x 1.53"Š x 1.88"V |
| Hmotnost položky | 2.29 unce (65 gramů) |
| Materiál | Acrylonitrile Butadiene Styrene, Plastic, Polycarbonate |
| Vnitřní/venkovní použití | Uvnitř, venku |
| Montáž Vyžadována | Ano |
8. Záruka a podpora
Baseus provides a Lifetime Warranty for this product. For any product quality issues or support inquiries, please contact Baseus customer service via email. A free replacement will be offered after confirmation of the issue.
For further assistance, please refer to the official Baseus webnebo kontaktujte jejich tým zákaznické podpory.