1. Úvod
This manual provides comprehensive instructions for the safe and efficient installation and operation of your Mounting Dream MD2285-XL 40-Inch Long Arm Full Motion TV Wall Mount. This mount is designed to securely hold most 42-90 inch televisions with VESA patterns ranging from 200x100mm to 800x400mm and a maximum weight capacity of 150 lbs. It is compatible with 16-inch, 18-inch, and 24-inch wood stud spacing.
Please read all instructions carefully before beginning installation. If you have any questions, refer to the troubleshooting section or contact customer support.
2. Důležité bezpečnostní informace
- Nosnost: Nepřekračujte maximální nosnost 68 kg. Překročení tohoto limitu může vést k vážnému zranění nebo poškození majetku.
- Velikost televizoru: This mount is designed for 42-90 inch TVs. Ensure your TV falls within this range.
- Kompatibilita VESA: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) is between 200x100mm and 800x400mm.
- Typ stěny: This mount is intended for installation on wood studs (16", 18", 24" spacing), solid concrete, or brick walls. NEINSTALUJTE do sádrokartonu samostatně.
- Profesionální instalace: Pokud si nejste jisti postupem instalace nebo vhodností vaší zdi, poraďte se s kvalifikovaným odborníkem.
- Kontrola součástí: Before installation, ensure all parts are present and undamaged. Do not use damaged parts.
- Správa kabelů: Secure all cables to prevent accidental disconnections or damage when adjusting the TV.
3. Obsah balení
Zkontrolujte prosím, zda jsou všechny součásti součástí balení:
Image: The Mounting Dream MD2285-XL TV wall mount, including the wall plate, TV brackets, articulating arms, and a bubble level. This image displays all the main components of the product.
- Sestava nástěnné desky
- Držáky na televizi (2x)
- Sestava kloubového ramene
- Sada montážního hardwaru (různé šrouby, podložky, distanční podložky)
- Úroveň bublin
- Stahovací pásky (pro správu kabelů)
- Montážní šablona
4. Požadované nástroje (nejsou součástí dodávky)
- Vyhledávač sloupků (pro instalaci dřevěných sloupků)
- Vrtat
- Drill Bits (appropriate for pilot holes and lag bolts)
- Nástrčný klíč
- Šroubovák s křížovou hlavou
- Tužka
- Měřicí páska
- Kladivo (na betonové kotvy)
5. Nastavení a instalace
Follow these steps carefully to ensure a secure installation. It is recommended to have at least two people for TV mounting.
5.1. Kontroly před instalací
- Ověření kompatibility televizoru:
Ensure your TV is between 42-90 inches and weighs no more than 150 lbs. Check the VESA mounting pattern on the back of your TV. It should be between 200x100mm and 800x400mm.
Image: Graphic illustrating TV size compatibility (42-90 inches) and maximum weight capacity (150 lbs).
Image: Diagram showing how to measure horizontal and vertical VESA mounting holes on the back of a TV.
- Zkontrolujte kabelové zásuvky: Ensure the mount will not block any cable outlets on your TV.
Image: Illustration of checking TV cable outlets to ensure they are not obstructed by the mount.
- Identifikujte typ stěny: Determine if your wall is made of wood studs, solid concrete, or brick. Do not install on drywall alone.
Image: Visual guide showing compatible wall types: Concrete Wall, Wood Wall (16", 18", 24" studs), and Brick Wall. A warning against drywall-only installation is present.
5.2. Kroky instalace
- Attach Brackets to TV Back: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
Image: A three-panel image showing the installation steps: 1) Attach brackets to TV back, 2) Install the wall plate, 3) Hang the TV onto the wall plate.
- Označte montážní otvory: Use the provided mounting template and a pencil to mark the desired location for the wall plate on your wall. Ensure it is level using the bubble level.
Image: A person marking mounting holes on a wall using a template and pencil, indicating stud spacing options.
- Vrtací pilotní otvory: Drill pilot holes at the marked locations. For wood studs, use a drill bit slightly smaller than the lag bolts. For concrete/brick, use a masonry drill bit and insert anchors (if provided or purchased separately).
- Připevněte nástěnnou desku: Secure the wall plate assembly to the wall using the lag bolts (and anchors for concrete/brick). Use a socket wrench to tighten securely.
Image: A person using a wrench to secure the wall plate to the wall, showing the attachment points.
- Zavěste televizi: Carefully lift the TV (with brackets attached) and hook it onto the wall plate. Ensure it is properly seated.
- Připevnění televizoru k nástěnné desce: Use the provided clips or screws to lock the TV brackets to the wall plate, preventing accidental dislodgement.
Obrázek: Detail view of the TV mount mechanism, highlighting features like simple cable storage, ±3° leveling screws, adjust & lock tilting angle with handle, and clips to lock the TV in place.
6. Návod k obsluze
The MD2285-XL mount offers versatile adjustments for optimal viewIng.
6.1. Prodloužení a zatažení
Gently pull the TV away from the wall to extend the arm up to 40 inches. Push the TV back towards the wall to retract it to a minimum distance of 3 inches. This feature is ideal for corner placement or adjusting viewvzdálenost.
Image: A TV mounted on the wall, with the arm extended 40 inches from the wall and retracted to 3 inches, demonstrating the long extension design.
Image: A TV mounted in a corner, demonstrating the flexibility of the long arm for optimal corner placement.
6.2. Nastavení otočení
The TV can swivel up to 90 degrees left or right, depending on TV size, allowing you to adjust the viewing angle from various positions in the room.
Image: A TV swiveling up to 90 degrees left and right, illustrating the wide viewing angle flexibility.
6.3. Nastavení sklonu
Adjust the TV tilt from +5° (upward) to -12° (downward) to reduce glare and achieve a comfortable viewing angle. Use the tilting adjustment handle to set and lock the desired angle.
Image: A TV tilted backward by 5 degrees and forward by 12 degrees, demonstrating the tilt range for glare reduction.
6.4. Post-Installation Leveling
If the TV is slightly unlevel after installation, you can adjust it by ±3° using the leveling screws on the TV plate.
Image: A TV being adjusted by ±3 degrees for post-installation leveling, ensuring a perfectly horizontal display.
7. Oficiální produktová videa
7.1. Mounting Dream Long Arm TV Wall Mount for Most 42-90 Inch TV
Popis videa: Toto video poskytuje celkový přehledview of the Mounting Dream Long Arm TV Wall Mount, showcasing its features and compatibility with 42-90 inch TVs. It demonstrates the mount's flexibility in various home settings.
7.2. 40" Extra Long Extension TV Mount MD2285-XL
Video Description: This video specifically highlights the 40-inch extra-long extension feature of the MD2285-XL TV mount. It illustrates how the mount can extend significantly from the wall to provide optimal viewing úhly.
7.3. Mounting Dream Long Arm TV Mount MD2285-XL
Video Description: This video provides a detailed look at the MD2285-XL mount, demonstrating its full motion capabilities including swivel, tilt, and extension, emphasizing its robust design and ease of use.
8. Údržba
- Pravidelná kontrola: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou pevné a bezpečné.
- Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Mazání: Pokud kloubová ramena ztuhnou, lze na otočné body nanést malé množství maziva na bázi silikonu.
9. Řešení problémů
- Televizor není vodorovně umístěn: Use the post-installation leveling screws to adjust the TV by ±3°.
- Držák se zdá být uvolněný: Re-check all wall plate and TV bracket screws to ensure they are securely tightened.
- Obtíže s pohybem paže: Apply a small amount of silicone lubricant to the pivot points of the articulating arm. Ensure no cables are obstructing movement.
- TV not fitting: Double-check your TV's VESA pattern, size, and weight against the specifications in this manual.
10. Specifikace
| Číslo modelu | MD2285-XL |
| Kompatibilita velikosti TV | 42-90 palců |
| Maximální nosnost | 150 lb (68 kg) |
| Kompatibilita VESA | 200x100mm až 800x400mm |
| Prodloužení od zdi | 3 palce (zasunuté) až 40 palce (vysunuté) |
| Úhel otočení | ±90 degrees (TV size dependent) |
| Úhel náklonu | +5° až -12° |
| Nastavení úrovně | ±3° po instalaci |
| Rozteč stěnových sloupků | 16", 18", 24" |
| Materiál | Kov |
| Barva | Černý |
11. Záruka a zákaznická podpora
Mounting Dream products are backed by a 10-year warranty, ensuring quality and durability. For any questions regarding product installation, operation, or general inquiries, our world-class customer service team is available 7 days a week to assist you.
Please visit the official Mounting Dream webnebo kontaktujte náš tým podpory pro pomoc.
