1. Úvod
This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your X-PRO X20 150CC Moped Scooter. Please read it thoroughly before operating the scooter to ensure your safety and the longevity of the product. Keep this manual in a safe place for future reference.
2. Bezpečnostní informace
Always wear a helmet and appropriate safety gear when operating the scooter. Observe all local traffic laws and regulations. Never operate the scooter under the influence of alcohol or drugs. Ensure all pre-ride checks are performed before each use.
- Vždy proveďte předjízdnou kontrolu.
- Familiarize yourself with all controls before riding.
- Udržujte správný tlak v pneumatikách.
- Nepřekračujte maximální nosnost.
- Ensure proper lighting is functional, especially at night.
3. Nastavení a počáteční montáž
Your X-PRO X20 scooter is shipped partially assembled in a protective crate. Careful unpacking and assembly are required before first use.
3.1 Uncrating and Inspection
Image: The X-PRO X20 Moped Scooter securely packaged within its metal shipping crate, ready for uncrating.
Carefully remove the outer cardboard packaging and then dismantle the metal frame of the shipping crate. Inspect the scooter for any visible damage that may have occurred during transit. Report any damage to your dealer immediately.
Image: The exterior cardboard box for the X-PRO X20 Moped Scooter, indicating brand and model.
3.2 Instalace řídítek
Attach the handlebars to the steering column. Ensure all bolts are tightened to the manufacturer's specifications. Check for free movement and proper alignment.
3.3 Mirror Installation
Přišroubujte zadní částview mirrors into their designated mounts on the handlebars. Adjust them to provide a clear view zadní části.
3.4 Připojení baterie
Locate the battery compartment, typically under the seat. Connect the positive (red) terminal first, then the negative (black) terminal. Ensure connections are secure.
3.5 Kontroly provozních kapalin
Before starting, check the engine oil level, brake fluid level, and fuel level. Top up as necessary according to the specifications.
Obrázek: Boční view of the assembled X-PRO X20 Moped Scooter, showcasing its design and 13-inch aluminum wheels.
Obrázek: Přední strana view of the X-PRO X20 Moped Scooter, highlighting the large headlight and overall front design.
4. Návod k obsluze
4.1 Startování motoru
- Ensure the scooter is on its center stand.
- Vložte klíč do zapalování a otočte jím do polohy „ON“.
- Squeeze the left brake lever (rear brake).
- Press the electric start button. If the engine does not start, use the kick-start lever.
- Allow the engine to warm up for a few moments before riding.
4.2 Ovládací prvky Overview
- Škrticí klapka: Right handlebar grip. Rotate to accelerate.
- Přední brzda: Right handlebar lever.
- Zadní brzda: Left handlebar lever.
- Spínač světlometů: Controls high/low beam.
- Směrová světla: Left handlebar switch.
- Roh: Left handlebar button.
4.3 Bezpečná jízda
Always maintain a safe distance from other vehicles. Signal your intentions clearly. Be aware of road conditions and adjust your speed accordingly. Avoid sudden braking or acceleration.
5. Údržba
Regular maintenance is crucial for the performance, safety, and longevity of your scooter.
5.1 Denní kontroly
- pneumatiky: Check pressure and tread depth.
- brzdy: Ensure levers operate smoothly and brakes engage effectively.
- Světla: Verify headlights, taillights, brake lights, and turn signals are working.
- Kapaliny: Check engine oil and brake fluid levels.
5.2 Plánovaná údržba
- Motorový olej: Change every 1,000 km or as recommended in the service schedule.
- Vzduchový filtr: Inspect and clean/replace regularly.
- Zapalovací svíčka: Inspect and replace as needed.
- Brzdové destičky: Inspect for wear and replace when necessary.
- Baterie: Check terminals for corrosion and ensure proper charge.
5.3 Čištění
Clean your scooter regularly with mild soap and water. Avoid high-pressure washers directly on electrical components. Dry thoroughly after washing.
6. Řešení problémů
This section covers common issues and basic solutions. For complex problems, consult a qualified technician.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Motor nenastartuje | No fuel, weak battery, faulty spark plug, kill switch engaged | Check fuel level, charge/replace battery, inspect/replace spark plug, check kill switch position |
| Světla nefungují | Blown fuse, faulty bulb, wiring issue | Check fuses, replace bulbs, inspect wiring connections |
| Brzdy se zdají být měkké | Low brake fluid, air in brake lines, worn brake pads | Check fluid level and top up, bleed brake lines, replace brake pads |
7. Specifikace
Key technical specifications for the X-PRO X20 150CC Moped Scooter:
- Název modelu: X20
- Typ motoru: 150cc, Air-cooled, 4-stroke
- Počet kol: 2
- Velikost kola: 13 palce
- Materiál kola: Hliník
- Materiál rámu: Hliník
- Styl brzdy: Zadní brzdění
- Věkové rozmezí: Dospělý
- Číslo dílu výrobce: MC-N023
8. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact your authorized X-PRO dealer or the manufacturer directly. Keep your purchase receipt and scooter's VIN (Vehicle Identification Number) readily available when contacting support.