ECHOGEAR EGLF324 Full Motion TV Wall Mount Instruction Manual

1. Bezpečnostní informace

Please read this entire manual before installation and use. If you have any questions, contact ECHOGEAR customer support. Improper installation can result in property damage or personal injury.

• Nosnost: Nepřekračujte maximální nosnost 50 kg. Tento držák je určen pro televizory s úhlopříčkou od 43" do 82".
• Stud Mounting Only: This mount is designed for installation into wood studs. NE mount into drywall alone. Ensure studs are located accurately.
• Verify VESA Pattern: Ensure your TV's VESA pattern (mounting holes on the back) is compatible with this mount (200x100 to 600x400).
• Nástroje: Use appropriate tools for installation. A ratchet is recommended for securing lag bolts.
• Pomoc: Due to the size and weight of TVs, two people are recommended for safe installation.

2. Obsah balení

Verify all components are present before beginning installation. If any parts are missing or damaged, contact ECHOGEAR customer support.

Zahrnutý hardware:

• Full Motion TV Wall Mount Assembly
• Extension Brackets (for 24" stud spacing)
• Vrtací šablona
• Assortment of TV screws and spacers
• Lag Bolts and Washers
• Spony pro správu kabelů (2x)
• End Caps for aesthetic finishing

3. Vlastnosti produktu

The ECHOGEAR EGLF324 Full Motion TV Wall Mount offers versatile positioning and robust support for your television.

• Univerzální kompatibilita: Supports 43" to 82" TVs weighing up to 110 lbs. Compatible with VESA patterns from 200x100 to 600x400.
• Flexible Stud Spacing: Designed to accommodate both 16" and 24" stud spacing with included extension brackets.
• Plná schopnost pohybu: Užijte si optimální viewing angles with 19" of extension, 140° of swivel, and 15° of tilt.
• Post-Installation Adjustments: Allows for 5.4" lateral shift (left or right) and ±3° post-installation leveling for perfect screen alignment.
• Integrovaná správa kabelů: Features a through-arm channel and two cable clips to keep cables organized and out of sight.

4. Instalace

Follow these steps carefully to install your ECHOGEAR EGLF324 TV Wall Mount. A detailed video guide is also available below.

Kroky instalace:

1. Připevnění držáků k TV: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the hardware kit.
2. Find Studs: Use a stud finder to locate the center of your wood studs in the desired mounting location. Mark the stud centers.
3. Šablona pro vrtání pozice: Tape the included drilling template to the wall, aligning it with your marked stud centers. Use a level to ensure it is perfectly horizontal.
4. Vrtací pilotní otvory: Drill pilot holes through the template at the marked locations.
5. Bezpečná nástěnná deska: Attach the wall plate of the mount to the wall using the provided lag bolts and washers. If your studs are 24" apart, attach the extension brackets to the wall plate first, then secure the entire assembly to the wall.
6. Zavěste televizi: Carefully lift your TV and hook the TV brackets onto the wall plate.
7. Zabezpečená televize: Tighten the security screws on the TV brackets to lock the TV onto the mount.
8. Správa kabelů: Route your TV cables through the integrated cable management channels on the mount arms and secure them with the included cable clips.
9. Upravte a vyrovnejte: Make any final adjustments to the TV's position, including lateral shift and post-installation leveling, to achieve your desired viewúhel.

Video Installation Guide:

5. Návod k obsluze

Once installed, your ECHOGEAR EGLF324 mount allows for easy adjustment of your TV's position.

• Rozšíření: Gently pull the TV screen forward to extend the mount up to 19 inches from the wall.
• Otočný: Carefully push or pull the sides of the TV screen to swivel it left or right, up to 140 degrees.
• Náklon: To adjust the tilt angle (up to 15 degrees), loosen the tilt adjustment knobs on the TV brackets, set the desired angle, and then re-tighten the knobs securely.
• Boční posun: For minor horizontal adjustments after installation, the TV can be slid left or right by up to 5.4 inches on the wall plate.
• Vyrovnání: The mount allows for ±3 degrees of post-installation leveling. Consult the manual for specific instructions on how to adjust this feature.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho televizního držáku.

• Pravidelné kontroly: Periodically check that all screws and connections are secure. Re-tighten if necessary.
• Čištění: Držák čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Mazání: Moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact support.

7. Řešení problémů

If you encounter issues during installation or use, refer to the following common solutions.

• TV není vodorovně: Use the post-installation leveling feature (±3 degrees) to correct the TV's horizontal alignment. Ensure the wall plate itself was installed level.
• Difficulty Moving TV: Check for any obstructions or overtightened bolts. Ensure cables are not snagged.
• Mount se zdá být uvolněný: Immediately remove the TV and re-check all wall plate and TV bracket connections. Ensure lag bolts are securely fastened into the center of the wood studs.
• Chybějící části: Refer to the package contents list. Contact ECHOGEAR customer support for replacement parts.

8. Specifikace

9. Záruka a podpora

ECHOGEAR stands by its products. For warranty information, technical assistance, or to report missing/damaged parts, please contact ECHOGEAR customer support.

Kontaktní údaje: Refer to the ECHOGEAR official webNejnovější kontaktní údaje naleznete na webových stránkách nebo na obalu produktu.