FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Úvod

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Bezpečnostní informace

• Před montáží se ujistěte, že jsou všechny díly přítomné a nepoškozené.
• Assembly may require two people due to the weight of components.
• Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Neumisťujte tekutiny přímo na ovládací panel nebo do blízkosti elektrických součástí.
• Používejte pouze dodaný napájecí adaptér.
• Do not disassemble or modify the desk's motor or control system.

3. Obsah balení

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Zvedací sloupky (nohy)
• Nosník
• Podpěrné desky
• Motor
• Control Panel (Keypad)
• Napájecí adaptér a kabely
• Clamp Power Strip with 3 AC Outlets and 2 USB Ports
• Kabel pro správu kabelů
• Assembly Hardware (screws, hex keys, wrench)
• Návod k použití

4. Montážní návod

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Příprava pracovní plochy: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Nainstalujte motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Instalace nohou stolu: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Připojení kabeláže: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Připojte Clamp Napájecí proužek: Clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Závěrečná kontrola: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Návod k obsluze

Váš stůl FLEXISPOT EN2 je vybaven intuitivním digitálním ovladačem se 6 tlačítky pro snadné nastavení výšky a uložení předvoleb do paměti.

• Tlačítka nahoru/dolů (šipky): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Předvolby paměti (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Nastavte stůl do požadované výšky pomocí šipek nahoru/dolů.
  2. Press the 'M' button. The LED display will show 'S-'.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Funkce proti kolizi: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Vlastnosti

• Odnímatelná stolní zásuvka: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ample Celý kus Desktop: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 paměťová tlačítka: 6-button digital controller with 4 programmable memory presets.
• Motorizované nastavení výšky: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Odolná konstrukce: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Správa kabelů: Integrated cable management device to keep your workspace tidy.

7. Specifikace

8. Údržba

• Čištění: Otřete povrchy stolu reklamouamp tkanina. Vyhněte se agresivním chemikáliím, které mohou poškodit povrch.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Kontrola kabelů: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Řešení problémů

Pokud narazíte na nějaké problémy se stolem, podívejte se na následující běžná řešení:

• Stůl se nehýbe: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Ovládací panel nereaguje: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Časté spouštění protikolizního systému: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Záruka a podpora

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• 5-letá záruka: Zahrnuje rámy, motory a další mechanická zařízení.
• 2-letá záruka: Zahrnuje ovladače, spínače a elektroniku.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.